[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1650304226-11080-3-git-send-email-quic_jhugo@quicinc.com>
Date: Mon, 18 Apr 2022 11:50:26 -0600
From: Jeffrey Hugo <quic_jhugo@...cinc.com>
To: <mani@...nel.org>, <quic_hemantk@...cinc.com>,
<quic_bbhatt@...cinc.com>
CC: <mhi@...ts.linux.dev>, <linux-arm-msm@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Bhaumik Bhatt <bbhatt@...eaurora.org>,
Jeffrey Hugo <quic_jhugo@...cinc.com>
Subject: [PATCH v4 2/2] bus: mhi: host: Optimize and update MMIO register write method
From: Bhaumik Bhatt <bbhatt@...eaurora.org>
As of now, MMIO writes done after ready state transition use the
mhi_write_reg_field() API even though the whole register is being
written in most cases. Optimize this process by using mhi_write_reg()
API instead for those writes and use the mhi_write_reg_field()
API for MHI config registers only.
Signed-off-by: Bhaumik Bhatt <bbhatt@...eaurora.org>
Reviewed-by: Hemant Kumar <hemantk@...eaurora.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@...cinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Signed-off-by: Jeffrey Hugo <quic_jhugo@...cinc.com>
---
drivers/bus/mhi/host/init.c | 62 ++++++++++++++++++++++-----------------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c
index 3842611..cbb86b2 100644
--- a/drivers/bus/mhi/host/init.c
+++ b/drivers/bus/mhi/host/init.c
@@ -439,74 +439,65 @@ int mhi_init_mmio(struct mhi_controller *mhi_cntrl)
struct device *dev = &mhi_cntrl->mhi_dev->dev;
struct {
u32 offset;
- u32 mask;
u32 val;
} reg_info[] = {
{
- CCABAP_HIGHER, U32_MAX,
+ CCABAP_HIGHER,
upper_32_bits(mhi_cntrl->mhi_ctxt->chan_ctxt_addr),
},
{
- CCABAP_LOWER, U32_MAX,
+ CCABAP_LOWER,
lower_32_bits(mhi_cntrl->mhi_ctxt->chan_ctxt_addr),
},
{
- ECABAP_HIGHER, U32_MAX,
+ ECABAP_HIGHER,
upper_32_bits(mhi_cntrl->mhi_ctxt->er_ctxt_addr),
},
{
- ECABAP_LOWER, U32_MAX,
+ ECABAP_LOWER,
lower_32_bits(mhi_cntrl->mhi_ctxt->er_ctxt_addr),
},
{
- CRCBAP_HIGHER, U32_MAX,
+ CRCBAP_HIGHER,
upper_32_bits(mhi_cntrl->mhi_ctxt->cmd_ctxt_addr),
},
{
- CRCBAP_LOWER, U32_MAX,
+ CRCBAP_LOWER,
lower_32_bits(mhi_cntrl->mhi_ctxt->cmd_ctxt_addr),
},
{
- MHICFG, MHICFG_NER_MASK,
- mhi_cntrl->total_ev_rings,
- },
- {
- MHICFG, MHICFG_NHWER_MASK,
- mhi_cntrl->hw_ev_rings,
- },
- {
- MHICTRLBASE_HIGHER, U32_MAX,
+ MHICTRLBASE_HIGHER,
upper_32_bits(mhi_cntrl->iova_start),
},
{
- MHICTRLBASE_LOWER, U32_MAX,
+ MHICTRLBASE_LOWER,
lower_32_bits(mhi_cntrl->iova_start),
},
{
- MHIDATABASE_HIGHER, U32_MAX,
+ MHIDATABASE_HIGHER,
upper_32_bits(mhi_cntrl->iova_start),
},
{
- MHIDATABASE_LOWER, U32_MAX,
+ MHIDATABASE_LOWER,
lower_32_bits(mhi_cntrl->iova_start),
},
{
- MHICTRLLIMIT_HIGHER, U32_MAX,
+ MHICTRLLIMIT_HIGHER,
upper_32_bits(mhi_cntrl->iova_stop),
},
{
- MHICTRLLIMIT_LOWER, U32_MAX,
+ MHICTRLLIMIT_LOWER,
lower_32_bits(mhi_cntrl->iova_stop),
},
{
- MHIDATALIMIT_HIGHER, U32_MAX,
+ MHIDATALIMIT_HIGHER,
upper_32_bits(mhi_cntrl->iova_stop),
},
{
- MHIDATALIMIT_LOWER, U32_MAX,
+ MHIDATALIMIT_LOWER,
lower_32_bits(mhi_cntrl->iova_stop),
},
- { 0, 0, 0 }
+ {0, 0}
};
dev_dbg(dev, "Initializing MHI registers\n");
@@ -547,13 +538,22 @@ int mhi_init_mmio(struct mhi_controller *mhi_cntrl)
mhi_cntrl->mhi_cmd[PRIMARY_CMD_RING].ring.db_addr = base + CRDB_LOWER;
/* Write to MMIO registers */
- for (i = 0; reg_info[i].offset; i++) {
- ret = mhi_write_reg_field(mhi_cntrl, base, reg_info[i].offset,
- reg_info[i].mask, reg_info[i].val);
- if (ret) {
- dev_err(dev, "Unable to write to MMIO registers\n");
- return ret;
- }
+ for (i = 0; reg_info[i].offset; i++)
+ mhi_write_reg(mhi_cntrl, base, reg_info[i].offset,
+ reg_info[i].val);
+
+ ret = mhi_write_reg_field(mhi_cntrl, base, MHICFG, MHICFG_NER_MASK,
+ mhi_cntrl->total_ev_rings);
+ if (ret) {
+ dev_err(dev, "Unable to write MHICFG register\n");
+ return ret;
+ }
+
+ ret = mhi_write_reg_field(mhi_cntrl, base, MHICFG, MHICFG_NHWER_MASK,
+ mhi_cntrl->hw_ev_rings);
+ if (ret) {
+ dev_err(dev, "Unable to write MHICFG register\n");
+ return ret;
}
return 0;
--
2.7.4
Powered by blists - more mailing lists