| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAKfTPtAZMwgKK8m5vdEjsXRJ73YWrZePoCtCu5KKBELtQMp3DA@mail.gmail.com>
Date: Tue, 19 Apr 2022 12:08:19 +0200
From: Vincent Guittot <vincent.guittot@...aro.org>
To: Vincent Donnefort <vincent.donnefort@....com>
Cc: peterz@...radead.org, mingo@...hat.com,
linux-kernel@...r.kernel.org, dietmar.eggemann@....com,
morten.rasmussen@....com, chris.redpath@....com, qperret@...gle.com
Subject: Re: [PATCH v4 2/7] sched/fair: Decay task PELT values during wakeup migration
On Tue, 12 Apr 2022 at 15:42, Vincent Donnefort
<vincent.donnefort@....com> wrote:
>
> Before being migrated to a new CPU, a task sees its PELT values
> synchronized with rq last_update_time. Once done, that same task will also
> have its sched_avg last_update_time reset. This means the time between
> the migration and the last clock update (B) will not be accounted for in
> util_avg and a discontinuity will appear. This issue is amplified by the
> PELT clock scaling. If the clock hasn't been updated while the CPU is
> idle, clock_pelt will not be aligned with clock_task and that time (A)
> will be also lost.
>
> ---------|----- A -----|-----------|------- B -----|>
> clock_pelt clock_task clock now
>
> This is especially problematic for asymmetric CPU capacity systems which
> need stable util_avg signals for task placement and energy estimation.
>
> Ideally, this problem would be solved by updating the runqueue clocks
> before the migration. But that would require taking the runqueue lock
> which is quite expensive [1]. Instead estimate the missing time and update
> the task util_avg with that value:
>
> A + B = clock_task - clock_pelt + sched_clock_cpu() - clock
>
> Neither clock_task, clock_pelt nor clock can be accessed without the
> runqueue lock. The new cfs_rq last_update_lag is therefore created and
> contains those three values when the last_update_time value for that very
> same cfs_rq is updated.
>
> last_update_lag = clock - clock_task + clock_pelt
>
> And we can then write the missing time as follow:
>
> A + B = sched_clock_cpu() - last_update_lag
>
> The B. part of the missing time is however an estimation that doesn't take
> into account IRQ and Paravirt time.
>
> Now we have an estimation for A + B, we can create an estimator for the
> PELT value at the time of the migration. We need for this purpose to
> inject last_update_time which is a combination of both clock_pelt and
> lost_idle_time. The latter is a time value which is completely lost from a
> PELT point of view and must be ignored. And finally, we can write:
>
> now = last_update_time + A + B
> = last_update_time + sched_clock_cpu() - last_update_lag
>
> This estimation has a cost, mostly due to sched_clock_cpu(). Limit the
> usage to the case where the source CPU is idle as we know this is when the
> clock is having the biggest risk of being outdated.
>
> [1] https://lore.kernel.org/all/20190709115759.10451-1-chris.redpath@arm.com/
>
> Signed-off-by: Vincent Donnefort <vincent.donnefort@....com>
>
> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> index 5dd38c9df0cc..e234d015657f 100644
> --- a/kernel/sched/fair.c
> +++ b/kernel/sched/fair.c
> @@ -3694,6 +3694,57 @@ static inline void add_tg_cfs_propagate(struct cfs_rq *cfs_rq, long runnable_sum
>
> #endif /* CONFIG_FAIR_GROUP_SCHED */
>
> +#ifdef CONFIG_NO_HZ_COMMON
> +static inline void update_cfs_rq_lag(struct cfs_rq *cfs_rq)
> +{
> + struct rq *rq = rq_of(cfs_rq);
> +
> + u64_u32_store(cfs_rq->last_update_lag,
> +#ifdef CONFIG_CFS_BANDWIDTH
> + /* Timer stopped by throttling */
> + unlikely(cfs_rq->throttle_count) ? U64_MAX :
> +#endif
> + rq->clock - rq->clock_task + rq->clock_pelt);
I'm worried that we will call this for each and every
update_cfs_rq_load_avg() whereas the content will be used only when
idle and not throttled. Can't we use these conditions to save values
only when needed and limit the number of useless updates ?
A quick test with hackbench on a 8 cpus system gives
around 60k call for a duration 550 msec run a root level
and 180k from a 3rd level cgroups
> +}
> +
> +static inline void migrate_se_pelt_lag(struct sched_entity *se)
> +{
> + u64 now, last_update_lag;
> + struct cfs_rq *cfs_rq;
> + struct rq *rq;
> + bool is_idle;
> +
> + cfs_rq = cfs_rq_of(se);
> + rq = rq_of(cfs_rq);
> +
> + rcu_read_lock();
> + is_idle = is_idle_task(rcu_dereference(rq->curr));
> + rcu_read_unlock();
> +
> + /*
> + * The lag estimation comes with a cost we don't want to pay all the
> + * time. Hence, limiting to the case where the source CPU is idle and
> + * we know we are at the greatest risk to have an outdated clock.
> + */
> + if (!is_idle)
> + return;
> +
> + last_update_lag = u64_u32_load(cfs_rq->last_update_lag);
> +
> + /* The clock has been stopped for throttling */
> + if (last_update_lag == U64_MAX)
> + return;
> +
> + now = se->avg.last_update_time - last_update_lag +
> + sched_clock_cpu(cpu_of(rq));
> +
> + __update_load_avg_blocked_se(now, se);
> +}
> +#else
> +static void update_cfs_rq_lag(struct cfs_rq *cfs_rq) {}
> +static void migrate_se_pelt_lag(struct sched_entity *se) {}
> +#endif
> +
> /**
> * update_cfs_rq_load_avg - update the cfs_rq's load/util averages
> * @now: current time, as per cfs_rq_clock_pelt()
> @@ -3774,6 +3825,7 @@ update_cfs_rq_load_avg(u64 now, struct cfs_rq *cfs_rq)
> cfs_rq->last_update_time_copy,
> sa->last_update_time);
> #endif
> + update_cfs_rq_lag(cfs_rq);
>
> return decayed;
> }
> @@ -6946,6 +6998,8 @@ static void detach_entity_cfs_rq(struct sched_entity *se);
> */
> static void migrate_task_rq_fair(struct task_struct *p, int new_cpu)
> {
> + struct sched_entity *se = &p->se;
> +
> /*
> * As blocked tasks retain absolute vruntime the migration needs to
> * deal with this by subtracting the old and adding the new
> @@ -6953,7 +7007,6 @@ static void migrate_task_rq_fair(struct task_struct *p, int new_cpu)
> * the task on the new runqueue.
> */
> if (READ_ONCE(p->__state) == TASK_WAKING) {
> - struct sched_entity *se = &p->se;
> struct cfs_rq *cfs_rq = cfs_rq_of(se);
>
> se->vruntime -= u64_u32_load(cfs_rq->min_vruntime);
> @@ -6965,25 +7018,28 @@ static void migrate_task_rq_fair(struct task_struct *p, int new_cpu)
> * rq->lock and can modify state directly.
> */
> lockdep_assert_rq_held(task_rq(p));
> - detach_entity_cfs_rq(&p->se);
> + detach_entity_cfs_rq(se);
>
> } else {
> + remove_entity_load_avg(se);
> +
> /*
> - * We are supposed to update the task to "current" time, then
> - * its up to date and ready to go to new CPU/cfs_rq. But we
> - * have difficulty in getting what current time is, so simply
> - * throw away the out-of-date time. This will result in the
> - * wakee task is less decayed, but giving the wakee more load
> - * sounds not bad.
> + * Here, the task's PELT values have been updated according to
> + * the current rq's clock. But if that clock hasn't been
> + * updated in a while, a substantial idle time will be missed,
> + * leading to an inflation after wake-up on the new rq.
> + *
> + * Estimate the missing time from the rq clock and update
> + * sched_avg to improve the PELT continuity after migration.
> */
> - remove_entity_load_avg(&p->se);
> + migrate_se_pelt_lag(se);
> }
>
> /* Tell new CPU we are migrated */
> - p->se.avg.last_update_time = 0;
> + se->avg.last_update_time = 0;
>
> /* We have migrated, no longer consider this task hot */
> - p->se.exec_start = 0;
> + se->exec_start = 0;
>
> update_scan_period(p, new_cpu);
> }
> diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
> index e2cf6e48b165..2f6446295e7d 100644
> --- a/kernel/sched/sched.h
> +++ b/kernel/sched/sched.h
> @@ -593,6 +593,12 @@ struct cfs_rq {
> struct sched_avg avg;
> #ifndef CONFIG_64BIT
> u64 last_update_time_copy;
> +#endif
> +#ifdef CONFIG_NO_HZ_COMMON
> + u64 last_update_lag;
> +#ifndef CONFIG_64BIT
> + u64 last_update_lag_copy;
> +#endif
> #endif
> struct {
> raw_spinlock_t lock ____cacheline_aligned;
> --
> 2.25.1
>
Powered by blists - more mailing lists