[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220419164105.14bf82cf@bootlin.com>
Date: Tue, 19 Apr 2022 16:41:05 +0200
From: Herve Codina <herve.codina@...tlin.com>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: Marek Vasut <marek.vasut+renesas@...il.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Magnus Damm <magnus.damm@...il.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Krzysztof Wilczyński <kw@...ux.com>,
Rob Herring <robh@...nel.org>,
linux-pci <linux-pci@...r.kernel.org>,
Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Sergey Shtylyov <s.shtylyov@....ru>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Clement Leger <clement.leger@...tlin.com>,
Miquel Raynal <miquel.raynal@...tlin.com>
Subject: Re: [PATCH v2 2/8] dt-bindings: PCI: renesas-pci-usb: Convert
bindings to json-schema
Hi Geert,
On Thu, 14 Apr 2022 10:28:47 +0200
Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
> Hi Hervé,
>
> On Thu, Apr 14, 2022 at 9:40 AM Herve Codina <herve.codina@...tlin.com> wrote:
> > Convert Renesas PCI bridge bindings documentation to json-schema.
> > Also name it 'renesas,pci-usb' as it is specifically used to
> > connect the PCI USB controllers to AHB bus.
> >
> > Signed-off-by: Herve Codina <herve.codina@...tlin.com>
>
> Thanks a lot for tackling this DT binding file!
>
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/renesas,pci-usb.yaml
> > @@ -0,0 +1,134 @@
> > +# SPDX-License-Identifier: GPL-2.0
>
> scripts/checkpatch.pl says:
> WARNING: DT binding documents should be licensed (GPL-2.0-only OR BSD-2-Clause)
Right, changed to "GPL-2.0-only OR BSD-2-Clause"
>
> > + reg:
> > + description: |
> > + A list of physical regions to access the device. The first is
> > + the operational registers for the OHCI/EHCI controllers and the
> > + second is for the bridge configuration and control registers.
> > + minItems: 2
> > + maxItems: 2
>
> reg:
> items:
> - description: Operational registers for the OHCI/EHCI controllers.
> - description: Bridge configuration and control registers.
Ok, changed.
>
> > +
> > + interrupts:
> > + description: Interrupt for the device.
>
> maxItems: 1
>
> The description is not needed.
Ok, changed.
>
> > +
> > + interrupt-map:
> > + description: |
> > + Standard property used to define the mapping of the PCI interrupts
> > + to the GIC interrupts.
> > +
> > + interrupt-map-mask:
> > + description:
> > + Standard property that helps to define the interrupt mapping.
> > +
> > + clocks:
> > + description: The reference to the device clock.
>
> maxItems: 1
>
> The description is not needed.
Ok, changed
>
> Missing "resets" and "power-domains" properties.
>
> Missing description of the child nodes.
"resets", "power-domains" dans child nodes added
>
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - interrupt-map
> > + - interrupt-map-mask
> > + - clocks
>
> Missing "resets" and "power-domains".
Added
>
> > + - bus-range
> > + - "#address-cells"
> > + - "#size-cells"
> > + - "#interrupt-cells"
> > +
> > +unevaluatedProperties: false
>
> Why doesn't "make dtbs_check" complain about the presence of
> e.g. "resets" in the actual DTS files?
>
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > + #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
> > +
> > + bus {
> > + #address-cells = <2>;
> > + #size-cells = <2>;
>
> I think you should drop this (and the corresponding high addresses
> below).
>
Ok
> > +
> > + pci0: pci@...90000 {
> > + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2";
> > + device_type = "pci";
> > + clocks = <&cpg CPG_MOD 703>;
> > + reg = <0 0xee090000 0 0xc00>,
> > + <0 0xee080000 0 0x1100>;
> > + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
>
> power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
> resets = <&cpg 703>;
Ok
>
> > + status = "disabled";
> > +
> > + bus-range = <0 0>;
> > + #address-cells = <3>;
> > + #size-cells = <2>;
> > + #interrupt-cells = <1>;
> > + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>;
> > + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>;
> > + interrupt-map-mask = <0xf800 0 0 0x7>;
> > + interrupt-map = <0x0000 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> > + <0x0800 0 0 1 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
> > + <0x1000 0 0 2 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > + usb@1,0 {
> > + reg = <0x800 0 0 0 0>;
> > + phys = <&usb0 0>;
> > + phy-names = "usb";
> > + };
> > +
>
> ERROR: trailing whitespace
> #249: FILE: Documentation/devicetree/bindings/pci/renesas,pci-usb.yaml:127:
> + $
Ok
>
> > + usb@2,0 {
> > + reg = <0x1000 0 0 0 0>;
> > + phys = <&usb0 0>;
> > + phy-names = "usb";
> > + };
> > + };
> > + };
>
> Gr{oetje,eeting}s,
>
> Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
> -- Linus Torvalds
Thanks for the review,
Hervé
--
Hervé Codina, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists