| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <Yl8bCE8Rjh/w4Ogz@crux>
Date: Tue, 19 Apr 2022 22:26:48 +0200
From: Artur Bujdoso <artur.bujdoso@...il.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-staging@...ts.linux.dev, linux-kernel@...r.kernel.org
Cc: Hans de Goede <hdegoede@...hat.com>,
Larry Finger <Larry.Finger@...inger.net>
Subject: [PATCH v2] staging: rtl8723bs: remove leftover code for other chips
Clean up unreferenced definitions in hal headers and code.
Signed-off-by: Artur Bujdoso <artur.bujdoso@...il.com>
---
drivers/staging/rtl8723bs/hal/HalBtcOutSrc.h | 11 -
drivers/staging/rtl8723bs/hal/hal_btcoex.c | 8 -
drivers/staging/rtl8723bs/include/HalVerDef.h | 10 -
.../staging/rtl8723bs/include/hal_com_reg.h | 295 ------------------
4 files changed, 324 deletions(-)
diff --git a/drivers/staging/rtl8723bs/hal/HalBtcOutSrc.h b/drivers/staging/rtl8723bs/hal/HalBtcOutSrc.h
index af50674b2a65..9091f2f75fe1 100644
--- a/drivers/staging/rtl8723bs/hal/HalBtcOutSrc.h
+++ b/drivers/staging/rtl8723bs/hal/HalBtcOutSrc.h
@@ -68,16 +68,6 @@ enum btc_chip_interface {
BTC_INTF_MAX
};
-enum {
- BTC_CHIP_UNDEF = 0,
- BTC_CHIP_CSR_BC4 = 1,
- BTC_CHIP_CSR_BC8 = 2,
- BTC_CHIP_RTL8723A = 3,
- BTC_CHIP_RTL8821 = 4,
- BTC_CHIP_RTL8723B = 5,
- BTC_CHIP_MAX
-};
-
/* following is for wifi link status */
#define WIFI_STA_CONNECTED BIT0
#define WIFI_AP_CONNECTED BIT1
@@ -87,7 +77,6 @@ enum {
struct btc_board_info {
/* The following is some board information */
- u8 btChipType;
u8 pgAntNum; /* pg ant number */
u8 btdmAntNum; /* ant number for btdm */
u8 btdmAntPos; /* Bryant Add to indicate Antenna Position for (pgAntNum = 2) && (btdmAntNum = 1) (DPDT+1Ant case) */
diff --git a/drivers/staging/rtl8723bs/hal/hal_btcoex.c b/drivers/staging/rtl8723bs/hal/hal_btcoex.c
index f4b3e8b28712..9acd49323c7c 100644
--- a/drivers/staging/rtl8723bs/hal/hal_btcoex.c
+++ b/drivers/staging/rtl8723bs/hal/hal_btcoex.c
@@ -1113,11 +1113,6 @@ void EXhalbtcoutsrc_Periodical(struct btc_coexist *pBtCoexist)
/* halbtcoutsrc_NormalLowPower(pBtCoexist); */
}
-void EXhalbtcoutsrc_SetChipType(u8 chipType)
-{
- GLBtCoexist.boardInfo.btChipType = BTC_CHIP_RTL8723B;
-}
-
void EXhalbtcoutsrc_SetAntNum(u8 type, u8 antNum)
{
if (BT_COEX_ANT_TYPE_PG == type) {
@@ -1188,9 +1183,6 @@ void hal_btcoex_SetChipType(struct adapter *padapter, u8 chipType)
pHalData = GET_HAL_DATA(padapter);
- pHalData->bt_coexist.btChipType = chipType;
-
- EXhalbtcoutsrc_SetChipType(chipType);
}
void hal_btcoex_SetPgAntNum(struct adapter *padapter, u8 antNum)
diff --git a/drivers/staging/rtl8723bs/include/HalVerDef.h b/drivers/staging/rtl8723bs/include/HalVerDef.h
index 8f654a49fb9d..d0ce21ccc1cc 100644
--- a/drivers/staging/rtl8723bs/include/HalVerDef.h
+++ b/drivers/staging/rtl8723bs/include/HalVerDef.h
@@ -9,16 +9,7 @@
/* hal_ic_type_e */
enum hal_ic_type_e { /* tag_HAL_IC_Type_Definition */
- CHIP_8192S = 0,
- CHIP_8188C = 1,
- CHIP_8192C = 2,
- CHIP_8192D = 3,
- CHIP_8723A = 4,
- CHIP_8188E = 5,
- CHIP_8812 = 6,
- CHIP_8821 = 7,
CHIP_8723B = 8,
- CHIP_8192E = 9,
};
/* hal_chip_type_e */
@@ -58,7 +49,6 @@ struct hal_version { /* tag_HAL_VERSION */
u8 ROMVer;
};
-/* VERSION_8192C VersionID; */
/* hal_version VersionID; */
/* Get element */
diff --git a/drivers/staging/rtl8723bs/include/hal_com_reg.h b/drivers/staging/rtl8723bs/include/hal_com_reg.h
index 8213dcf48b34..d8d03752dc2e 100644
--- a/drivers/staging/rtl8723bs/include/hal_com_reg.h
+++ b/drivers/staging/rtl8723bs/include/hal_com_reg.h
@@ -72,13 +72,9 @@
#define REG_MULTI_FUNC_CTRL 0x0068 /* RTL8723 WIFI/BT/GPS Multi-Function control source. */
#define REG_GSSR 0x006c
#define REG_AFE_XTAL_CTRL_EXT 0x0078 /* RTL8188E */
-#define REG_XCK_OUT_CTRL 0x007c /* RTL8188E */
#define REG_MCUFWDL 0x0080
-#define REG_WOL_EVENT 0x0081 /* RTL8188E */
#define REG_MCUTSTCFG 0x0084
#define REG_FDHM0 0x0088
-#define REG_HOST_SUSP_CNT 0x00BC /* RTL8192C Host suspend counter on FPGA platform */
-#define REG_SYSTEM_ON_CTRL 0x00CC /* For 8723AE Reset after S3 */
#define REG_EFUSE_ACCESS 0x00CF /* Efuse access protection for RTL8723 */
#define REG_BIST_SCAN 0x00D0
#define REG_BIST_RPT 0x00D4
@@ -117,7 +113,6 @@
#define REG_FWIMR 0x0130
#define REG_FWISR 0x0134
#define REG_FTIMR 0x0138
-#define REG_FTISR 0x013C /* RTL8192C */
#define REG_PKTBUF_DBG_CTRL 0x0140
#define REG_RXPKTBUF_CTRL (REG_PKTBUF_DBG_CTRL+2)
#define REG_PKTBUF_DBG_DATA_L 0x0144
@@ -132,11 +127,9 @@
#define REG_MBIST_START 0x0174
#define REG_MBIST_DONE 0x0178
#define REG_MBIST_FAIL 0x017C
-#define REG_32K_CTRL 0x0194 /* RTL8188E */
#define REG_C2HEVT_MSG_NORMAL 0x01A0
#define REG_C2HEVT_CLEAR 0x01AF
#define REG_MCUTST_1 0x01c0
-#define REG_MCUTST_WOWLAN 0x01C7 /* Defined after 8188E series. */
#define REG_FMETHR 0x01C8
#define REG_HMETFR 0x01CC
#define REG_HMEBOX_0 0x01D0
@@ -525,44 +518,6 @@
#define MAX_MSS_DENSITY_2T 0x13
#define MAX_MSS_DENSITY_1T 0x0A
-/* */
-/* 8192C Cmd9346CR bits (Offset 0xA, 16bit) */
-/* */
-#define CmdEEPROM_En BIT5 /* EEPROM enable when set 1 */
-#define CmdEERPOMSEL BIT4 /* System EEPROM select, 0: boot from E-FUSE, 1: The EEPROM used is 9346 */
-#define Cmd9346CR_9356SEL BIT4
-
-/* */
-/* 8192C GPIO MUX Configuration Register (offset 0x40, 4 byte) */
-/* */
-#define GPIOSEL_GPIO 0
-#define GPIOSEL_ENBT BIT5
-
-/* */
-/* 8192C GPIO PIN Control Register (offset 0x44, 4 byte) */
-/* */
-#define GPIO_IN REG_GPIO_PIN_CTRL /* GPIO pins input value */
-#define GPIO_OUT (REG_GPIO_PIN_CTRL+1) /* GPIO pins output value */
-#define GPIO_IO_SEL (REG_GPIO_PIN_CTRL+2) /* GPIO pins output enable when a bit is set to "1"; otherwise, input is configured. */
-#define GPIO_MOD (REG_GPIO_PIN_CTRL+3)
-
-/* */
-/* 8811A GPIO PIN Control Register (offset 0x60, 4 byte) */
-/* */
-#define GPIO_IN_8811A REG_GPIO_PIN_CTRL_2 /* GPIO pins input value */
-#define GPIO_OUT_8811A (REG_GPIO_PIN_CTRL_2+1) /* GPIO pins output value */
-#define GPIO_IO_SEL_8811A (REG_GPIO_PIN_CTRL_2+2) /* GPIO pins output enable when a bit is set to "1"; otherwise, input is configured. */
-#define GPIO_MOD_8811A (REG_GPIO_PIN_CTRL_2+3)
-
-/* */
-/* 8723/8188E Host System Interrupt Mask Register (offset 0x58, 32 byte) */
-/* */
-#define HSIMR_GPIO12_0_INT_EN BIT0
-#define HSIMR_SPS_OCP_INT_EN BIT5
-#define HSIMR_RON_INT_EN BIT6
-#define HSIMR_PDN_INT_EN BIT7
-#define HSIMR_GPIO9_INT_EN BIT25
-
/* */
/* 8723/8188E Host System Interrupt Status Register (offset 0x5C, 32 byte) */
/* */
@@ -572,22 +527,6 @@
#define HSISR_PDNINT BIT7
#define HSISR_GPIO9_INT BIT25
-/* */
-/* 8192C (MSR) Media Status Register (Offset 0x4C, 8 bits) */
-/* */
-/*
-Network Type
-00: No link
-01: Link in ad hoc network
-10: Link in infrastructure network
-11: AP mode
-Default: 00b.
-*/
-#define MSR_NOLINK 0x00
-#define MSR_ADHOC 0x01
-#define MSR_INFRA 0x02
-#define MSR_AP 0x03
-
/* */
/* USB INTR CONTENT */
/* */
@@ -786,206 +725,6 @@ Default: 00b.
#define IMR_OCPINT BIT1
#define IMR_WLANOFF BIT0
-/* */
-/* 8723E series PCIE Host IMR/ISR bit */
-/* */
-/* IMR DW0 Bit 0-31 */
-#define PHIMR_TIMEOUT2 BIT31
-#define PHIMR_TIMEOUT1 BIT30
-#define PHIMR_PSTIMEOUT BIT29
-#define PHIMR_GTINT4 BIT28
-#define PHIMR_GTINT3 BIT27
-#define PHIMR_TXBCNERR BIT26
-#define PHIMR_TXBCNOK BIT25
-#define PHIMR_TSF_BIT32_TOGGLE BIT24
-#define PHIMR_BCNDMAINT3 BIT23
-#define PHIMR_BCNDMAINT2 BIT22
-#define PHIMR_BCNDMAINT1 BIT21
-#define PHIMR_BCNDMAINT0 BIT20
-#define PHIMR_BCNDOK3 BIT19
-#define PHIMR_BCNDOK2 BIT18
-#define PHIMR_BCNDOK1 BIT17
-#define PHIMR_BCNDOK0 BIT16
-#define PHIMR_HSISR_IND_ON BIT15
-#define PHIMR_BCNDMAINT_E BIT14
-#define PHIMR_ATIMEND_E BIT13
-#define PHIMR_ATIM_CTW_END BIT12
-#define PHIMR_HISRE_IND BIT11 /* RO. HISRE Indicator (HISRE & HIMRE is true, this bit is set to 1) */
-#define PHIMR_C2HCMD BIT10
-#define PHIMR_CPWM2 BIT9
-#define PHIMR_CPWM BIT8
-#define PHIMR_HIGHDOK BIT7 /* High Queue DMA OK Interrupt */
-#define PHIMR_MGNTDOK BIT6 /* Management Queue DMA OK Interrupt */
-#define PHIMR_BKDOK BIT5 /* AC_BK DMA OK Interrupt */
-#define PHIMR_BEDOK BIT4 /* AC_BE DMA OK Interrupt */
-#define PHIMR_VIDOK BIT3 /* AC_VI DMA OK Interrupt */
-#define PHIMR_VODOK BIT2 /* AC_VO DMA Interrupt */
-#define PHIMR_RDU BIT1 /* Receive Descriptor Unavailable */
-#define PHIMR_ROK BIT0 /* Receive DMA OK Interrupt */
-
-/* PCIE Host Interrupt Status Extension bit */
-#define PHIMR_BCNDMAINT7 BIT23
-#define PHIMR_BCNDMAINT6 BIT22
-#define PHIMR_BCNDMAINT5 BIT21
-#define PHIMR_BCNDMAINT4 BIT20
-#define PHIMR_BCNDOK7 BIT19
-#define PHIMR_BCNDOK6 BIT18
-#define PHIMR_BCNDOK5 BIT17
-#define PHIMR_BCNDOK4 BIT16
-/* bit12 15: RSVD */
-#define PHIMR_TXERR BIT11
-#define PHIMR_RXERR BIT10
-#define PHIMR_TXFOVW BIT9
-#define PHIMR_RXFOVW BIT8
-/* bit2-7: RSVD */
-#define PHIMR_OCPINT BIT1
-/* bit0: RSVD */
-
-#define UHIMR_TIMEOUT2 BIT31
-#define UHIMR_TIMEOUT1 BIT30
-#define UHIMR_PSTIMEOUT BIT29
-#define UHIMR_GTINT4 BIT28
-#define UHIMR_GTINT3 BIT27
-#define UHIMR_TXBCNERR BIT26
-#define UHIMR_TXBCNOK BIT25
-#define UHIMR_TSF_BIT32_TOGGLE BIT24
-#define UHIMR_BCNDMAINT3 BIT23
-#define UHIMR_BCNDMAINT2 BIT22
-#define UHIMR_BCNDMAINT1 BIT21
-#define UHIMR_BCNDMAINT0 BIT20
-#define UHIMR_BCNDOK3 BIT19
-#define UHIMR_BCNDOK2 BIT18
-#define UHIMR_BCNDOK1 BIT17
-#define UHIMR_BCNDOK0 BIT16
-#define UHIMR_HSISR_IND BIT15
-#define UHIMR_BCNDMAINT_E BIT14
-/* RSVD BIT13 */
-#define UHIMR_CTW_END BIT12
-/* RSVD BIT11 */
-#define UHIMR_C2HCMD BIT10
-#define UHIMR_CPWM2 BIT9
-#define UHIMR_CPWM BIT8
-#define UHIMR_HIGHDOK BIT7 /* High Queue DMA OK Interrupt */
-#define UHIMR_MGNTDOK BIT6 /* Management Queue DMA OK Interrupt */
-#define UHIMR_BKDOK BIT5 /* AC_BK DMA OK Interrupt */
-#define UHIMR_BEDOK BIT4 /* AC_BE DMA OK Interrupt */
-#define UHIMR_VIDOK BIT3 /* AC_VI DMA OK Interrupt */
-#define UHIMR_VODOK BIT2 /* AC_VO DMA Interrupt */
-#define UHIMR_RDU BIT1 /* Receive Descriptor Unavailable */
-#define UHIMR_ROK BIT0 /* Receive DMA OK Interrupt */
-
-/* USB Host Interrupt Status Extension bit */
-#define UHIMR_BCNDMAINT7 BIT23
-#define UHIMR_BCNDMAINT6 BIT22
-#define UHIMR_BCNDMAINT5 BIT21
-#define UHIMR_BCNDMAINT4 BIT20
-#define UHIMR_BCNDOK7 BIT19
-#define UHIMR_BCNDOK6 BIT18
-#define UHIMR_BCNDOK5 BIT17
-#define UHIMR_BCNDOK4 BIT16
-/* bit14-15: RSVD */
-#define UHIMR_ATIMEND_E BIT13
-#define UHIMR_ATIMEND BIT12
-#define UHIMR_TXERR BIT11
-#define UHIMR_RXERR BIT10
-#define UHIMR_TXFOVW BIT9
-#define UHIMR_RXFOVW BIT8
-/* bit2-7: RSVD */
-#define UHIMR_OCPINT BIT1
-/* bit0: RSVD */
-
-
-#define HAL_NIC_UNPLUG_ISR 0xFFFFFFFF /* The value when the NIC is unplugged for PCI. */
-#define HAL_NIC_UNPLUG_PCI_ISR 0xEAEAEAEA /* The value when the NIC is unplugged for PCI in PCI interrupt (page 3). */
-
-/* */
-/* 8188 IMR/ISR bits */
-/* */
-#define IMR_DISABLED_88E 0x0
-/* IMR DW0(0x0060-0063) Bit 0-31 */
-#define IMR_TXCCK_88E BIT30 /* TXRPT interrupt when CCX bit of the packet is set */
-#define IMR_PSTIMEOUT_88E BIT29 /* Power Save Time Out Interrupt */
-#define IMR_GTINT4_88E BIT28 /* When GTIMER4 expires, this bit is set to 1 */
-#define IMR_GTINT3_88E BIT27 /* When GTIMER3 expires, this bit is set to 1 */
-#define IMR_TBDER_88E BIT26 /* Transmit Beacon0 Error */
-#define IMR_TBDOK_88E BIT25 /* Transmit Beacon0 OK */
-#define IMR_TSF_BIT32_TOGGLE_88E BIT24 /* TSF Timer BIT32 toggle indication interrupt */
-#define IMR_BCNDMAINT0_88E BIT20 /* Beacon DMA Interrupt 0 */
-#define IMR_BCNDERR0_88E BIT16 /* Beacon Queue DMA Error 0 */
-#define IMR_HSISR_IND_ON_INT_88E BIT15 /* HSISR Indicator (HSIMR & HSISR is true, this bit is set to 1) */
-#define IMR_BCNDMAINT_E_88E BIT14 /* Beacon DMA Interrupt Extension for Win7 */
-#define IMR_ATIMEND_88E BIT12 /* CTWidnow End or ATIM Window End */
-#define IMR_HISR1_IND_INT_88E BIT11 /* HISR1 Indicator (HISR1 & HIMR1 is true, this bit is set to 1) */
-#define IMR_C2HCMD_88E BIT10 /* CPU to Host Command INT Status, Write 1 clear */
-#define IMR_CPWM2_88E BIT9 /* CPU power Mode exchange INT Status, Write 1 clear */
-#define IMR_CPWM_88E BIT8 /* CPU power Mode exchange INT Status, Write 1 clear */
-#define IMR_HIGHDOK_88E BIT7 /* High Queue DMA OK */
-#define IMR_MGNTDOK_88E BIT6 /* Management Queue DMA OK */
-#define IMR_BKDOK_88E BIT5 /* AC_BK DMA OK */
-#define IMR_BEDOK_88E BIT4 /* AC_BE DMA OK */
-#define IMR_VIDOK_88E BIT3 /* AC_VI DMA OK */
-#define IMR_VODOK_88E BIT2 /* AC_VO DMA OK */
-#define IMR_RDU_88E BIT1 /* Rx Descriptor Unavailable */
-#define IMR_ROK_88E BIT0 /* Receive DMA OK */
-
-/* IMR DW1(0x00B4-00B7) Bit 0-31 */
-#define IMR_BCNDMAINT7_88E BIT27 /* Beacon DMA Interrupt 7 */
-#define IMR_BCNDMAINT6_88E BIT26 /* Beacon DMA Interrupt 6 */
-#define IMR_BCNDMAINT5_88E BIT25 /* Beacon DMA Interrupt 5 */
-#define IMR_BCNDMAINT4_88E BIT24 /* Beacon DMA Interrupt 4 */
-#define IMR_BCNDMAINT3_88E BIT23 /* Beacon DMA Interrupt 3 */
-#define IMR_BCNDMAINT2_88E BIT22 /* Beacon DMA Interrupt 2 */
-#define IMR_BCNDMAINT1_88E BIT21 /* Beacon DMA Interrupt 1 */
-#define IMR_BCNDOK7_88E BIT20 /* Beacon Queue DMA OK Interrupt 7 */
-#define IMR_BCNDOK6_88E BIT19 /* Beacon Queue DMA OK Interrupt 6 */
-#define IMR_BCNDOK5_88E BIT18 /* Beacon Queue DMA OK Interrupt 5 */
-#define IMR_BCNDOK4_88E BIT17 /* Beacon Queue DMA OK Interrupt 4 */
-#define IMR_BCNDOK3_88E BIT16 /* Beacon Queue DMA OK Interrupt 3 */
-#define IMR_BCNDOK2_88E BIT15 /* Beacon Queue DMA OK Interrupt 2 */
-#define IMR_BCNDOK1_88E BIT14 /* Beacon Queue DMA OK Interrupt 1 */
-#define IMR_ATIMEND_E_88E BIT13 /* ATIM Window End Extension for Win7 */
-#define IMR_TXERR_88E BIT11 /* Tx Error Flag Interrupt Status, write 1 clear. */
-#define IMR_RXERR_88E BIT10 /* Rx Error Flag INT Status, Write 1 clear */
-#define IMR_TXFOVW_88E BIT9 /* Transmit FIFO Overflow */
-#define IMR_RXFOVW_88E BIT8 /* Receive FIFO Overflow */
-
-/*===================================================================
-=====================================================================
-Here the register defines are for 92C. When the define is as same with 92C,
-we will use the 92C's define for the consistency
-So the following defines for 92C is not entire!!!!!!
-=====================================================================
-=====================================================================*/
-/*
-Based on Datasheet V33---090401
-Register Summary
-Current IOREG MAP
-0x0000h ~ 0x00FFh System Configuration (256 Bytes)
-0x0100h ~ 0x01FFh MACTOP General Configuration (256 Bytes)
-0x0200h ~ 0x027Fh TXDMA Configuration (128 Bytes)
-0x0280h ~ 0x02FFh RXDMA Configuration (128 Bytes)
-0x0300h ~ 0x03FFh PCIE EMAC Reserved Region (256 Bytes)
-0x0400h ~ 0x04FFh Protocol Configuration (256 Bytes)
-0x0500h ~ 0x05FFh EDCA Configuration (256 Bytes)
-0x0600h ~ 0x07FFh WMAC Configuration (512 Bytes)
-0x2000h ~ 0x3FFFh 8051 FW Download Region (8196 Bytes)
-*/
- /* */
- /* 8192C (TXPAUSE) transmission pause (Offset 0x522, 8 bits) */
- /* */
-/* Note: */
-/* The bits of stopping AC(VO/VI/BE/BK) queue in datasheet RTL8192S/RTL8192C are wrong, */
-/* the correct arrangement is VO - Bit0, VI - Bit1, BE - Bit2, and BK - Bit3. */
-/* 8723 and 88E may be not correct either in the earlier version. Confirmed with DD Tim. */
-/* By Bruce, 2011-09-22. */
-#define StopBecon BIT6
-#define StopHigh BIT5
-#define StopMgt BIT4
-#define StopBK BIT3
-#define StopBE BIT2
-#define StopVI BIT1
-#define StopVO BIT0
-
/* */
/* 8192C (RCR) Receive Configuration Register (Offset 0x608, 32 bits) */
/* */
@@ -1557,10 +1296,6 @@ Current IOREG MAP
#define SDIO_HIMR_ATIMEND_E_MSK BIT26
#define SDIO_HIMR_CTWEND_MSK BIT27
-/* RTL8188E SDIO Specific */
-#define SDIO_HIMR_MCU_ERR_MSK BIT28
-#define SDIO_HIMR_TSF_BIT32_TOGGLE_MSK BIT29
-
/* SDIO Host Interrupt Service Routine */
#define SDIO_HISR_RX_REQUEST BIT0
#define SDIO_HISR_AVAL BIT1
@@ -1583,10 +1318,6 @@ Current IOREG MAP
#define SDIO_HISR_ATIMEND_E BIT26
#define SDIO_HISR_CTWEND BIT27
-/* RTL8188E SDIO Specific */
-#define SDIO_HISR_MCU_ERR BIT28
-#define SDIO_HISR_TSF_BIT32_TOGGLE BIT29
-
#define MASK_SDIO_HISR_CLEAR (SDIO_HISR_TXERR |\
SDIO_HISR_RXERR |\
SDIO_HISR_TXFOVW |\
@@ -1651,39 +1382,13 @@ Current IOREG MAP
#define GPS_HWPDN_SL BIT21 /* GPS HW PDn polarity control */
#define GPS_FUNC_EN BIT22 /* GPS function enable */
-/* 3 REG_LIFECTRL_CTRL */
-#define HAL92C_EN_PKT_LIFE_TIME_BK BIT3
-#define HAL92C_EN_PKT_LIFE_TIME_BE BIT2
-#define HAL92C_EN_PKT_LIFE_TIME_VI BIT1
-#define HAL92C_EN_PKT_LIFE_TIME_VO BIT0
-
-#define HAL92C_MSDU_LIFE_TIME_UNIT 128 /* in us, said by Tim. */
-
-/* 2 8192D PartNo. */
-#define PARTNO_92D_NIC (BIT7|BIT6)
-#define PARTNO_92D_NIC_REMARK (BIT5|BIT4)
-#define PARTNO_SINGLE_BAND_VS BIT3
-#define PARTNO_SINGLE_BAND_VS_REMARK BIT1
-#define PARTNO_CONCURRENT_BAND_VC (BIT3|BIT2)
-#define PARTNO_CONCURRENT_BAND_VC_REMARK (BIT1|BIT0)
-
/* */
/* General definitions */
/* */
-#define LAST_ENTRY_OF_TX_PKT_BUFFER_8188E 176
-#define LAST_ENTRY_OF_TX_PKT_BUFFER_8812 255
#define LAST_ENTRY_OF_TX_PKT_BUFFER_8723B 255
-#define LAST_ENTRY_OF_TX_PKT_BUFFER_8192C 255
-#define LAST_ENTRY_OF_TX_PKT_BUFFER_DUAL_MAC 127
#define POLLING_LLT_THRESHOLD 20
#define POLLING_READY_TIMEOUT_COUNT 1000
-
-/* GPIO BIT */
-#define HAL_8192C_HW_GPIO_WPS_BIT BIT2
-#define HAL_8192EU_HW_GPIO_WPS_BIT BIT7
-#define HAL_8188E_HW_GPIO_WPS_BIT BIT7
-
#endif /* __HAL_COMMON_H__ */
--
2.30.2
Powered by blists - more mailing lists