| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220415115633.575010-12-konrad.dybcio@somainline.org>
Date: Fri, 15 Apr 2022 13:56:21 +0200
From: Konrad Dybcio <konrad.dybcio@...ainline.org>
To: ~postmarketos/upstreaming@...ts.sr.ht
Cc: martin.botka@...ainline.org,
angelogioacchino.delregno@...ainline.org,
marijn.suijten@...ainline.org, jamipkettunen@...ainline.org,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 11/23] ARM: dts: qcom-msm8974-klte: Use &labels
Use &labels to align with the style used in new DTS and apply tiny
style fixes.
Signed-off-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
---
.../boot/dts/qcom-msm8974-samsung-klte.dts | 1247 ++++++++---------
arch/arm/boot/dts/qcom-msm8974.dtsi | 4 +-
2 files changed, 608 insertions(+), 643 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index daafc4d31fc5..823dda35fb16 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -13,201 +13,42 @@ / {
aliases {
serial0 = &blsp1_uart1;
mmc0 = &sdhc_1; /* SDC1 eMMC slot */
- mmc1 = &sdhc_2; /* SDC2 SD card slot */
+ mmc1 = &sdhc_3; /* SDC2 SD card slot */
};
chosen {
stdout-path = "serial0:115200n8";
};
- smd {
- rpm {
- rpm_requests {
- pma8084-regulators {
- compatible = "qcom,rpm-pma8084-regulators";
- status = "okay";
-
- pma8084_s1: s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- regulator-always-on;
- };
-
- pma8084_s2: s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pma8084_s3: s3 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- pma8084_s4: s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_s5: s5 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- };
-
- pma8084_s6: s6 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pma8084_l1: l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pma8084_l2: l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pma8084_l3: l3 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pma8084_l4: l4 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pma8084_l5: l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l6: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l7: l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l8: l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l9: l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pma8084_l10: l10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pma8084_l11: l11 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- pma8084_l12: l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- pma8084_l13: l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pma8084_l14: l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pma8084_l15: l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- pma8084_l16: l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- pma8084_l17: l17 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- pma8084_l18: l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- pma8084_l19: l19 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- pma8084_l20: l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
-
- pma8084_l21: l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
-
- regulator-allow-set-load;
- regulator-system-load = <200000>;
- };
-
- pma8084_l22: l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3300000>;
- };
-
- pma8084_l23: l23 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- pma8084_l24: l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- };
-
- pma8084_l25: l25 {
- regulator-min-microvolt = <2100000>;
- regulator-max-microvolt = <2100000>;
- };
-
- pma8084_l26: l26 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2050000>;
- };
-
- pma8084_l27: l27 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pma8084_lvs1: lvs1 {};
- pma8084_lvs2: lvs2 {};
- pma8084_lvs3: lvs3 {};
- pma8084_lvs4: lvs4 {};
-
- pma8084_5vs1: 5vs1 {};
- };
- };
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ volume-down {
+ label = "volume_down";
+ gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+
+ home-key {
+ label = "home_key";
+ gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_HOMEPAGE>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ volume-up {
+ label = "volume_up";
+ gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
};
};
@@ -315,594 +156,718 @@ vreg_panel: panel-regulator {
};
/delete-node/ vreg-boost;
-
- adsp-pil {
- cx-supply = <&pma8084_s2>;
- };
};
-&soc {
- serial@...1e000 {
- status = "okay";
- };
+&blsp1_i2c2 {
+ status = "okay";
- /* blsp2_uart2 */
- serial@...5e000 {
- status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_uart2_pins_active>;
- pinctrl-1 = <&blsp2_uart2_pins_sleep>;
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
- bluetooth {
- compatible = "brcm,bcm43540-bt";
- max-speed = <3000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_pins>;
- device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
- interrupt-parent = <&tlmm>;
- interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wakeup";
- };
- };
+ interrupt-parent = <&pma8084_gpios>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
- gpio-keys {
- compatible = "gpio-keys";
+ vdd-supply = <&max77826_ldo13>;
+ vio-supply = <&pma8084_lvs2>;
pinctrl-names = "default";
- pinctrl-0 = <&gpio_keys_pin_a>;
+ pinctrl-0 = <&touch_pin>;
- volume-down {
- label = "volume_down";
- gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEDOWN>;
- debounce-interval = <15>;
- };
+ syna,startup-delay-ms = <100>;
- home-key {
- label = "home_key";
- gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_HOMEPAGE>;
- wakeup-source;
- debounce-interval = <15>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
};
- volume-up {
- label = "volume_up";
- gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
- linux,input-type = <1>;
- linux,code = <KEY_VOLUMEUP>;
- debounce-interval = <15>;
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
};
};
+};
- pinctrl@...10000 {
- blsp2_uart2_pins_active: blsp2-uart2-pins-active {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "blsp_uart8";
- drive-strength = <8>;
- bias-disable;
- };
+&blsp1_i2c6 {
+ status = "okay";
- blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep {
- pins = "gpio45", "gpio46", "gpio47", "gpio48";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_pins>;
+
+ pmic@60 {
+ reg = <0x60>;
+ compatible = "maxim,max77826";
- bt_pins: bt-pins {
- hostwake {
- pins = "gpio75";
- function = "gpio";
- drive-strength = <16>;
- input-enable;
+ regulators {
+ max77826_ldo1: LDO1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
};
- devwake {
- pins = "gpio91";
- function = "gpio";
- drive-strength = <2>;
+ max77826_ldo2: LDO2 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
};
- };
- sdhc1_pin_a: sdhc1-pin-active {
- clk {
- pins = "sdc1_clk";
- drive-strength = <4>;
- bias-disable;
+ max77826_ldo3: LDO3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
};
- cmd-data {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <4>;
- bias-pull-up;
+ max77826_ldo4: LDO4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- };
- sdhc2_pin_a: sdhc2-pin-active {
- clk-cmd-data {
- pins = "gpio35", "gpio36", "gpio37", "gpio38",
- "gpio39", "gpio40";
- function = "sdc3";
- drive-strength = <8>;
- bias-disable;
+ max77826_ldo5: LDO5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- };
- sdhc2_cd_pin: sdhc2-cd {
- pins = "gpio62";
- function = "gpio";
+ max77826_ldo6: LDO6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
- drive-strength = <2>;
- bias-disable;
- };
+ max77826_ldo7: LDO7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- sdhc3_pin_a: sdhc3-pin-active {
- clk {
- pins = "sdc2_clk";
- drive-strength = <6>;
- bias-disable;
+ max77826_ldo8: LDO8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
};
- cmd-data {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
+ max77826_ldo9: LDO9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- };
- i2c2_pins: i2c2 {
- mux {
- pins = "gpio6", "gpio7";
- function = "blsp_i2c2";
+ max77826_ldo10: LDO10 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2950000>;
+ };
- drive-strength = <2>;
- bias-disable;
+ max77826_ldo11: LDO11 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2950000>;
};
- };
- i2c6_pins: i2c6 {
- mux {
- pins = "gpio29", "gpio30";
- function = "blsp_i2c6";
+ max77826_ldo12: LDO12 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3300000>;
+ };
- drive-strength = <2>;
- bias-disable;
+ max77826_ldo13: LDO13 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
};
- };
- i2c12_pins: i2c12 {
- mux {
- pins = "gpio87", "gpio88";
- function = "blsp_i2c12";
+ max77826_ldo14: LDO14 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
- drive-strength = <2>;
- bias-disable;
+ max77826_ldo15: LDO15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- };
- i2c_touchkey_pins: i2c-touchkey {
- mux {
- pins = "gpio95", "gpio96";
- function = "gpio";
- input-enable;
- bias-pull-up;
+ max77826_buck: BUCK {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
};
- };
- i2c_led_gpioex_pins: i2c-led-gpioex {
- mux {
- pins = "gpio120", "gpio121";
- function = "gpio";
- input-enable;
- bias-pull-down;
+ max77826_buckboost: BUCKBOOST {
+ regulator-min-microvolt = <3400000>;
+ regulator-max-microvolt = <3400000>;
};
};
+ };
+};
- gpioex_pin: gpioex {
- res {
- pins = "gpio145";
- function = "gpio";
+&blsp1_uart2 {
+ status = "okay";
+};
- bias-pull-up;
- drive-strength = <2>;
- };
- };
+&blsp2_i2c6 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c12_pins>;
+
+ fuelgauge@36 {
+ compatible = "maxim,max17048";
+ reg = <0x36>;
+
+ maxim,double-soc;
+ maxim,rcomp = /bits/ 8 <0x56>;
+
+ interrupt-parent = <&pma8084_gpios>;
+ interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&fuelgauge_pin>;
+ };
+};
+
+&blsp2_uart2 {
+ status = "okay";
- wifi_pin: wifi {
- int {
- pins = "gpio92";
- function = "gpio";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart2_pins_active>;
+ pinctrl-1 = <&blsp2_uart2_pins_sleep>;
- input-enable;
- bias-pull-down;
+ bluetooth {
+ compatible = "brcm,bcm43540-bt";
+ max-speed = <3000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_pins>;
+ device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wakeup";
+ };
+};
+
+&dsi0 {
+ status = "okay";
+
+ vdda-supply = <&pma8084_l2>;
+ vdd-supply = <&pma8084_l22>;
+ vddio-supply = <&pma8084_l12>;
+
+ panel: panel@0 {
+ reg = <0>;
+ compatible = "samsung,s6e3fa2";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
+
+ iovdd-supply = <&pma8084_lvs4>;
+ vddr-supply = <&vreg_panel>;
+
+ reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
+ te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
};
};
+ };
+};
- panel_te_pin: panel {
- te {
- pins = "gpio12";
- function = "mdp_vsync";
+&dsi0_out {
+ remote-endpoint = <&panel_in>;
+ data-lanes = <0 1 2 3>;
+};
- drive-strength = <2>;
- bias-disable;
- };
+&dsi0_phy {
+ status = "okay";
+
+ vddio-supply = <&pma8084_l12>;
+};
+
+&gpu {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&otg {
+ status = "okay";
+
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ ulpi {
+ phy@a {
+ status = "okay";
+
+ v1p8-supply = <&pma8084_l6>;
+ v3p3-supply = <&pma8084_l24>;
+
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
};
};
+};
- sdhci@...24900 {
- status = "okay";
+&pma8084_gpios {
+ gpio_keys_pin_a: gpio-keys-active {
+ pins = "gpio2", "gpio3", "gpio5";
+ function = "normal";
+
+ bias-pull-up;
+ power-source = <PMA8084_GPIO_S4>;
+ };
- vmmc-supply = <&pma8084_l20>;
- vqmmc-supply = <&pma8084_s4>;
+ touchkey_pin: touchkey-int-pin {
+ pins = "gpio6";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PMA8084_GPIO_S4>;
+ };
- bus-width = <8>;
- non-removable;
+ touch_pin: touchscreen-int-pin {
+ pins = "gpio8";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PMA8084_GPIO_S4>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc1_pin_a>;
+ panel_en_pin: panel-en-pin {
+ pins = "gpio14";
+ function = "normal";
+ bias-pull-up;
+ power-source = <PMA8084_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
- sdhci@...64900 {
- status = "okay";
+ wlan_sleep_clk_pin: wlan-sleep-clk-pin {
+ pins = "gpio16";
+ function = "func2";
- max-frequency = <100000000>;
+ output-high;
+ power-source = <PMA8084_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+ };
- vmmc-supply = <&pma8084_l21>;
- vqmmc-supply = <&pma8084_l13>;
+ panel_rst_pin: panel-rst-pin {
+ pins = "gpio17";
+ function = "normal";
+ bias-disable;
+ power-source = <PMA8084_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ };
- bus-width = <4>;
- /* cd-gpio is intentionally disabled. If enabled, an SD card
- * present during boot is not initialized correctly. Without
- * cd-gpios the driver resorts to polling, so hotplug works.
- */
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>;
- // cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+ fuelgauge_pin: fuelgauge-int-pin {
+ pins = "gpio21";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PMA8084_GPIO_S4>;
};
+};
- sdhci@...a4900 {
- status = "okay";
+&remoteproc_adsp {
+ cx-supply = <&pma8084_s2>;
+};
- #address-cells = <1>;
- #size-cells = <0>;
+&remoteproc_mss {
+ cx-supply = <&pma8084_s2>;
+ mss-supply = <&pma8084_s6>;
+ mx-supply = <&pma8084_s1>;
+ pll-supply = <&pma8084_l12>;
+};
- max-frequency = <100000000>;
+&rpm_requests {
+ pma8084-regulators {
+ compatible = "qcom,rpm-pma8084-regulators";
- pinctrl-names = "default";
- pinctrl-0 = <&sdhc3_pin_a>;
+ pma8084_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ };
- vmmc-supply = <&vreg_wlan>;
- vqmmc-supply = <&pma8084_s4>;
+ pma8084_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
- bus-width = <4>;
- non-removable;
+ pma8084_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
- wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
+ pma8084_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- interrupt-parent = <&tlmm>;
- interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
+ pma8084_s5: s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
+ pma8084_s6: s6 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
};
- };
- usb@...55000 {
- status = "okay";
+ pma8084_l1: l1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
- /*extcon = <&smbb>, <&usb_id>;*/
- /*vbus-supply = <&chg_otg>;*/
+ pma8084_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
- hnp-disable;
- srp-disable;
- adp-disable;
+ pma8084_l3: l3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1200000>;
+ };
- ulpi {
- phy@a {
- status = "okay";
+ pma8084_l4: l4 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1225000>;
+ };
- v1p8-supply = <&pma8084_l6>;
- v3p3-supply = <&pma8084_l24>;
+ pma8084_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- /*extcon = <&smbb>;*/
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
- };
+ pma8084_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- };
- i2c@...24000 {
- status = "okay";
+ pma8084_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
+ pma8084_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- touchscreen@20 {
- compatible = "syna,rmi4-i2c";
- reg = <0x20>;
+ pma8084_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
- interrupt-parent = <&pma8084_gpios>;
- interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+ pma8084_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
- vdd-supply = <&max77826_ldo13>;
- vio-supply = <&pma8084_lvs2>;
+ pma8084_l11: l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&touch_pin>;
+ pma8084_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- syna,startup-delay-ms = <100>;
+ pma8084_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
- #address-cells = <1>;
- #size-cells = <0>;
+ pma8084_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- rmi4-f01@1 {
- reg = <0x1>;
- syna,nosleep-mode = <1>;
- };
+ pma8084_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
- rmi4-f12@12 {
- reg = <0x12>;
- syna,sensor-type = <1>;
- };
+ pma8084_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
};
- };
- i2c@...28000 {
- status = "okay";
+ pma8084_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_pins>;
-
- pmic@60 {
- reg = <0x60>;
- compatible = "maxim,max77826";
-
- regulators {
- max77826_ldo1: LDO1 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- max77826_ldo2: LDO2 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- max77826_ldo3: LDO3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- max77826_ldo4: LDO4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo5: LDO5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo6: LDO6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo7: LDO7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo8: LDO8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo9: LDO9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_ldo10: LDO10 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- max77826_ldo11: LDO11 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2950000>;
- };
-
- max77826_ldo12: LDO12 {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo13: LDO13 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo14: LDO14 {
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- max77826_ldo15: LDO15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- max77826_buck: BUCK {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- max77826_buckboost: BUCKBOOST {
- regulator-min-microvolt = <3400000>;
- regulator-max-microvolt = <3400000>;
- };
- };
+ pma8084_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
};
- };
- i2c@...68000 {
- status = "okay";
+ pma8084_l19: l19 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&i2c12_pins>;
+ pma8084_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ };
- fuelgauge@36 {
- compatible = "maxim,max17048";
- reg = <0x36>;
+ pma8084_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-system-load = <200000>;
+ regulator-allow-set-load;
+ };
- maxim,double-soc;
- maxim,rcomp = /bits/ 8 <0x56>;
+ pma8084_l22: l22 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
- interrupt-parent = <&pma8084_gpios>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
+ pma8084_l23: l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&fuelgauge_pin>;
+ pma8084_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ pma8084_l25: l25 {
+ regulator-min-microvolt = <2100000>;
+ regulator-max-microvolt = <2100000>;
+ };
+
+ pma8084_l26: l26 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2050000>;
};
+
+ pma8084_l27: l27 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pma8084_lvs1: lvs1 {};
+ pma8084_lvs2: lvs2 {};
+ pma8084_lvs3: lvs3 {};
+ pma8084_lvs4: lvs4 {};
+
+ pma8084_5vs1: 5vs1 {};
+ };
+};
+
+&sdhc_1 {
+ status = "okay";
+
+ vmmc-supply = <&pma8084_l20>;
+ vqmmc-supply = <&pma8084_s4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_pin_a>;
+};
+
+&sdhc_2 {
+ status = "okay";
+ max-frequency = <100000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc3_pin_a>;
+
+ vmmc-supply = <&vreg_wlan>;
+ vqmmc-supply = <&pma8084_s4>;
+
+ non-removable;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
};
+};
- adreno@...00000 {
- status = "ok";
+&sdhc_3 {
+ status = "okay";
+ max-frequency = <100000000>;
+
+ vmmc-supply = <&pma8084_l21>;
+ vqmmc-supply = <&pma8084_l13>;
+
+ /*
+ * cd-gpio is intentionally disabled. If enabled, an SD card
+ * present during boot is not initialized correctly. Without
+ * cd-gpios the driver resorts to polling, so hotplug works.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc2_pin_a /* &sdhc2_cd_pin */>;
+ /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
+};
+
+&tlmm {
+ blsp2_uart2_pins_active: blsp2-uart2-pins-active {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ function = "blsp_uart8";
+ drive-strength = <8>;
+ bias-disable;
};
- mdss@...00000 {
- status = "ok";
+ blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep {
+ pins = "gpio45", "gpio46", "gpio47", "gpio48";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
- mdp@...00000 {
- status = "ok";
+ bt_pins: bt-pins {
+ hostwake {
+ pins = "gpio75";
+ function = "gpio";
+ drive-strength = <16>;
+ input-enable;
};
- dsi@...22800 {
- status = "ok";
-
- vdda-supply = <&pma8084_l2>;
- vdd-supply = <&pma8084_l22>;
- vddio-supply = <&pma8084_l12>;
+ devwake {
+ pins = "gpio91";
+ function = "gpio";
+ drive-strength = <2>;
+ };
+ };
- #address-cells = <1>;
- #size-cells = <0>;
+ sdhc1_pin_a: sdhc1-pin-active {
+ clk {
+ pins = "sdc1_clk";
+ drive-strength = <4>;
+ bias-disable;
+ };
- ports {
- port@1 {
- endpoint {
- remote-endpoint = <&panel_in>;
- data-lanes = <0 1 2 3>;
- };
- };
- };
+ cmd-data {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <4>;
+ bias-pull-up;
+ };
+ };
- panel: panel@0 {
- reg = <0>;
- compatible = "samsung,s6e3fa2";
+ sdhc2_pin_a: sdhc2-pin-active {
+ clk-cmd-data {
+ pins = "gpio35", "gpio36", "gpio37", "gpio38",
+ "gpio39", "gpio40";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
- pinctrl-names = "default";
- pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
+ sdhc2_cd_pin: sdhc2-cd {
+ pins = "gpio62";
+ function = "gpio";
- iovdd-supply = <&pma8084_lvs4>;
- vddr-supply = <&vreg_panel>;
+ drive-strength = <2>;
+ bias-disable;
+ };
- reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
- te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+ sdhc3_pin_a: sdhc3-pin-active {
+ clk {
+ pins = "sdc2_clk";
+ drive-strength = <6>;
+ bias-disable;
+ };
- port {
- panel_in: endpoint {
- remote-endpoint = <&dsi0_out>;
- };
- };
- };
+ cmd-data {
+ pins = "sdc2_cmd", "sdc2_data";
+ drive-strength = <6>;
+ bias-pull-up;
};
+ };
- dsi-phy@...22a00 {
- status = "ok";
+ i2c2_pins: i2c2 {
+ mux {
+ pins = "gpio6", "gpio7";
+ function = "blsp_i2c2";
- vddio-supply = <&pma8084_l12>;
+ drive-strength = <2>;
+ bias-disable;
};
};
- remoteproc@...80000 {
- cx-supply = <&pma8084_s2>;
- mss-supply = <&pma8084_s6>;
- mx-supply = <&pma8084_s1>;
- pll-supply = <&pma8084_l12>;
+ i2c6_pins: i2c6 {
+ mux {
+ pins = "gpio29", "gpio30";
+ function = "blsp_i2c6";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
};
-};
-&spmi_bus {
- pma8084@0 {
- gpios@...0 {
- gpio_keys_pin_a: gpio-keys-active {
- pins = "gpio2", "gpio3", "gpio5";
- function = "normal";
+ i2c12_pins: i2c12 {
+ mux {
+ pins = "gpio87", "gpio88";
+ function = "blsp_i2c12";
- bias-pull-up;
- power-source = <PMA8084_GPIO_S4>;
- };
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
- touchkey_pin: touchkey-int-pin {
- pins = "gpio6";
- function = "normal";
- bias-disable;
- input-enable;
- power-source = <PMA8084_GPIO_S4>;
- };
+ i2c_touchkey_pins: i2c-touchkey {
+ mux {
+ pins = "gpio95", "gpio96";
+ function = "gpio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
- touch_pin: touchscreen-int-pin {
- pins = "gpio8";
- function = "normal";
- bias-disable;
- input-enable;
- power-source = <PMA8084_GPIO_S4>;
- };
+ i2c_led_gpioex_pins: i2c-led-gpioex {
+ mux {
+ pins = "gpio120", "gpio121";
+ function = "gpio";
+ input-enable;
+ bias-pull-down;
+ };
+ };
- panel_en_pin: panel-en-pin {
- pins = "gpio14";
- function = "normal";
- bias-pull-up;
- power-source = <PMA8084_GPIO_S4>;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- };
+ gpioex_pin: gpioex {
+ res {
+ pins = "gpio145";
+ function = "gpio";
- wlan_sleep_clk_pin: wlan-sleep-clk-pin {
- pins = "gpio16";
- function = "func2";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+ };
- output-high;
- power-source = <PMA8084_GPIO_S4>;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
- };
+ wifi_pin: wifi {
+ int {
+ pins = "gpio92";
+ function = "gpio";
- panel_rst_pin: panel-rst-pin {
- pins = "gpio17";
- function = "normal";
- bias-disable;
- power-source = <PMA8084_GPIO_S4>;
- qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
- };
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ panel_te_pin: panel {
+ te {
+ pins = "gpio12";
+ function = "mdp_vsync";
- fuelgauge_pin: fuelgauge-int-pin {
- pins = "gpio21";
- function = "normal";
- bias-disable;
- input-enable;
- power-source = <PMA8084_GPIO_S4>;
- };
+ drive-strength = <2>;
+ bias-disable;
};
};
};
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 6071f5eeba74..3370d48e9ad9 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -339,7 +339,7 @@ timer {
clock-frequency = <19200000>;
};
- adsp-pil {
+ remoteproc_adsp: adsp-pil {
compatible = "qcom,msm8974-adsp-pil";
interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
@@ -840,7 +840,7 @@ rng@...ff000 {
clock-names = "core";
};
- remoteproc@...80000 {
+ remoteproc_mss: remoteproc@...80000 {
compatible = "qcom,msm8974-mss-pil";
reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
reg-names = "qdsp6", "rmb";
--
2.35.2
Powered by blists - more mailing lists