| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <c9124bdc-397a-8c1a-1133-1f85a0d37538@quicinc.com>
Date: Tue, 19 Apr 2022 16:58:12 +0530
From: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
To: Matthias Kaehlcke <mka@...omium.org>
CC: <agross@...nel.org>, <bjorn.andersson@...aro.org>,
<robh+dt@...nel.org>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<quic_rohkumar@...cinc.com>, <srinivas.kandagatla@...aro.org>,
<dianders@...omium.org>, <swboyd@...omium.org>,
<judyhsiao@...omium.org>,
Venkata Prasad Potturu <quic_potturu@...cinc.com>
Subject: Re: [PATCH v8 4/4] arm64: dts: qcom: sc7280: Add dt nodes for sound
card
On 4/18/2022 11:32 PM, Matthias Kaehlcke wrote:
Thanks for your time Matthias!!!
> On Mon, Apr 18, 2022 at 07:44:12PM +0530, Srinivasa Rao Mandadapu wrote:
>> Add dt nodes for sound card support, which is using WCD938x headset
>> playback, capture, I2S speaker playback and DMICs via VA macro.
>>
>> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
>> Co-developed-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
>> Signed-off-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
>> ---
>> arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts | 23 ++++++++
>> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 93 ++++++++++++++++++++++++++++++
>> 2 files changed, 116 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
>> index aa0bf6e2..bf15bbe 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
>> @@ -87,6 +87,29 @@ ap_ts_pen_1v8: &i2c13 {
>> pins = "gpio51";
>> };
>>
>> +&sound {
>> + audio-routing =
>> + "IN1_HPHL", "HPHL_OUT",
>> + "IN2_HPHR", "HPHR_OUT",
>> + "AMIC1", "MIC BIAS1",
>> + "AMIC2", "MIC BIAS2",
>> + "VA DMIC0", "MIC BIAS1",
>> + "VA DMIC1", "MIC BIAS1",
>> + "VA DMIC2", "MIC BIAS3",
>> + "VA DMIC3", "MIC BIAS3",
>> + "TX SWR_ADC0", "ADC1_OUTPUT",
>> + "TX SWR_ADC1", "ADC2_OUTPUT",
>> + "TX SWR_ADC2", "ADC3_OUTPUT",
>> + "TX SWR_DMIC0", "DMIC1_OUTPUT",
>> + "TX SWR_DMIC1", "DMIC2_OUTPUT",
>> + "TX SWR_DMIC2", "DMIC3_OUTPUT",
>> + "TX SWR_DMIC3", "DMIC4_OUTPUT",
>> + "TX SWR_DMIC4", "DMIC5_OUTPUT",
>> + "TX SWR_DMIC5", "DMIC6_OUTPUT",
>> + "TX SWR_DMIC6", "DMIC7_OUTPUT",
>> + "TX SWR_DMIC7", "DMIC8_OUTPUT";
>> +};
> Should this also be added to sc7280-herobrine-crd.dts?
Okay. Will add it corresponding dts file.
>
>> +
>> &wcd938x {
>> pinctrl-names = "default";
>> pinctrl-0 = <&us_euro_hs_sel>;
>> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> index e880837..640b1338 100644
>> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
>> @@ -85,6 +85,99 @@
>> pinctrl-names = "default";
>> pinctrl-0 = <&nvme_pwren>;
>> };
>> +
>> + sound: sound {
>> + compatible = "google,sc7280-herobrine";
>> + model = "sc7280-wcd938x-max98360a-1mic";
>> +
>> + audio-routing =
>> + "IN1_HPHL", "HPHL_OUT",
>> + "IN2_HPHR", "HPHR_OUT",
>> + "AMIC1", "MIC BIAS1",
>> + "AMIC2", "MIC BIAS2",
>> + "VA DMIC0", "MIC BIAS3",
>> + "VA DMIC1", "MIC BIAS3",
>> + "VA DMIC2", "MIC BIAS1",
>> + "VA DMIC3", "MIC BIAS1",
>> + "TX SWR_ADC0", "ADC1_OUTPUT",
>> + "TX SWR_ADC1", "ADC2_OUTPUT",
>> + "TX SWR_ADC2", "ADC3_OUTPUT",
>> + "TX SWR_DMIC0", "DMIC1_OUTPUT",
>> + "TX SWR_DMIC1", "DMIC2_OUTPUT",
>> + "TX SWR_DMIC2", "DMIC3_OUTPUT",
>> + "TX SWR_DMIC3", "DMIC4_OUTPUT",
>> + "TX SWR_DMIC4", "DMIC5_OUTPUT",
>> + "TX SWR_DMIC5", "DMIC6_OUTPUT",
>> + "TX SWR_DMIC6", "DMIC7_OUTPUT",
>> + "TX SWR_DMIC7", "DMIC8_OUTPUT";
>> +
>> + qcom,msm-mbhc-hphl-swh = <1>;
>> + qcom,msm-mbhc-gnd-swh = <1>;
>> +
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + #sound-dai-cells = <0>;
>> +
>> + dai-link@1 {
> The '@1' is the address of the lpass CPU DAI, which doesn't seem correct
> here. As I brought up on v7 [1] I think this value isn't even necessarily
> unique, a SoC could have multiple IP blocks with audio buses, each with
> their own DAI address space. The binding (currently) requires an
> 'address'/id, rather than using the CPU DAI id I suggest to enumerate the
> links linearly, starting with 0.
Okay. Will update accordingly.
>
> [1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1649863277-31615-5-git-send-email-quic_srivasam@quicinc.com/
>
>> + link-name = "MAX98360A";
> The binding requires a 'reg' property, even though it isn't used (also
> discussed on v7). I think the 'reg' property should be removed from the
> binding and the DTs that use it, but maybe that should be done in a
> separate series. In the meantime the value should match that of the
> node.
Okay. for now will revert this change. and will take care your
suggestion in a separate patch set.
>
>> +
>> + cpu {
>> + sound-dai = <&lpass_cpu MI2S_SECONDARY>;
>> + };
>> +
>> + codec {
>> + sound-dai = <&max98360a>;
>> + };
>> + };
>> +
>> + dai-link@5 {
>> + link-name = "DisplayPort";
>> +
>> + cpu {
>> + sound-dai = <&lpass_cpu LPASS_DP_RX>;
>> + };
>> +
>> + codec {
>> + sound-dai = <&mdss_dp>;
>> + };
>> + };
>> +
>> + dai-link@6 {
>> + link-name = "WCD9385 Playback";
>> +
>> + cpu {
>> + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
>> + };
>> +
>> + codec {
>> + sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>;
>> + };
>> + };
>> +
>> + dai-link@19 {
>> + link-name = "WCD9385 Capture";
>> +
>> + cpu {
>> + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
>> + };
>> +
>> + codec {
>> + sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>;
>> + };
>> + };
>> +
>> + dai-link@25 {
>> + link-name = "DMIC";
>> +
>> + cpu {
>> + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
>> + };
>> +
>> + codec {
>> + sound-dai = <&lpass_va_macro 0>;
>> + };
>> + };
>> + };
>> };
>>
>> &apps_rsc {
>> --
>> 2.7.4
>>
Powered by blists - more mailing lists