| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <e4c150a8-6e68-d06b-c695-a428ccba14c8@collabora.com>
Date: Mon, 18 Apr 2022 22:57:43 +0500
From: Muhammad Usama Anjum <usama.anjum@...labora.com>
To: Benson Leung <bleung@...omium.org>,
Hans de Goede <hdegoede@...hat.com>
Cc: usama.anjum@...labora.com,
Collabora Kernel ML <kernel@...labora.com>,
groeck@...omium.org, bleung@...omium.org, dtor@...omium.org,
Len Brown <lenb@...nel.org>, gwendal@...omium.org,
vbendeb@...omium.org, andy@...radead.org,
Ayman Bagabas <ayman.bagabas@...il.com>,
Benjamin Tissoires <benjamin.tissoires@...hat.com>,
Blaž Hrastnik <blaz@...n.io>,
Darren Hart <dvhart@...radead.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jeremy Soller <jeremy@...tem76.com>,
Mattias Jacobsson <2pi@....nu>,
Mauro Carvalho Chehab <mchehab+samsung@...nel.org>,
Rajat Jain <rajatja@...gle.com>,
Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>,
platform-driver-x86@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-acpi@...r.kernel.org,
"Rafael J . Wysocki" <rafael.j.wysocki@...el.com>,
Enric Balletbo i Serra <eballetbo@...il.com>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Mark Gross <markgross@...nel.org>
Subject: Re: [PATCH v8] platform: x86: Add ChromeOS ACPI device driver
Hi Benson,
We are very near to getting this patch in. I can see that you are
maintaining Chrome Platform support. This driver is in
drivers/platform/x86/chromeos_acpi.c. Can you maintain this driver as
well? I'll add you to the maintainers.
Thank you,
Usama
On 4/15/22 10:08 PM, Muhammad Usama Anjum wrote:
> From: Enric Balletbo i Serra <enric.balletbo@...labora.com>
>
> The x86 Chromebooks have ChromeOS ACPI device. This driver attaches to
> the ChromeOS ACPI device and exports the values reported by ACPI in a
> sysfs directory. This data isn't present in ACPI tables when read
> through ACPI tools, hence a driver is needed to do it. The driver gets
> data from firmware using ACPI component of the kernel. The ACPI values
> are presented in string form (numbers as decimal values) or binary
> blobs, and can be accessed as the contents of the appropriate read only
> files in the standard ACPI device's sysfs directory tree. This data is
> consumed by the ChromeOS user space.
>
> Cc: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
> Cc: Dmitry Torokhov <dmitry.torokhov@...il.com>
> Cc: Hans de Goede <hdegoede@...hat.com>
> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
> Signed-off-by: Muhammad Usama Anjum <usama.anjum@...labora.com>
> ---
> Changes in v8:
> - Change struct platform_driver name from chromeos_acpi_driver to
> chromeos_acpi_device_driver
>
> Changes in v7:
> - Rename acpi_chromeos Kconfig option to chromeos_acpi
> - Change this acpi driver to platform driver
> - Minor cosmetic changes
>
> There were the following concerns on v4 which have been delt with in
> v5/v6:
> - Remove BINF.{0,1,4} from sysfs as they are reserved and not used
> anymore
> - Reword the description of MECK
> - Change function name from chromeos_acpi_alloc_name() to
> chromeos_acpi_gen_file_name()
> - Remove local variable obj in chromeos_acpi_add_method()
> - Replace usage of dev_info() to dev_dbg()
> - Improve the description of the patch
> - Add the firmware interface document which serves as primary
> documentation and garantees that this interface will not change
> - GGL0001 is valid PNP ID of the Google. PNP ID can be used with the
> ACPI devices. Consensus was developed on it in discussion of v4.
>
> Changes in v6:
> - Correct authorship and path email's From
> - Add changelog between v4 and v5 in detail
> - Add copywrite year 2022
> - Improve the description and add concerns from V4 which have been fixed
>
> Changes in v5:
> - Improve the description of the patch
> - Document firmware interface
> - Update sysfs interface documentation
> - Remove binf{0,1,4} as they have been deprecated
> - Update some cleanup logic in case of error
> - Remove freeing of chromeos_acpi.root explicitely in
> chromeos_acpi_device_remove() as it'll be automatically freed by
> chromeos_acpi_remove_groups()
> - If sysfs_create_groups() fails in chromeos_acpi_process_mlst(),
> cleanup all groups
> - Cosmetic changes
>
> Changes in v4:
> https://lore.kernel.org/lkml/20200413134611.478441-1-enric.balletbo@collabora.com/t/
> - Add COMPILE_TEST to increase build coverage.
> - Add sysfs ABI documentation.
> - Rebased on top of 5.7-rc1 and solve conflicts.
> - Cc ACPI maintainers.
>
> Changes in v3:
> - Use attribute groups instead of adding files "by hand".
> - Do not use "raw" kobject to create directories.
> - Do not abuse of the platform_device interface. Remove it.
>
> Changes in v2:
> - Note that this version is a total rework, with those major changes:
> - Use lists to track dinamically allocated attributes and groups.
> - Use sysfs binary attributes to store the ACPI contents.
> - Remove all the functionalities except the one that creates the sysfs files.
> ---
> .../ABI/testing/sysfs-driver-chromeos-acpi | 126 +++++
> .../acpi/chromeos-acpi-device.rst | 363 +++++++++++++
> Documentation/firmware-guide/acpi/index.rst | 1 +
> drivers/platform/x86/Kconfig | 11 +
> drivers/platform/x86/Makefile | 3 +
> drivers/platform/x86/chromeos_acpi.c | 513 ++++++++++++++++++
> 6 files changed, 1017 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-driver-chromeos-acpi
> create mode 100644 Documentation/firmware-guide/acpi/chromeos-acpi-device.rst
> create mode 100644 drivers/platform/x86/chromeos_acpi.c
>
> diff --git a/Documentation/ABI/testing/sysfs-driver-chromeos-acpi b/Documentation/ABI/testing/sysfs-driver-chromeos-acpi
> new file mode 100644
> index 0000000000000..b74fbca62f4c3
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-driver-chromeos-acpi
> @@ -0,0 +1,126 @@
> +What: /sys/bus/platform/devices/GGL0001:00/BINF.2
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This file shows information about the current boot of
> + the active EC firmware.
> + * 0 - Read only (recovery) firmware.
> + * 1 - Rewritable firmware.
> +
> +What: /sys/bus/platform/devices/GGL0001:00/BINF.3
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This file shows information about the current boot of
> + the active main firmware type.
> + * 0 - Recovery.
> + * 1 - Normal.
> + * 2 - Developer.
> + * 3 - Netboot (factory installation only).
> +
> +What: /sys/bus/platform/devices/GGL0001:00/CHSW
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This file shows the switch position for the Chrome OS specific
> + hardware switches.
> + * 0 - No changes.
> + * 2 - Recovery button was pressed when firmware booted.
> + * 4 - Recovery button was pressed when EC firmware booted.
> + * 32 - Developer switch was enabled when firmware booted.
> + * 512 - Firmware write protect was disabled when firmware
> + booted.
> +
> +What: /sys/bus/platform/devices/GGL0001:00/FMAP
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This file shows the physical memory address of the start of
> + the main processor firmware flashmap.
> +
> +What: /sys/bus/platform/devices/GGL0001:00/FRID
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This file shows the firmware version for the read-only portion
> + of the main processor firmware.
> +
> +What: /sys/bus/platform/devices/GGL0001:00/FWID
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This file shows the firmware version for the rewritable portion
> + of the main processor firmware.
> +
> +What: /sys/bus/platform/devices/GGL0001:00/GPIO.X/GPIO.0
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This file shows the type of the GPIO signal for the Chrome OS
> + specific GPIO assignments.
> + * 1 - Recovery button.
> + * 2 - Developer mode switch.
> + * 3 - Firmware write protect switch.
> + * 256 to 511 - Debug header GPIO 0 to GPIO 255.
> +
> +What: /sys/bus/platform/devices/GGL0001:00/GPIO.X/GPIO.1
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This file shows the signal attributes of the GPIO signal.
> + * 0 - Signal is active low.
> + * 1 - Signal is active high.
> +
> +What: /sys/bus/platform/devices/GGL0001:00/GPIO.X/GPIO.2
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This file shows the GPIO number on the specified GPIO
> + controller.
> +
> +What: /sys/bus/platform/devices/GGL0001:00/GPIO.X/GPIO.3
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This file shows the name of the GPIO controller.
> +
> +What: /sys/bus/platform/devices/GGL0001:00/HWID
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This file shows the hardware ID for the Chromebook.
> +
> +What: /sys/bus/platform/devices/GGL0001:00/MECK
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This binary file returns the SHA-1 or SHA-256 hash that is
> + read out of the Management Engine extend registers during
> + boot. The hash is exported vi ACPI so the OS can verify that
> + the Management Engine firmware has not changed. If Management
> + Engine is not present, or if the firmware was unable to read the
> + extend registers, this buffer size can be zero.
> +
> +What: /sys/bus/platform/devices/GGL0001:00/VBNV.0
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This file shows the offset in CMOS bank 0 of the verified boot
> + non-volatile storage block, counting from the first writable
> + CMOS byte (that is, 'offset = 0' is the byte following the 14
> + bytes of clock data).
> +
> +What: /sys/bus/platform/devices/GGL0001:00/VBNV.1
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This file shows the size in bytes of the verified boot
> + non-volatile storage block.
> +
> +What: /sys/bus/platform/devices/GGL0001:00/VDAT
> +Date: April 2022
> +KernelVersion: 5.19
> +Description:
> + This binary file returns the verified boot data block shared
> + between the firmware verification step and the kernel
> + verification step.
> diff --git a/Documentation/firmware-guide/acpi/chromeos-acpi-device.rst b/Documentation/firmware-guide/acpi/chromeos-acpi-device.rst
> new file mode 100644
> index 0000000000000..ef3cc980bad54
> --- /dev/null
> +++ b/Documentation/firmware-guide/acpi/chromeos-acpi-device.rst
> @@ -0,0 +1,363 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +=====================
> +Chrome OS ACPI Device
> +=====================
> +
> +Hardware functionality specific to Chrome OS is exposed through a Chrome OS ACPI device.
> +The plug and play ID of a Chrome OS ACPI device is GGL0001. GGL is valid PNP ID of Google.
> +PNP ID can be used with the ACPI devices accourding to the guidelines. The following ACPI
> +objects are supported:
> +
> +.. flat-table:: Supported ACPI Objects
> + :widths: 1 2
> + :header-rows: 1
> +
> + * - Object
> + - Description
> +
> + * - CHSW
> + - Chrome OS switch positions
> +
> + * - HWID
> + - Chrome OS hardware ID
> +
> + * - FWID
> + - Chrome OS firmware version
> +
> + * - FRID
> + - Chrome OS read-only firmware version
> +
> + * - BINF
> + - Chrome OS boot information
> +
> + * - GPIO
> + - Chrome OS GPIO assignments
> +
> + * - VBNV
> + - Chrome OS NVRAM locations
> +
> + * - VDTA
> + - Chrome OS verified boot data
> +
> + * - FMAP
> + - Chrome OS flashmap base address
> +
> + * - MLST
> + - Chrome OS method list
> +
> +CHSW (Chrome OS switch positions)
> +=================================
> +This control method returns the switch positions for Chrome OS specific hardware switches.
> +
> +Arguments:
> +----------
> +None
> +
> +Result code:
> +------------
> +An integer containing the switch positions as bitfields:
> +
> +.. flat-table::
> + :widths: 1 2
> +
> + * - 0x00000002
> + - Recovery button was pressed when x86 firmware booted.
> +
> + * - 0x00000004
> + - Recovery button was pressed when EC firmware booted. (required if EC EEPROM is
> + rewritable; otherwise optional)
> +
> + * - 0x00000020
> + - Developer switch was enabled when x86 firmware booted.
> +
> + * - 0x00000200
> + - Firmware write protect was disabled when x86 firmware booted. (required if
> + firmware write protect is controlled through x86 BIOS; otherwise optional)
> +
> +All other bits are reserved and should be set to 0.
> +
> +HWID (Chrome OS hardware ID)
> +============================
> +This control method returns the hardware ID for the Chromebook.
> +
> +Arguments:
> +----------
> +None
> +
> +Result code:
> +------------
> +A null-terminated ASCII string containing the hardware ID from the Model-Specific Data area of
> +EEPROM.
> +
> +Note that the hardware ID can be up to 256 characters long, including the terminating null.
> +
> +FWID (Chrome OS firmware version)
> +=================================
> +This control method returns the firmware version for the rewritable portion of the main
> +processor firmware.
> +
> +Arguments:
> +----------
> +None
> +
> +Result code:
> +------------
> +A null-terminated ASCII string containing the complete firmware version for the rewritable
> +portion of the main processor firmware.
> +
> +FRID (Chrome OS read-only firmware version)
> +===========================================
> +This control method returns the firmware version for the read-only portion of the main
> +processor firmware.
> +
> +Arguments:
> +----------
> +None
> +
> +Result code:
> +------------
> +A null-terminated ASCII string containing the complete firmware version for the read-only
> +(bootstrap + recovery ) portion of the main processor firmware.
> +
> +BINF (Chrome OS boot information)
> +=================================
> +This control method returns information about the current boot.
> +
> +Arguments:
> +----------
> +None
> +
> +Result code:
> +------------
> +
> +.. code-block::
> +
> + Package {
> + Reserved1
> + Reserved2
> + Active EC Firmware
> + Active Main Firmware Type
> + Reserved5
> + }
> +
> +.. flat-table::
> + :widths: 1 1 2
> + :header-rows: 1
> +
> + * - Field
> + - Format
> + - Description
> +
> + * - Reserved1
> + - DWORD
> + - Set to 256 (0x100). This indicates this field is no longer used.
> +
> + * - Reserved2
> + - DWORD
> + - Set to 256 (0x100). This indicates this field is no longer used.
> +
> + * - Active EC firmware
> + - DWORD
> + - The EC firmware which was used during boot.
> +
> + - 0 - Read-only (recovery) firmware
> + - 1 - Rewritable firmware.
> +
> + Set to 0 if EC firmware is always read-only.
> +
> + * - Active Main Firmware Type
> + - DWORD
> + - The main firmware type which was used during boot.
> +
> + - 0 - Recovery
> + - 1 - Normal
> + - 2 - Developer
> + - 3 - netboot (factory installation only)
> +
> + Other values are reserved.
> +
> + * - Reserved5
> + - DWORD
> + - Set to 256 (0x100). This indicates this field is no longer used.
> +
> +GPIO (Chrome OS GPIO assignments)
> +=================================
> +This control method returns information about Chrome OS specific GPIO assignments for
> +Chrome OS hardware, so the kernel can directly control that hardware.
> +
> +Arguments:
> +----------
> +None
> +
> +Result code:
> +------------
> +.. code-block::
> +
> + Package {
> + Package {
> + // First GPIO assignment
> + Signal Type //DWORD
> + Attributes //DWORD
> + Controller Offset //DWORD
> + Controller Name //ASCIIZ
> + },
> + ...
> + Package {
> + // Last GPIO assignment
> + Signal Type //DWORD
> + Attributes //DWORD
> + Controller Offset //DWORD
> + Controller Name //ASCIIZ
> + }
> + }
> +
> +Where ASCIIZ means a null-terminated ASCII string.
> +
> +.. flat-table::
> + :widths: 1 1 2
> + :header-rows: 1
> +
> + * - Field
> + - Format
> + - Description
> +
> + * - Signal Type
> + - DWORD
> + - Type of GPIO signal
> +
> + - 0x00000001 - Recovery button
> + - 0x00000002 - Developer mode switch
> + - 0x00000003 - Firmware write protect switch
> + - 0x00000100 - Debug header GPIO 0
> + - ...
> + - 0x000001FF - Debug header GPIO 255
> +
> + Other values are reserved.
> +
> + * - Attributes
> + - DWORD
> + - Signal attributes as bitfields:
> +
> + - 0x00000001 - Signal is active-high (for button, a GPIO value
> + of 1 means the button is pressed; for switches, a GPIO value
> + of 1 means the switch is enabled). If this bit is 0, the signal
> + is active low. Set to 0 for debug header GPIOs.
> +
> + * - Controller Offset
> + - DWORD
> + - GPIO number on the specified controller.
> +
> + * - Controller Name
> + - ASCIIZ
> + - Name of the controller for the GPIO.
> + Currently supported names:
> + "NM10" - Intel NM10 chip
> +
> +VBNV (Chrome OS NVRAM locations)
> +================================
> +This control method returns information about the NVRAM (CMOS) locations used to
> +communicate with the BIOS.
> +
> +Arguments:
> +----------
> +None
> +
> +Result code:
> +------------
> +.. code-block::
> +
> + Package {
> + NV Storage Block Offset //DWORD
> + NV Storage Block Size //DWORD
> + }
> +
> +.. flat-table::
> + :widths: 1 1 2
> + :header-rows: 1
> +
> + * - Field
> + - Format
> + - Description
> +
> + * - NV Storage Block Offset
> + - DWORD
> + - Offset in CMOS bank 0 of the verified boot non-volatile storage block, counting from
> + the first writable CMOS byte (that is, offset=0 is the byte following the 14 bytes of
> + clock data).
> +
> + * - NV Storage Block Size
> + - DWORD
> + - Size in bytes of the verified boot non-volatile storage block.
> +
> +FMAP (Chrome OS flashmap address)
> +=================================
> +This control method returns the physical memory address of the start of the main processor
> +firmware flashmap.
> +
> +Arguments:
> +----------
> +None
> +
> +NoneResult code:
> +----------------
> +A DWORD containing the physical memory address of the start of the main processor firmware
> +flashmap.
> +
> +VDTA (Chrome OS verified boot data)
> +===================================
> +This control method returns the verified boot data block shared between the firmware
> +verification step and the kernel verification step.
> +
> +Arguments:
> +----------
> +None
> +
> +Result code:
> +------------
> +A buffer containing the verified boot data block.
> +
> +MECK (Management Engine Checksum)
> +=================================
> +This control method returns the SHA-1 or SHA-256 hash that is read out of the Management
> +Engine extend registers during boot. The hash is exported via ACPI so the OS can verify that
> +the ME firmware has not changed. If Management Engine is not present, or if the firmware was
> +unable to read the extend registers, this buffer can be zero.
> +
> +Arguments:
> +----------
> +None
> +
> +Result code:
> +------------
> +A buffer containing the ME hash.
> +
> +MLST (Chrome OS method list)
> +============================
> +This control method returns a list of the other control methods supported by the Chrome OS
> +hardware device.
> +
> +Arguments:
> +----------
> +None
> +
> +Result code:
> +------------
> +A package containing a list of null-terminated ASCII strings, one for each control method
> +supported by the Chrome OS hardware device, not including the MLST method itself.
> +For this version of the specification, the result is:
> +
> +.. code-block::
> +
> + Package {
> + "CHSW",
> + "FWID",
> + "HWID",
> + "FRID",
> + "BINF",
> + "GPIO",
> + "VBNV",
> + "FMAP",
> + "VDTA",
> + "MECK"
> + }
> diff --git a/Documentation/firmware-guide/acpi/index.rst b/Documentation/firmware-guide/acpi/index.rst
> index b053b0c3d6969..b6a42f4ffe032 100644
> --- a/Documentation/firmware-guide/acpi/index.rst
> +++ b/Documentation/firmware-guide/acpi/index.rst
> @@ -29,3 +29,4 @@ ACPI Support
> non-d0-probe
> extcon-intel-int3496
> intel-pmc-mux
> + chromeos-acpi-device
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 5d9dd70e4e0f5..53ddfe6f99b06 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -322,6 +322,17 @@ config ASUS_NB_WMI
> If you have an ACPI-WMI compatible Asus Notebook, say Y or M
> here.
>
> +config CHROMEOS_ACPI
> + tristate "ChromeOS specific ACPI extensions"
> + depends on ACPI || COMPILE_TEST
> + help
> + This driver provides the firmware interface for the services
> + exported through the ChromeOS interfaces when using ChromeOS
> + ACPI firmware.
> +
> + If you have an ACPI-compatible Chromebook, say Y or M
> + here.
> +
> config ASUS_TF103C_DOCK
> tristate "Asus TF103C 2-in-1 keyboard dock"
> depends on ACPI
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index fe4d4c8970efa..ae68f4fa9a6c4 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -44,6 +44,9 @@ obj-$(CONFIG_EEEPC_WMI) += eeepc-wmi.o
> # Cisco/Meraki
> obj-$(CONFIG_MERAKI_MX100) += meraki-mx100.o
>
> +# Chrome
> +obj-$(CONFIG_CHROMEOS_ACPI) += chromeos_acpi.o
> +
> # Dell
> obj-$(CONFIG_X86_PLATFORM_DRIVERS_DELL) += dell/
>
> diff --git a/drivers/platform/x86/chromeos_acpi.c b/drivers/platform/x86/chromeos_acpi.c
> new file mode 100644
> index 0000000000000..de86119a446b8
> --- /dev/null
> +++ b/drivers/platform/x86/chromeos_acpi.c
> @@ -0,0 +1,513 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * ChromeOS specific ACPI extensions
> + *
> + * Copyright 2011 Google, Inc.
> + * Copyright 2020-2022 Google LLC
> + *
> + * This file is a rework and part of the code is ported from chromeos-3.18
> + * kernel and was originally written by Vadim Bendebury <vbendeb@...omium.org>.
> + *
> + * This driver attaches to the ChromeOS ACPI device and then exports the
> + * values reported by the ACPI in a sysfs directory. All values are
> + * presented in the string form (numbers as decimal values) and can be
> + * accessed as the contents of the appropriate read only files in the
> + * sysfs directory tree.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/platform_device.h>
> +#include <linux/kernel.h>
> +#include <linux/list.h>
> +#include <linux/module.h>
> +
> +/*
> + * ACPI method name for MLST; the response for this method is a package of
> + * strings listing the methods which should be reflected in sysfs.
> + */
> +#define MLST "MLST"
> +
> +/*
> + * The default list of methods the ChromeOS ACPI device is supposed to export,
> + * if the MLST method is not present or is poorly formed. The MLST method
> + * itself is included, to aid in debugging.
> + */
> +static char *chromeos_acpi_default_methods[] = {
> + "CHSW", "HWID", "BINF", "GPIO", "CHNV", "FWID", "FRID", MLST
> +};
> +
> +/*
> + * Representation of a single sysfs attribute. In addition to the standard
> + * bin_attribute structure has a list of these structures (to keep track for
> + * de-allocation when removing the driver) and a pointer to the actual
> + * attribute name and value, reported when accessing the appropriate sysfs
> + * file.
> + */
> +struct chromeos_acpi_attribute {
> + struct bin_attribute bin_attr;
> + struct list_head list;
> + char *name;
> + char *data;
> +};
> +
> +/*
> + * Representation of a sysfs attribute group (a sub directory in the device's
> + * sysfs directory). In addition to the standard structure has lists to allow
> + * to keep track of the allocated structures.
> + */
> +struct chromeos_acpi_attribute_group {
> + struct attribute_group group;
> + struct list_head attribs;
> + struct list_head list;
> + char *name;
> +};
> +
> +/*
> + * This is the main structure, we use it to store data and adds links pointing
> + * at lists of allocated attributes and attribute groups.
> + */
> +struct chromeos_acpi_dev {
> + struct chromeos_acpi_attribute_group *root;
> + const struct attribute_group **dev_groups;
> + struct list_head groups;
> + unsigned int num_groups;
> + unsigned int num_attrs;
> +};
> +
> +static struct chromeos_acpi_dev chromeos_acpi;
> +
> +static ssize_t chromeos_acpi_read_bin_attribute(struct file *filp,
> + struct kobject *kobj,
> + struct bin_attribute *bin_attr,
> + char *buffer, loff_t pos,
> + size_t count)
> +{
> + struct chromeos_acpi_attribute *info = bin_attr->private;
> +
> + return memory_read_from_buffer(buffer, count, &pos, info->data,
> + info->bin_attr.size);
> +}
> +
> +static char *chromeos_acpi_gen_file_name(char *name, int count, int index)
> +{
> + char *str;
> +
> + if (count == 1)
> + str = kstrdup(name, GFP_KERNEL);
> + else
> + str = kasprintf(GFP_KERNEL, "%s.%d", name, index);
> +
> + return str;
> +}
> +
> +static int
> +chromeos_acpi_add_attr(struct chromeos_acpi_attribute_group *aag,
> + union acpi_object *element, char *name,
> + int count, int index)
> +{
> + struct chromeos_acpi_attribute *info;
> + char buffer[24]; /* enough to store a u64 and null character */
> + int length;
> + int ret;
> +
> + /* Files BINF.{0,1,4} are historical and no longer used. */
> + if (!strcmp(name, "BINF") && (index == 0 || index == 1 || index == 4))
> + return 0;
> +
> + info = kzalloc(sizeof(*info), GFP_KERNEL);
> + if (!info)
> + return -ENOMEM;
> +
> + info->name = chromeos_acpi_gen_file_name(name, count, index);
> + if (!info->name) {
> + ret = -ENOMEM;
> + goto free_attribute;
> + }
> + sysfs_bin_attr_init(&info->bin_attr);
> + info->bin_attr.attr.name = info->name;
> + info->bin_attr.attr.mode = 0444;
> +
> + switch (element->type) {
> + case ACPI_TYPE_BUFFER:
> + length = element->buffer.length;
> + info->data = kmemdup(element->buffer.pointer,
> + length, GFP_KERNEL);
> + break;
> + case ACPI_TYPE_INTEGER:
> + length = snprintf(buffer, sizeof(buffer), "%d",
> + (int)element->integer.value);
> + info->data = kmemdup(buffer, length, GFP_KERNEL);
> + break;
> + case ACPI_TYPE_STRING:
> + length = element->string.length + 1;
> + info->data = kstrdup(element->string.pointer, GFP_KERNEL);
> + break;
> + default:
> + ret = -EINVAL;
> + goto free_attr_name;
> + }
> +
> + if (!info->data) {
> + ret = -ENOMEM;
> + goto free_attr_name;
> + }
> +
> + info->bin_attr.size = length;
> + info->bin_attr.read = chromeos_acpi_read_bin_attribute;
> + info->bin_attr.private = info;
> +
> + INIT_LIST_HEAD(&info->list);
> +
> + list_add(&info->list, &aag->attribs);
> + return 0;
> +
> +free_attr_name:
> + kfree(info->name);
> +free_attribute:
> + kfree(info);
> + return ret;
> +}
> +
> +static void
> +chromeos_acpi_remove_attribs(struct chromeos_acpi_attribute_group *aag)
> +{
> + struct chromeos_acpi_attribute *attr, *tmp_attr;
> +
> + list_for_each_entry_safe(attr, tmp_attr, &aag->attribs, list) {
> + kfree(attr->name);
> + kfree(attr->data);
> + kfree(attr);
> + }
> +}
> +
> +static int
> +chromeos_acpi_add_attribs_to_group(struct chromeos_acpi_attribute_group *aag,
> + unsigned int num_attrs)
> +{
> + struct chromeos_acpi_attribute *attr;
> + int count = 0;
> +
> + aag->group.bin_attrs = kcalloc(num_attrs + 1,
> + sizeof(*aag->group.bin_attrs),
> + GFP_KERNEL);
> + if (!aag->group.bin_attrs)
> + return -ENOMEM;
> +
> + list_for_each_entry(attr, &aag->attribs, list) {
> + aag->group.bin_attrs[count] = &attr->bin_attr;
> + count++;
> + }
> +
> + chromeos_acpi.num_groups++;
> + list_add(&aag->list, &chromeos_acpi.groups);
> +
> + return 0;
> +}
> +
> +/**
> + * chromeos_acpi_add_group() - Create a sysfs group including attributes
> + * representing a nested ACPI package
> + *
> + * @obj: Package contents as returned by ACPI
> + * @name: Name of the group
> + * @num_attrs: Number of attributes of this package
> + * @index: Index number of this particular group
> + *
> + * The created group is called @name in case there is a single instance, or
> + * @name.@...ex otherwise.
> + *
> + * All group and attribute storage allocations are included in the lists for
> + * tracking of allocated memory.
> + *
> + * Return: 0 on success, negative errno on failure.
> + */
> +static int chromeos_acpi_add_group(union acpi_object *obj, char *name,
> + int num_attrs, int index)
> +{
> + struct chromeos_acpi_attribute_group *aag;
> + union acpi_object *element;
> + int i, count, ret;
> +
> + aag = kzalloc(sizeof(*aag), GFP_KERNEL);
> + if (!aag)
> + return -ENOMEM;
> + aag->name = chromeos_acpi_gen_file_name(name, num_attrs, index);
> + if (!aag->name) {
> + ret = -ENOMEM;
> + goto free_group;
> + }
> +
> + INIT_LIST_HEAD(&aag->attribs);
> + INIT_LIST_HEAD(&aag->list);
> +
> + count = obj->package.count;
> + element = obj->package.elements;
> + for (i = 0; i < count; i++, element++) {
> + ret = chromeos_acpi_add_attr(aag, element, name, count, i);
> + if (ret)
> + goto free_group_attr;
> + }
> +
> + aag->group.name = aag->name;
> +
> + ret = chromeos_acpi_add_attribs_to_group(aag, count);
> + if (ret)
> + goto free_group_attr;
> +
> + return 0;
> +
> +free_group_attr:
> + chromeos_acpi_remove_attribs(aag);
> + kfree(aag->name);
> +free_group:
> + kfree(aag);
> + return ret;
> +}
> +
> +static void chromeos_acpi_remove_groups(void)
> +{
> + struct chromeos_acpi_attribute_group *aag, *tmp_aag;
> +
> + list_for_each_entry_safe(aag, tmp_aag, &chromeos_acpi.groups, list) {
> + chromeos_acpi_remove_attribs(aag);
> + kfree(aag->group.bin_attrs);
> + kfree(aag->name);
> + kfree(aag);
> + }
> +}
> +
> +/**
> + * chromeos_acpi_handle_package() - Create sysfs group including attributes
> + * representing an ACPI package
> + *
> + * @pdev: Platform device
> + * @obj: Package contents as returned by ACPI
> + * @name: Name of the group
> + *
> + * Scalar objects included in the package get sysfs attributes created for
> + * them. Nested packages are passed to a function creating a sysfs group per
> + * package.
> + *
> + * Return: 0 on success, negative errno on failure.
> + */
> +static int chromeos_acpi_handle_package(struct platform_device *pdev,
> + union acpi_object *obj, char *name)
> +{
> + struct device *dev = &pdev->dev;
> + int count = obj->package.count;
> + union acpi_object *element;
> + int i, ret;
> +
> + element = obj->package.elements;
> + for (i = 0; i < count; i++, element++) {
> + if (element->type == ACPI_TYPE_BUFFER ||
> + element->type == ACPI_TYPE_STRING ||
> + element->type == ACPI_TYPE_INTEGER) {
> + /* Create a single attribute in the root directory */
> + ret = chromeos_acpi_add_attr(chromeos_acpi.root,
> + element, name,
> + count, i);
> + if (ret) {
> + dev_err(dev, "error adding attributes (%d)\n",
> + ret);
> + return ret;
> + }
> + chromeos_acpi.num_attrs++;
> + } else if (element->type == ACPI_TYPE_PACKAGE) {
> + /* Create a group of attributes */
> + ret = chromeos_acpi_add_group(element, name, count, i);
> + if (ret) {
> + dev_err(dev, "error adding a group (%d)\n",
> + ret);
> + return ret;
> + }
> + } else {
> + if (ret) {
> + dev_err(dev, "error on element type (%d)\n",
> + ret);
> + return -EINVAL;
> + }
> + }
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * chromeos_acpi_add_method() - Evaluate an ACPI method and create sysfs
> + * attributes
> + *
> + * @pdev: Platform device
> + * @name: Name of the method to evaluate
> + *
> + * Return: 0 on success, non-zero on failure
> + */
> +static int chromeos_acpi_add_method(struct platform_device *pdev, char *name)
> +{
> + struct device *dev = &pdev->dev;
> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> + acpi_status status;
> + int ret = 0;
> +
> + status = acpi_evaluate_object(ACPI_COMPANION(&pdev->dev)->handle, name, NULL, &output);
> + if (ACPI_FAILURE(status)) {
> + dev_err(dev, "failed to retrieve %s (%d)\n", name, status);
> + return status;
> + }
> +
> + if (((union acpi_object *)output.pointer)->type == ACPI_TYPE_PACKAGE)
> + ret = chromeos_acpi_handle_package(pdev, output.pointer, name);
> +
> + kfree(output.pointer);
> + return ret;
> +}
> +
> +/**
> + * chromeos_acpi_process_mlst() - Evaluate the MLST method and add methods
> + * listed in the response
> + *
> + * @pdev: Platform device
> + *
> + * Returns: 0 if successful, non-zero if error.
> + */
> +static int chromeos_acpi_process_mlst(struct platform_device *pdev)
> +{
> + struct chromeos_acpi_attribute_group *aag;
> + char name[ACPI_NAMESEG_SIZE + 1];
> + union acpi_object *element, *obj;
> + struct device *dev = &pdev->dev;
> + struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> + acpi_status status;
> + int ret = 0;
> + int size;
> + int i;
> +
> + status = acpi_evaluate_object(ACPI_COMPANION(&pdev->dev)->handle, MLST, NULL,
> + &output);
> + if (ACPI_FAILURE(status))
> + return status;
> +
> + obj = output.pointer;
> + if (obj->type != ACPI_TYPE_PACKAGE) {
> + ret = -EINVAL;
> + goto free_acpi_buffer;
> + }
> +
> + element = obj->package.elements;
> + for (i = 0; i < obj->package.count; i++, element++) {
> + if (element->type == ACPI_TYPE_STRING) {
> + size = min(element->string.length + 1,
> + (u32)ACPI_NAMESEG_SIZE + 1);
> + strscpy(name, element->string.pointer, size);
> + ret = chromeos_acpi_add_method(pdev, name);
> + if (ret) {
> + chromeos_acpi_remove_groups();
> + break;
> + }
> + }
> + }
> +
> + /* Add root attributes to the main group */
> + ret = chromeos_acpi_add_attribs_to_group(chromeos_acpi.root,
> + chromeos_acpi.num_attrs);
> + if (ret)
> + goto free_acpi_buffer;
> +
> + chromeos_acpi.dev_groups = kcalloc(chromeos_acpi.num_groups + 1,
> + sizeof(struct attribute_group),
> + GFP_KERNEL);
> +
> + i = 0;
> + list_for_each_entry(aag, &chromeos_acpi.groups, list) {
> + chromeos_acpi.dev_groups[i] = &aag->group;
> + i++;
> + }
> +
> + ret = sysfs_create_groups(&dev->kobj, chromeos_acpi.dev_groups);
> + if (ret) {
> + kfree(chromeos_acpi.dev_groups);
> +
> + /* Remove allocated chromeos acpi groups and attributes */
> + chromeos_acpi_remove_groups();
> + }
> +
> +free_acpi_buffer:
> + kfree(output.pointer);
> + return ret;
> +}
> +
> +static int chromeos_acpi_device_probe(struct platform_device *pdev)
> +{
> + struct chromeos_acpi_attribute_group *aag;
> + struct device *dev = &pdev->dev;
> + int i, ret;
> +
> + aag = kzalloc(sizeof(*aag), GFP_KERNEL);
> + if (!aag)
> + return -ENOMEM;
> +
> + INIT_LIST_HEAD(&aag->attribs);
> + INIT_LIST_HEAD(&aag->list);
> + INIT_LIST_HEAD(&chromeos_acpi.groups);
> +
> + chromeos_acpi.root = aag;
> +
> + /*
> + * Attempt to add methods by querying the device's MLST method
> + * for the list of methods.
> + */
> + if (!chromeos_acpi_process_mlst(pdev))
> + return 0;
> +
> + dev_dbg(dev, "falling back to default list of methods\n");
> +
> + for (i = 0; i < ARRAY_SIZE(chromeos_acpi_default_methods); i++) {
> + ret = chromeos_acpi_add_method(pdev,
> + chromeos_acpi_default_methods[i]);
> + if (ret) {
> + dev_err(dev, "failed to add default methods (%d)\n",
> + ret);
> + goto free_group_root;
> + }
> + }
> +
> + return 0;
> +
> +free_group_root:
> + kfree(chromeos_acpi.root);
> + return ret;
> +}
> +
> +static int chromeos_acpi_device_remove(struct platform_device *pdev)
> +{
> + /* Remove sysfs groups */
> + sysfs_remove_groups(&pdev->dev.kobj, chromeos_acpi.dev_groups);
> + kfree(chromeos_acpi.dev_groups);
> +
> + /* Remove allocated chromeos acpi groups and attributes */
> + chromeos_acpi_remove_groups();
> +
> + return 0;
> +}
> +
> +/* GGL is valid PNP ID of Google. PNP ID can be used with the ACPI devices. */
> +static const struct acpi_device_id chromeos_device_ids[] = {
> + { "GGL0001", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(acpi, chromeos_device_ids);
> +
> +static struct platform_driver chromeos_acpi_device_driver = {
> + .probe = chromeos_acpi_device_probe,
> + .remove = chromeos_acpi_device_remove,
> + .driver = {
> + .name = "chromeos-acpi",
> + .acpi_match_table = ACPI_PTR(chromeos_device_ids)
> + }
> +};
> +
> +module_platform_driver(chromeos_acpi_device_driver);
> +
> +MODULE_AUTHOR("Enric Balletbo i Serra <enric.balletbo@...labora.com>");
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("ChromeOS specific ACPI extensions");
--
Muhammad Usama Anjum
Powered by blists - more mailing lists