| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220419163810.2118169-22-arnd@kernel.org>
Date: Tue, 19 Apr 2022 18:37:43 +0200
From: Arnd Bergmann <arnd@...nel.org>
To: robert.jarzmik@...e.fr, linux-arm-kernel@...ts.infradead.org
Cc: Arnd Bergmann <arnd@...db.de>, Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Marek Vasut <marek.vasut@...il.com>,
Philipp Zabel <philipp.zabel@...il.com>,
Lubomir Rintel <lkundrak@...sk>,
Paul Parsons <lost.distance@...oo.com>,
Tomas Cech <sleep_walker@...e.com>,
Sergey Lapin <slapin@...fans.org>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
"Rafael J. Wysocki" <rafael@...nel.org>,
Viresh Kumar <viresh.kumar@...aro.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Ulf Hansson <ulf.hansson@...aro.org>,
Dominik Brodowski <linux@...inikbrodowski.net>,
Helge Deller <deller@....de>, Mark Brown <broonie@...nel.org>,
Linus Walleij <linus.walleij@...aro.org>,
linux-kernel@...r.kernel.org, linux-mips@...r.kernel.org,
linux-ide@...r.kernel.org, linux-clk@...r.kernel.org,
linux-pm@...r.kernel.org, linux-input@...r.kernel.org,
patches@...nsource.cirrus.com, linux-leds@...r.kernel.org,
linux-mmc@...r.kernel.org, linux-mtd@...ts.infradead.org,
linux-rtc@...r.kernel.org, linux-usb@...r.kernel.org,
linux-fbdev@...r.kernel.org, dri-devel@...ts.freedesktop.org,
alsa-devel@...a-project.org
Subject: [PATCH 21/48] ARM: pxa: eseries: use gpio lookup for audio
From: Arnd Bergmann <arnd@...db.de>
The three eseries machines have very similar drivers for audio, all
using the mach/eseries-gpio.h header for finding the gpio numbers.
Change these to use gpio descriptors to avoid the header file
dependency.
I convert the _OFF gpio numbers into GPIO_ACTIVE_LOW ones for
consistency here.
Acked-by: Mark Brown <broonie@...nel.org>
Acked-by: Robert Jarzmik <robert.jarzmik@...e.fr>
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Cc: alsa-devel@...a-project.org
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
arch/arm/mach-pxa/eseries.c | 32 ++++++++++++++++++++++++++++++++
sound/soc/pxa/e740_wm9705.c | 35 ++++++++++++++++++-----------------
sound/soc/pxa/e750_wm9705.c | 31 ++++++++++++++-----------------
sound/soc/pxa/e800_wm9712.c | 31 ++++++++++++++-----------------
4 files changed, 78 insertions(+), 51 deletions(-)
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index a8b6483ff665..2643a2a72408 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -24,6 +24,7 @@
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/memblock.h>
+#include <linux/gpio/machine.h>
#include <video/w100fb.h>
@@ -520,6 +521,16 @@ static struct platform_device e740_audio_device = {
.id = -1,
};
+static struct gpiod_lookup_table e740_audio_gpio_table = {
+ .dev_id = "e740-audio",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_E740_WM9705_nAVDD2, "Audio power", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_E740_AMP_ON, "Output amp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_E740_MIC_ON, "Mic amp", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
/* ----------------------------------------------------------------------- */
static struct platform_device *e740_devices[] __initdata = {
@@ -540,6 +551,7 @@ static void __init e740_init(void)
"UDCCLK", &pxa25x_device_udc.dev),
eseries_get_tmio_gpios();
gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
+ gpiod_add_lookup_table(&e740_audio_gpio_table);
platform_add_devices(ARRAY_AND_SIZE(e740_devices));
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&e7xx_ficp_platform_data);
@@ -716,6 +728,15 @@ static struct platform_device e750_tc6393xb_device = {
.resource = eseries_tmio_resources,
};
+static struct gpiod_lookup_table e750_audio_gpio_table = {
+ .dev_id = "e750-audio",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_E750_HP_AMP_OFF, "Output amp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_E750_SPK_AMP_OFF, "Mic amp", GPIO_ACTIVE_LOW),
+ { },
+ },
+};
+
static struct platform_device e750_audio_device = {
.name = "e750-audio",
.id = -1,
@@ -740,6 +761,7 @@ static void __init e750_init(void)
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
+ gpiod_add_lookup_table(&e750_audio_gpio_table);
platform_add_devices(ARRAY_AND_SIZE(e750_devices));
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&e7xx_ficp_platform_data);
@@ -935,6 +957,15 @@ static struct platform_device e800_tc6393xb_device = {
.resource = eseries_tmio_resources,
};
+static struct gpiod_lookup_table e800_audio_gpio_table = {
+ .dev_id = "e800-audio",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_E800_HP_AMP_OFF, "Output amp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_E800_SPK_AMP_ON, "Mic amp", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static struct platform_device e800_audio_device = {
.name = "e800-audio",
.id = -1,
@@ -959,6 +990,7 @@ static void __init e800_init(void)
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table);
+ gpiod_add_lookup_table(&e800_audio_gpio_table);
platform_add_devices(ARRAY_AND_SIZE(e800_devices));
pxa_set_ac97_info(NULL);
}
diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c
index f922be7e0016..4e0e9b778d4c 100644
--- a/sound/soc/pxa/e740_wm9705.c
+++ b/sound/soc/pxa/e740_wm9705.c
@@ -7,17 +7,19 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <linux/platform_data/asoc-pxa.h>
-#include <mach/eseries-gpio.h>
#include <asm/mach-types.h>
+static struct gpio_desc *gpiod_output_amp, *gpiod_input_amp;
+static struct gpio_desc *gpiod_audio_power;
+
#define E740_AUDIO_OUT 1
#define E740_AUDIO_IN 2
@@ -25,9 +27,9 @@ static int e740_audio_power;
static void e740_sync_audio_power(int status)
{
- gpio_set_value(GPIO_E740_WM9705_nAVDD2, !status);
- gpio_set_value(GPIO_E740_AMP_ON, (status & E740_AUDIO_OUT) ? 1 : 0);
- gpio_set_value(GPIO_E740_MIC_ON, (status & E740_AUDIO_IN) ? 1 : 0);
+ gpiod_set_value(gpiod_audio_power, !status);
+ gpiod_set_value(gpiod_output_amp, (status & E740_AUDIO_OUT) ? 1 : 0);
+ gpiod_set_value(gpiod_input_amp, (status & E740_AUDIO_IN) ? 1 : 0);
}
static int e740_mic_amp_event(struct snd_soc_dapm_widget *w,
@@ -116,36 +118,35 @@ static struct snd_soc_card e740 = {
.fully_routed = true,
};
-static struct gpio e740_audio_gpios[] = {
- { GPIO_E740_MIC_ON, GPIOF_OUT_INIT_LOW, "Mic amp" },
- { GPIO_E740_AMP_ON, GPIOF_OUT_INIT_LOW, "Output amp" },
- { GPIO_E740_WM9705_nAVDD2, GPIOF_OUT_INIT_HIGH, "Audio power" },
-};
-
static int e740_probe(struct platform_device *pdev)
{
struct snd_soc_card *card = &e740;
int ret;
- ret = gpio_request_array(e740_audio_gpios,
- ARRAY_SIZE(e740_audio_gpios));
+ gpiod_input_amp = devm_gpiod_get(&pdev->dev, "Mic amp", GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(gpiod_input_amp);
+ if (ret)
+ return ret;
+ gpiod_output_amp = devm_gpiod_get(&pdev->dev, "Output amp", GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(gpiod_output_amp);
+ if (ret)
+ return ret;
+ gpiod_audio_power = devm_gpiod_get(&pdev->dev, "Audio power", GPIOD_OUT_HIGH);
+ ret = PTR_ERR_OR_ZERO(gpiod_audio_power);
if (ret)
return ret;
card->dev = &pdev->dev;
ret = devm_snd_soc_register_card(&pdev->dev, card);
- if (ret) {
+ if (ret)
dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
ret);
- gpio_free_array(e740_audio_gpios, ARRAY_SIZE(e740_audio_gpios));
- }
return ret;
}
static int e740_remove(struct platform_device *pdev)
{
- gpio_free_array(e740_audio_gpios, ARRAY_SIZE(e740_audio_gpios));
return 0;
}
diff --git a/sound/soc/pxa/e750_wm9705.c b/sound/soc/pxa/e750_wm9705.c
index 308828cd736b..7a1e0d8bfd11 100644
--- a/sound/soc/pxa/e750_wm9705.c
+++ b/sound/soc/pxa/e750_wm9705.c
@@ -7,24 +7,25 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
#include <linux/platform_data/asoc-pxa.h>
-#include <mach/eseries-gpio.h>
#include <asm/mach-types.h>
+static struct gpio_desc *gpiod_spk_amp, *gpiod_hp_amp;
+
static int e750_spk_amp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
if (event & SND_SOC_DAPM_PRE_PMU)
- gpio_set_value(GPIO_E750_SPK_AMP_OFF, 0);
+ gpiod_set_value(gpiod_spk_amp, 1);
else if (event & SND_SOC_DAPM_POST_PMD)
- gpio_set_value(GPIO_E750_SPK_AMP_OFF, 1);
+ gpiod_set_value(gpiod_spk_amp, 0);
return 0;
}
@@ -33,9 +34,9 @@ static int e750_hp_amp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
if (event & SND_SOC_DAPM_PRE_PMU)
- gpio_set_value(GPIO_E750_HP_AMP_OFF, 0);
+ gpiod_set_value(gpiod_hp_amp, 1);
else if (event & SND_SOC_DAPM_POST_PMD)
- gpio_set_value(GPIO_E750_HP_AMP_OFF, 1);
+ gpiod_set_value(gpiod_hp_amp, 0);
return 0;
}
@@ -100,35 +101,31 @@ static struct snd_soc_card e750 = {
.fully_routed = true,
};
-static struct gpio e750_audio_gpios[] = {
- { GPIO_E750_HP_AMP_OFF, GPIOF_OUT_INIT_HIGH, "Headphone amp" },
- { GPIO_E750_SPK_AMP_OFF, GPIOF_OUT_INIT_HIGH, "Speaker amp" },
-};
-
static int e750_probe(struct platform_device *pdev)
{
struct snd_soc_card *card = &e750;
int ret;
- ret = gpio_request_array(e750_audio_gpios,
- ARRAY_SIZE(e750_audio_gpios));
+ gpiod_hp_amp = devm_gpiod_get(&pdev->dev, "Headphone amp", GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(gpiod_hp_amp);
+ if (ret)
+ return ret;
+ gpiod_spk_amp = devm_gpiod_get(&pdev->dev, "Speaker amp", GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(gpiod_spk_amp);
if (ret)
return ret;
card->dev = &pdev->dev;
ret = devm_snd_soc_register_card(&pdev->dev, card);
- if (ret) {
+ if (ret)
dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
ret);
- gpio_free_array(e750_audio_gpios, ARRAY_SIZE(e750_audio_gpios));
- }
return ret;
}
static int e750_remove(struct platform_device *pdev)
{
- gpio_free_array(e750_audio_gpios, ARRAY_SIZE(e750_audio_gpios));
return 0;
}
diff --git a/sound/soc/pxa/e800_wm9712.c b/sound/soc/pxa/e800_wm9712.c
index d74fcceef687..a39c494127cf 100644
--- a/sound/soc/pxa/e800_wm9712.c
+++ b/sound/soc/pxa/e800_wm9712.c
@@ -7,7 +7,7 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -15,15 +15,16 @@
#include <asm/mach-types.h>
#include <linux/platform_data/asoc-pxa.h>
-#include <mach/eseries-gpio.h>
+
+static struct gpio_desc *gpiod_spk_amp, *gpiod_hp_amp;
static int e800_spk_amp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
if (event & SND_SOC_DAPM_PRE_PMU)
- gpio_set_value(GPIO_E800_SPK_AMP_ON, 1);
+ gpiod_set_value(gpiod_spk_amp, 1);
else if (event & SND_SOC_DAPM_POST_PMD)
- gpio_set_value(GPIO_E800_SPK_AMP_ON, 0);
+ gpiod_set_value(gpiod_spk_amp, 0);
return 0;
}
@@ -32,9 +33,9 @@ static int e800_hp_amp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
if (event & SND_SOC_DAPM_PRE_PMU)
- gpio_set_value(GPIO_E800_HP_AMP_OFF, 0);
+ gpiod_set_value(gpiod_hp_amp, 1);
else if (event & SND_SOC_DAPM_POST_PMD)
- gpio_set_value(GPIO_E800_HP_AMP_OFF, 1);
+ gpiod_set_value(gpiod_hp_amp, 0);
return 0;
}
@@ -100,35 +101,31 @@ static struct snd_soc_card e800 = {
.num_dapm_routes = ARRAY_SIZE(audio_map),
};
-static struct gpio e800_audio_gpios[] = {
- { GPIO_E800_SPK_AMP_ON, GPIOF_OUT_INIT_HIGH, "Headphone amp" },
- { GPIO_E800_HP_AMP_OFF, GPIOF_OUT_INIT_HIGH, "Speaker amp" },
-};
-
static int e800_probe(struct platform_device *pdev)
{
struct snd_soc_card *card = &e800;
int ret;
- ret = gpio_request_array(e800_audio_gpios,
- ARRAY_SIZE(e800_audio_gpios));
+ gpiod_hp_amp = devm_gpiod_get(&pdev->dev, "Headphone amp", GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(gpiod_hp_amp);
+ if (ret)
+ return ret;
+ gpiod_spk_amp = devm_gpiod_get(&pdev->dev, "Speaker amp", GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(gpiod_spk_amp);
if (ret)
return ret;
card->dev = &pdev->dev;
ret = devm_snd_soc_register_card(&pdev->dev, card);
- if (ret) {
+ if (ret)
dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
ret);
- gpio_free_array(e800_audio_gpios, ARRAY_SIZE(e800_audio_gpios));
- }
return ret;
}
static int e800_remove(struct platform_device *pdev)
{
- gpio_free_array(e800_audio_gpios, ARRAY_SIZE(e800_audio_gpios));
return 0;
}
--
2.29.2
Powered by blists - more mailing lists