linux-kernel - Re: [PATCH 1/3] SPI: Ingenic: Add support for use GPIO as chip select line.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <797abbbe-2bef-001f-9b4c-5d8e607b2f1c@wanyeetech.com>
Date:   Wed, 20 Apr 2022 01:29:54 +0800
From:   Zhou Yanjie <zhouyanjie@...yeetech.com>
To:     Paul Cercueil <paul@...pouillou.net>
Cc:     broonie@...nel.org, robh+dt@...nel.org, krzk+dt@...nel.org,
        linux-spi@...r.kernel.org, linux-mips@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        contact@...ur-rojek.eu, dongsheng.qiu@...enic.com,
        aric.pzqi@...enic.com, rick.tyliu@...enic.com,
        sernia.zhou@...mail.com, zhenwenjin@...il.com, reimu@...omaker.com
Subject: Re: [PATCH 1/3] SPI: Ingenic: Add support for use GPIO as chip select
 line.

Hi Paul,

On 2022/4/20 上午1:13, Paul Cercueil wrote:
> Hi Zhou,
>
> Le ven., avril 15 2022 at 22:22:06 +0800, 周琰杰 (Zhou Yanjie) 
> <zhouyanjie@...yeetech.com> a écrit :
>> Add support for using GPIOs as chip select lines on Ingenic SoCs.
>>
>> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@...yeetech.com>
>> ---
>>  drivers/spi/spi-ingenic.c | 11 +++++++++--
>>  1 file changed, 9 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/spi/spi-ingenic.c b/drivers/spi/spi-ingenic.c
>> index 03077a7..672e4ed 100644
>> --- a/drivers/spi/spi-ingenic.c
>> +++ b/drivers/spi/spi-ingenic.c
>> @@ -380,7 +380,7 @@ static int spi_ingenic_probe(struct 
>> platform_device *pdev)
>>      struct spi_controller *ctlr;
>>      struct ingenic_spi *priv;
>>      void __iomem *base;
>> -    int ret;
>> +    int num_cs, ret;
>>
>>      pdata = of_device_get_match_data(dev);
>>      if (!pdata) {
>> @@ -416,6 +416,11 @@ static int spi_ingenic_probe(struct 
>> platform_device *pdev)
>>      if (IS_ERR(priv->flen_field))
>>          return PTR_ERR(priv->flen_field);
>>
>> +    if (of_property_read_u32(dev->of_node, "num-cs", &num_cs)) {
>
> One small comment here - I think it would be better to use 
> device_property_read_u32().
>
> The driver should also use device_get_match_data() instead of 
> of_device_get_match_data(), but that's a cleanup that can be done later.
>

Sure, I will send v2.


Thanks and best regards!


> Cheers,
> -Paul
>
>> +        dev_warn(dev, "Number of chip select lines not specified.\n");
>> +        num_cs = 2;
>> +    }
>> +
>>      platform_set_drvdata(pdev, ctlr);
>>
>>      ctlr->prepare_transfer_hardware = spi_ingenic_prepare_hardware;
>> @@ -429,7 +434,9 @@ static int spi_ingenic_probe(struct 
>> platform_device *pdev)
>>      ctlr->bits_per_word_mask = pdata->bits_per_word_mask;
>>      ctlr->min_speed_hz = 7200;
>>      ctlr->max_speed_hz = 54000000;
>> -    ctlr->num_chipselect = 2;
>> +    ctlr->use_gpio_descriptors = true;
>> +    ctlr->max_native_cs = 2;
>> +    ctlr->num_chipselect = num_cs;
>>      ctlr->dev.of_node = pdev->dev.of_node;
>>
>>      if (spi_ingenic_request_dma(ctlr, dev))
>> -- 
>> 2.7.4
>>
>