[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <Yl2EYIdMdz7Lnk26@google.com>
Date: Mon, 18 Apr 2022 08:31:44 -0700
From: Matthias Kaehlcke <mka@...omium.org>
To: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
Cc: agross@...nel.org, bjorn.andersson@...aro.org, robh+dt@...nel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, quic_rohkumar@...cinc.com,
srinivas.kandagatla@...aro.org, dianders@...omium.org,
swboyd@...omium.org, judyhsiao@...omium.org,
Venkata Prasad Potturu <quic_potturu@...cinc.com>
Subject: Re: [PATCH v7 4/4] arm64: dts: qcom: sc7280: Add dt nodes for sound
card
On Mon, Apr 18, 2022 at 07:39:44PM +0530, Srinivasa Rao Mandadapu wrote:
>
> On 4/14/2022 2:53 AM, Matthias Kaehlcke wrote:
> Thanks for your time Matthias!!!
> > On Wed, Apr 13, 2022 at 08:51:17PM +0530, Srinivasa Rao Mandadapu wrote:
> > > Add dt nodes for sound card support, which is using WCD938x headset
> > > playback, capture, I2S speaker playback and DMICs via VA macro.
> > >
> > > Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
> > > Co-developed-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
> > > Signed-off-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
> > > ---
> > > arch/arm64/boot/dts/qcom/sc7280-crd.dts | 23 ++++++++
> > > arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 93 ++++++++++++++++++++++++++++++++
> > > 2 files changed, 116 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> > > index b944366..1e16854 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> > > +++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
> > You need to refresh your tree, this file has been renamed to
> > sc7280-crd-r3.dts. That DT is for the CRD <= 2.x, newer versions
> > use sc7280-herobrine-crd.dts.
> Okay. will update accordingly.
> >
> > > @@ -90,6 +90,29 @@ ap_ts_pen_1v8: &i2c13 {
> > > us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
> > > };
> > > +&sound {
> > > + audio-routing =
> > > + "IN1_HPHL", "HPHL_OUT",
> > > + "IN2_HPHR", "HPHR_OUT",
> > > + "AMIC1", "MIC BIAS1",
> > > + "AMIC2", "MIC BIAS2",
> > > + "VA DMIC0", "MIC BIAS1",
> > > + "VA DMIC1", "MIC BIAS1",
> > > + "VA DMIC2", "MIC BIAS3",
> > > + "VA DMIC3", "MIC BIAS3",
> > > + "TX SWR_ADC0", "ADC1_OUTPUT",
> > > + "TX SWR_ADC1", "ADC2_OUTPUT",
> > > + "TX SWR_ADC2", "ADC3_OUTPUT",
> > > + "TX SWR_DMIC0", "DMIC1_OUTPUT",
> > > + "TX SWR_DMIC1", "DMIC2_OUTPUT",
> > > + "TX SWR_DMIC2", "DMIC3_OUTPUT",
> > > + "TX SWR_DMIC3", "DMIC4_OUTPUT",
> > > + "TX SWR_DMIC4", "DMIC5_OUTPUT",
> > > + "TX SWR_DMIC5", "DMIC6_OUTPUT",
> > > + "TX SWR_DMIC6", "DMIC7_OUTPUT",
> > > + "TX SWR_DMIC7", "DMIC8_OUTPUT";
> > > +};
> > > +
> > > &tlmm {
> > > tp_int_odl: tp-int-odl {
> > > pins = "gpio7";
> > > diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> > > index cf62d06..a7c884a 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> > > @@ -84,6 +84,99 @@
> > > pinctrl-names = "default";
> > > pinctrl-0 = <&nvme_pwren>;
> > > };
> > > +
> > > + sound: sound {
> > > + compatible = "google,sc7280-herobrine";
> > > + model = "sc7280-wcd938x-max98360a-1mic";
> > > +
> > > + audio-routing =
> > > + "IN1_HPHL", "HPHL_OUT",
> > > + "IN2_HPHR", "HPHR_OUT",
> > > + "AMIC1", "MIC BIAS1",
> > > + "AMIC2", "MIC BIAS2",
> > > + "VA DMIC0", "MIC BIAS3",
> > > + "VA DMIC1", "MIC BIAS3",
> > > + "VA DMIC2", "MIC BIAS1",
> > > + "VA DMIC3", "MIC BIAS1",
> > > + "TX SWR_ADC0", "ADC1_OUTPUT",
> > > + "TX SWR_ADC1", "ADC2_OUTPUT",
> > > + "TX SWR_ADC2", "ADC3_OUTPUT",
> > > + "TX SWR_DMIC0", "DMIC1_OUTPUT",
> > > + "TX SWR_DMIC1", "DMIC2_OUTPUT",
> > > + "TX SWR_DMIC2", "DMIC3_OUTPUT",
> > > + "TX SWR_DMIC3", "DMIC4_OUTPUT",
> > > + "TX SWR_DMIC4", "DMIC5_OUTPUT",
> > > + "TX SWR_DMIC5", "DMIC6_OUTPUT",
> > > + "TX SWR_DMIC6", "DMIC7_OUTPUT",
> > > + "TX SWR_DMIC7", "DMIC8_OUTPUT";
> > > +
> > > + qcom,msm-mbhc-hphl-swh = <1>;
> > > + qcom,msm-mbhc-gnd-swh = <1>;
> > > +
> > > + #address-cells = <1>;
> > > + #size-cells = <0>;
> > > + #sound-dai-cells = <0>;
> > > +
> > > + dai-link@1 {
> > > + link-name = "MAX98360A";
> > > + reg = <MI2S_SECONDARY>;
> > Dumb question: is this value actually used? A quick glance through
> > qcom_snd_parse_of() suggests it isn't. And the CPU DAI id is already
> > specified in the 'sound-dai' property below.
> >
> > In a quick test I replaced the corresponding 'reg' values in
> > sc7180-trogdor.dtsi with 'random' values and audio playback on
> > my coachz (sc7180-trogdor-coachz-r3.dts) still works ...
>
> Yes. agree that it's not being used. But i am not sure of general syntax
> followed.
>
> for now will delete it.
The binding requires it though. I think the correct thing would be to remove it
from the binding and from all device trees currently using it. But that might be
beyond the scope of this series.
Maybe a two step approach would be the best: add 'reg' in this series, get it
landed and then send another series that changes the binding and deletes all
'reg' entries (and adjusts the 'address' in the node name).
I don't think the CPU DAI id should be in the node name either. It isn't even
necessarily a unique identifier if I understand correctly. A SoC could have
multiple IP blocks with audio buses, each with their own enumeration of DAIs.
I suggest to just enumerate the nodes (and 'reg' while it's there) linearly
starting with 0, or maybe even change the node name in the binding (in a
second step) to dai-link-N.
Powered by blists - more mailing lists