| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220418121159.155302112@linuxfoundation.org>
Date: Mon, 18 Apr 2022 14:11:15 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Alan Stern <stern@...land.harvard.edu>
Subject: [PATCH 4.9 009/218] USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
From: Alan Stern <stern@...land.harvard.edu>
commit 1892bf90677abcad7f06e897e308f5c3e3618dd4 upstream.
The kernel test robot found a problem with the ene_ub6250 subdriver in
usb-storage: It uses structures containing bitfields to represent
hardware bits in its SD_STATUS, MS_STATUS, and SM_STATUS bytes. This
is not safe; it presumes a particular bit ordering and it assumes the
compiler will not insert padding, neither of which is guaranteed.
This patch fixes the problem by changing the structures to simple u8
values, with the bitfields replaced by bitmask constants.
CC: <stable@...r.kernel.org>
Signed-off-by: Alan Stern <stern@...land.harvard.edu>
Link: https://lore.kernel.org/r/YjOcbuU106UpJ/V8@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/usb/storage/ene_ub6250.c | 153 +++++++++++++++++++--------------------
1 file changed, 75 insertions(+), 78 deletions(-)
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -251,36 +251,33 @@ static struct us_unusual_dev ene_ub6250_
#define memstick_logaddr(logadr1, logadr0) ((((u16)(logadr1)) << 8) | (logadr0))
-struct SD_STATUS {
- u8 Insert:1;
- u8 Ready:1;
- u8 MediaChange:1;
- u8 IsMMC:1;
- u8 HiCapacity:1;
- u8 HiSpeed:1;
- u8 WtP:1;
- u8 Reserved:1;
-};
-
-struct MS_STATUS {
- u8 Insert:1;
- u8 Ready:1;
- u8 MediaChange:1;
- u8 IsMSPro:1;
- u8 IsMSPHG:1;
- u8 Reserved1:1;
- u8 WtP:1;
- u8 Reserved2:1;
-};
-
-struct SM_STATUS {
- u8 Insert:1;
- u8 Ready:1;
- u8 MediaChange:1;
- u8 Reserved:3;
- u8 WtP:1;
- u8 IsMS:1;
-};
+/* SD_STATUS bits */
+#define SD_Insert BIT(0)
+#define SD_Ready BIT(1)
+#define SD_MediaChange BIT(2)
+#define SD_IsMMC BIT(3)
+#define SD_HiCapacity BIT(4)
+#define SD_HiSpeed BIT(5)
+#define SD_WtP BIT(6)
+ /* Bit 7 reserved */
+
+/* MS_STATUS bits */
+#define MS_Insert BIT(0)
+#define MS_Ready BIT(1)
+#define MS_MediaChange BIT(2)
+#define MS_IsMSPro BIT(3)
+#define MS_IsMSPHG BIT(4)
+ /* Bit 5 reserved */
+#define MS_WtP BIT(6)
+ /* Bit 7 reserved */
+
+/* SM_STATUS bits */
+#define SM_Insert BIT(0)
+#define SM_Ready BIT(1)
+#define SM_MediaChange BIT(2)
+ /* Bits 3-5 reserved */
+#define SM_WtP BIT(6)
+#define SM_IsMS BIT(7)
struct ms_bootblock_cis {
u8 bCistplDEVICE[6]; /* 0 */
@@ -451,9 +448,9 @@ struct ene_ub6250_info {
u8 *bbuf;
/* for 6250 code */
- struct SD_STATUS SD_Status;
- struct MS_STATUS MS_Status;
- struct SM_STATUS SM_Status;
+ u8 SD_Status;
+ u8 MS_Status;
+ u8 SM_Status;
/* ----- SD Control Data ---------------- */
/*SD_REGISTER SD_Regs; */
@@ -588,7 +585,7 @@ static int sd_scsi_test_unit_ready(struc
{
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
- if (info->SD_Status.Insert && info->SD_Status.Ready)
+ if ((info->SD_Status & SD_Insert) && (info->SD_Status & SD_Ready))
return USB_STOR_TRANSPORT_GOOD;
else {
ene_sd_init(us);
@@ -620,7 +617,7 @@ static int sd_scsi_mode_sense(struct us_
0x0b, 0x00, 0x80, 0x08, 0x00, 0x00,
0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
- if (info->SD_Status.WtP)
+ if (info->SD_Status & SD_WtP)
usb_stor_set_xfer_buf(mediaWP, 12, srb);
else
usb_stor_set_xfer_buf(mediaNoWP, 12, srb);
@@ -639,9 +636,9 @@ static int sd_scsi_read_capacity(struct
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
usb_stor_dbg(us, "sd_scsi_read_capacity\n");
- if (info->SD_Status.HiCapacity) {
+ if (info->SD_Status & SD_HiCapacity) {
bl_len = 0x200;
- if (info->SD_Status.IsMMC)
+ if (info->SD_Status & SD_IsMMC)
bl_num = info->HC_C_SIZE-1;
else
bl_num = (info->HC_C_SIZE + 1) * 1024 - 1;
@@ -691,7 +688,7 @@ static int sd_scsi_read(struct us_data *
return USB_STOR_TRANSPORT_ERROR;
}
- if (info->SD_Status.HiCapacity)
+ if (info->SD_Status & SD_HiCapacity)
bnByte = bn;
/* set up the command wrapper */
@@ -731,7 +728,7 @@ static int sd_scsi_write(struct us_data
return USB_STOR_TRANSPORT_ERROR;
}
- if (info->SD_Status.HiCapacity)
+ if (info->SD_Status & SD_HiCapacity)
bnByte = bn;
/* set up the command wrapper */
@@ -1447,7 +1444,7 @@ static int ms_scsi_test_unit_ready(struc
struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
/* pr_info("MS_SCSI_Test_Unit_Ready\n"); */
- if (info->MS_Status.Insert && info->MS_Status.Ready) {
+ if ((info->MS_Status & MS_Insert) && (info->MS_Status & MS_Ready)) {
return USB_STOR_TRANSPORT_GOOD;
} else {
ene_ms_init(us);
@@ -1480,7 +1477,7 @@ static int ms_scsi_mode_sense(struct us_
0x0b, 0x00, 0x80, 0x08, 0x00, 0x00,
0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };
- if (info->MS_Status.WtP)
+ if (info->MS_Status & MS_WtP)
usb_stor_set_xfer_buf(mediaWP, 12, srb);
else
usb_stor_set_xfer_buf(mediaNoWP, 12, srb);
@@ -1499,7 +1496,7 @@ static int ms_scsi_read_capacity(struct
usb_stor_dbg(us, "ms_scsi_read_capacity\n");
bl_len = 0x200;
- if (info->MS_Status.IsMSPro)
+ if (info->MS_Status & MS_IsMSPro)
bl_num = info->MSP_TotalBlock - 1;
else
bl_num = info->MS_Lib.NumberOfLogBlock * info->MS_Lib.blockSize * 2 - 1;
@@ -1654,7 +1651,7 @@ static int ms_scsi_read(struct us_data *
if (bn > info->bl_num)
return USB_STOR_TRANSPORT_ERROR;
- if (info->MS_Status.IsMSPro) {
+ if (info->MS_Status & MS_IsMSPro) {
result = ene_load_bincode(us, MSP_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
usb_stor_dbg(us, "Load MPS RW pattern Fail !!\n");
@@ -1755,7 +1752,7 @@ static int ms_scsi_write(struct us_data
if (bn > info->bl_num)
return USB_STOR_TRANSPORT_ERROR;
- if (info->MS_Status.IsMSPro) {
+ if (info->MS_Status & MS_IsMSPro) {
result = ene_load_bincode(us, MSP_RW_PATTERN);
if (result != USB_STOR_XFER_GOOD) {
pr_info("Load MSP RW pattern Fail !!\n");
@@ -1863,12 +1860,12 @@ static int ene_get_card_status(struct us
tmpreg = (u16) reg4b;
reg4b = *(u32 *)(&buf[0x14]);
- if (info->SD_Status.HiCapacity && !info->SD_Status.IsMMC)
+ if ((info->SD_Status & SD_HiCapacity) && !(info->SD_Status & SD_IsMMC))
info->HC_C_SIZE = (reg4b >> 8) & 0x3fffff;
info->SD_C_SIZE = ((tmpreg & 0x03) << 10) | (u16)(reg4b >> 22);
info->SD_C_SIZE_MULT = (u8)(reg4b >> 7) & 0x07;
- if (info->SD_Status.HiCapacity && info->SD_Status.IsMMC)
+ if ((info->SD_Status & SD_HiCapacity) && (info->SD_Status & SD_IsMMC))
info->HC_C_SIZE = *(u32 *)(&buf[0x100]);
if (info->SD_READ_BL_LEN > SD_BLOCK_LEN) {
@@ -2080,6 +2077,7 @@ static int ene_ms_init(struct us_data *u
u16 MSP_BlockSize, MSP_UserAreaBlocks;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
u8 *bbuf = info->bbuf;
+ unsigned int s;
printk(KERN_INFO "transport --- ENE_MSInit\n");
@@ -2104,15 +2102,16 @@ static int ene_ms_init(struct us_data *u
return USB_STOR_TRANSPORT_ERROR;
}
/* the same part to test ENE */
- info->MS_Status = *(struct MS_STATUS *) bbuf;
+ info->MS_Status = bbuf[0];
- if (info->MS_Status.Insert && info->MS_Status.Ready) {
- printk(KERN_INFO "Insert = %x\n", info->MS_Status.Insert);
- printk(KERN_INFO "Ready = %x\n", info->MS_Status.Ready);
- printk(KERN_INFO "IsMSPro = %x\n", info->MS_Status.IsMSPro);
- printk(KERN_INFO "IsMSPHG = %x\n", info->MS_Status.IsMSPHG);
- printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP);
- if (info->MS_Status.IsMSPro) {
+ s = info->MS_Status;
+ if ((s & MS_Insert) && (s & MS_Ready)) {
+ printk(KERN_INFO "Insert = %x\n", !!(s & MS_Insert));
+ printk(KERN_INFO "Ready = %x\n", !!(s & MS_Ready));
+ printk(KERN_INFO "IsMSPro = %x\n", !!(s & MS_IsMSPro));
+ printk(KERN_INFO "IsMSPHG = %x\n", !!(s & MS_IsMSPHG));
+ printk(KERN_INFO "WtP= %x\n", !!(s & MS_WtP));
+ if (s & MS_IsMSPro) {
MSP_BlockSize = (bbuf[6] << 8) | bbuf[7];
MSP_UserAreaBlocks = (bbuf[10] << 8) | bbuf[11];
info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks;
@@ -2173,17 +2172,17 @@ static int ene_sd_init(struct us_data *u
return USB_STOR_TRANSPORT_ERROR;
}
- info->SD_Status = *(struct SD_STATUS *) bbuf;
- if (info->SD_Status.Insert && info->SD_Status.Ready) {
- struct SD_STATUS *s = &info->SD_Status;
+ info->SD_Status = bbuf[0];
+ if ((info->SD_Status & SD_Insert) && (info->SD_Status & SD_Ready)) {
+ unsigned int s = info->SD_Status;
ene_get_card_status(us, bbuf);
- usb_stor_dbg(us, "Insert = %x\n", s->Insert);
- usb_stor_dbg(us, "Ready = %x\n", s->Ready);
- usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC);
- usb_stor_dbg(us, "HiCapacity = %x\n", s->HiCapacity);
- usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed);
- usb_stor_dbg(us, "WtP = %x\n", s->WtP);
+ usb_stor_dbg(us, "Insert = %x\n", !!(s & SD_Insert));
+ usb_stor_dbg(us, "Ready = %x\n", !!(s & SD_Ready));
+ usb_stor_dbg(us, "IsMMC = %x\n", !!(s & SD_IsMMC));
+ usb_stor_dbg(us, "HiCapacity = %x\n", !!(s & SD_HiCapacity));
+ usb_stor_dbg(us, "HiSpeed = %x\n", !!(s & SD_HiSpeed));
+ usb_stor_dbg(us, "WtP = %x\n", !!(s & SD_WtP));
} else {
usb_stor_dbg(us, "SD Card Not Ready --- %x\n", bbuf[0]);
return USB_STOR_TRANSPORT_ERROR;
@@ -2205,14 +2204,14 @@ static int ene_init(struct us_data *us)
misc_reg03 = bbuf[0];
if (misc_reg03 & 0x01) {
- if (!info->SD_Status.Ready) {
+ if (!(info->SD_Status & SD_Ready)) {
result = ene_sd_init(us);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
}
}
if (misc_reg03 & 0x02) {
- if (!info->MS_Status.Ready) {
+ if (!(info->MS_Status & MS_Ready)) {
result = ene_ms_init(us);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@@ -2302,14 +2301,14 @@ static int ene_transport(struct scsi_cmn
/*US_DEBUG(usb_stor_show_command(us, srb)); */
scsi_set_resid(srb, 0);
- if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready)))
+ if (unlikely(!(info->SD_Status & SD_Ready) || (info->MS_Status & MS_Ready)))
result = ene_init(us);
if (result == USB_STOR_XFER_GOOD) {
result = USB_STOR_TRANSPORT_ERROR;
- if (info->SD_Status.Ready)
+ if (info->SD_Status & SD_Ready)
result = sd_scsi_irp(us, srb);
- if (info->MS_Status.Ready)
+ if (info->MS_Status & MS_Ready)
result = ms_scsi_irp(us, srb);
}
return result;
@@ -2373,7 +2372,6 @@ static int ene_ub6250_probe(struct usb_i
static int ene_ub6250_resume(struct usb_interface *iface)
{
- u8 tmp = 0;
struct us_data *us = usb_get_intfdata(iface);
struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
@@ -2385,17 +2383,16 @@ static int ene_ub6250_resume(struct usb_
mutex_unlock(&us->dev_mutex);
info->Power_IsResum = true;
- /*info->SD_Status.Ready = 0; */
- info->SD_Status = *(struct SD_STATUS *)&tmp;
- info->MS_Status = *(struct MS_STATUS *)&tmp;
- info->SM_Status = *(struct SM_STATUS *)&tmp;
+ /* info->SD_Status &= ~SD_Ready; */
+ info->SD_Status = 0;
+ info->MS_Status = 0;
+ info->SM_Status = 0;
return 0;
}
static int ene_ub6250_reset_resume(struct usb_interface *iface)
{
- u8 tmp = 0;
struct us_data *us = usb_get_intfdata(iface);
struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
@@ -2407,10 +2404,10 @@ static int ene_ub6250_reset_resume(struc
* the device
*/
info->Power_IsResum = true;
- /*info->SD_Status.Ready = 0; */
- info->SD_Status = *(struct SD_STATUS *)&tmp;
- info->MS_Status = *(struct MS_STATUS *)&tmp;
- info->SM_Status = *(struct SM_STATUS *)&tmp;
+ /* info->SD_Status &= ~SD_Ready; */
+ info->SD_Status = 0;
+ info->MS_Status = 0;
+ info->SM_Status = 0;
return 0;
}
Powered by blists - more mailing lists