| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220418121210.118991567@linuxfoundation.org>
Date: Mon, 18 Apr 2022 14:11:24 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Takashi Iwai <tiwai@...e.de>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.17 115/219] ALSA: usb-audio: Limit max buffer and period sizes per time
From: Takashi Iwai <tiwai@...e.de>
[ Upstream commit 24d0c9f0e7de95fe3e3e0067cbea1cd5d413244b ]
In the previous fix, we increased the max buffer bytes from 1MB to 4MB
so that we can use bigger buffers for the modern HiFi devices with
higher rates, more channels and wider formats. OTOH, extending this
has a concern that too big buffer is allowed for the lower rates, less
channels and narrower formats; when an application tries to allocate
as big buffer as possible, it'll lead to unexpectedly too huge size.
Also, we had a problem about the inconsistent max buffer and period
bytes for the implicit feedback mode when both streams have different
channels. This was fixed by the (relatively complex) patch to reduce
the max buffer and period bytes accordingly.
This is an alternative fix for those, a patch to kill two birds with
one stone (*): instead of increasing the max buffer bytes blindly and
applying the reduction per channels, we simply use the hw constraints
for the buffer and period "time". Meanwhile the max buffer and period
bytes are set unlimited instead.
Since the inconsistency of buffer (and period) bytes comes from the
difference of the channels in the tied streams, as long as we care
only about the buffer (and period) time, it doesn't matter; the buffer
time is same for different channels, although we still allow higher
buffer size. Similarly, this will allow more buffer bytes for HiFi
devices while it also keeps the reasonable size for the legacy
devices, too.
As of this patch, the max period and buffer time are set to 1 and 2
seconds, which should be large enough for all possible use cases.
(*) No animals were harmed in the making of this patch.
Fixes: 98c27add5d96 ("ALSA: usb-audio: Cap upper limits of buffer/period bytes for implicit fb")
Fixes: fee2ec8cceb3 ("ALSA: usb-audio: Increase max buffer size")
Link: https://lore.kernel.org/r/20220412130740.18933-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@...e.de>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
sound/usb/pcm.c | 101 +++++++-----------------------------------------
1 file changed, 14 insertions(+), 87 deletions(-)
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 37ee6df8b15a..6d699065e81a 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -659,9 +659,6 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream)
#define hwc_debug(fmt, args...) do { } while(0)
#endif
-#define MAX_BUFFER_BYTES (4 * 1024 * 1024)
-#define MAX_PERIOD_BYTES (512 * 1024)
-
static const struct snd_pcm_hardware snd_usb_hardware =
{
.info = SNDRV_PCM_INFO_MMAP |
@@ -672,9 +669,9 @@ static const struct snd_pcm_hardware snd_usb_hardware =
SNDRV_PCM_INFO_PAUSE,
.channels_min = 1,
.channels_max = 256,
- .buffer_bytes_max = MAX_BUFFER_BYTES,
+ .buffer_bytes_max = INT_MAX, /* limited by BUFFER_TIME later */
.period_bytes_min = 64,
- .period_bytes_max = MAX_PERIOD_BYTES,
+ .period_bytes_max = INT_MAX, /* limited by PERIOD_TIME later */
.periods_min = 2,
.periods_max = 1024,
};
@@ -974,78 +971,6 @@ static int hw_rule_periods_implicit_fb(struct snd_pcm_hw_params *params,
ep->cur_buffer_periods);
}
-/* get the adjusted max buffer (or period) bytes that can fit with the
- * paired format for implicit fb
- */
-static unsigned int
-get_adjusted_max_bytes(struct snd_usb_substream *subs,
- struct snd_usb_substream *pair,
- struct snd_pcm_hw_params *params,
- unsigned int max_bytes,
- bool reverse_map)
-{
- const struct audioformat *fp, *pp;
- unsigned int rmax = 0, r;
-
- list_for_each_entry(fp, &subs->fmt_list, list) {
- if (!fp->implicit_fb)
- continue;
- if (!reverse_map &&
- !hw_check_valid_format(subs, params, fp))
- continue;
- list_for_each_entry(pp, &pair->fmt_list, list) {
- if (pp->iface != fp->sync_iface ||
- pp->altsetting != fp->sync_altsetting ||
- pp->ep_idx != fp->sync_ep_idx)
- continue;
- if (reverse_map &&
- !hw_check_valid_format(pair, params, pp))
- break;
- if (!reverse_map && pp->channels > fp->channels)
- r = max_bytes * fp->channels / pp->channels;
- else if (reverse_map && pp->channels < fp->channels)
- r = max_bytes * pp->channels / fp->channels;
- else
- r = max_bytes;
- rmax = max(rmax, r);
- break;
- }
- }
- return rmax;
-}
-
-/* Reduce the period or buffer bytes depending on the paired substream;
- * when a paired configuration for implicit fb has a higher number of channels,
- * we need to reduce the max size accordingly, otherwise it may become unusable
- */
-static int hw_rule_bytes_implicit_fb(struct snd_pcm_hw_params *params,
- struct snd_pcm_hw_rule *rule)
-{
- struct snd_usb_substream *subs = rule->private;
- struct snd_usb_substream *pair;
- struct snd_interval *it;
- unsigned int max_bytes;
- unsigned int rmax;
-
- pair = &subs->stream->substream[!subs->direction];
- if (!pair->ep_num)
- return 0;
-
- if (rule->var == SNDRV_PCM_HW_PARAM_PERIOD_BYTES)
- max_bytes = MAX_PERIOD_BYTES;
- else
- max_bytes = MAX_BUFFER_BYTES;
-
- rmax = get_adjusted_max_bytes(subs, pair, params, max_bytes, false);
- if (!rmax)
- rmax = get_adjusted_max_bytes(pair, subs, params, max_bytes, true);
- if (!rmax)
- return 0;
-
- it = hw_param_interval(params, rule->var);
- return apply_hw_params_minmax(it, 0, rmax);
-}
-
/*
* set up the runtime hardware information.
*/
@@ -1139,6 +1064,18 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre
return err;
}
+ /* set max period and buffer sizes for 1 and 2 seconds, respectively */
+ err = snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_PERIOD_TIME,
+ 0, 1000000);
+ if (err < 0)
+ return err;
+ err = snd_pcm_hw_constraint_minmax(runtime,
+ SNDRV_PCM_HW_PARAM_BUFFER_TIME,
+ 0, 2000000);
+ if (err < 0)
+ return err;
+
/* additional hw constraints for implicit fb */
err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_FORMAT,
hw_rule_format_implicit_fb, subs,
@@ -1160,16 +1097,6 @@ static int setup_hw_info(struct snd_pcm_runtime *runtime, struct snd_usb_substre
SNDRV_PCM_HW_PARAM_PERIODS, -1);
if (err < 0)
return err;
- err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
- hw_rule_bytes_implicit_fb, subs,
- SNDRV_PCM_HW_PARAM_BUFFER_BYTES, -1);
- if (err < 0)
- return err;
- err = snd_pcm_hw_rule_add(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
- hw_rule_bytes_implicit_fb, subs,
- SNDRV_PCM_HW_PARAM_PERIOD_BYTES, -1);
- if (err < 0)
- return err;
list_for_each_entry(fp, &subs->fmt_list, list) {
if (fp->implicit_fb) {
--
2.35.1
Powered by blists - more mailing lists