| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2732e2ad-03bb-b30a-c649-08898419185b@xs4all.nl>
Date: Wed, 20 Apr 2022 09:54:35 +0200
From: Hans Verkuil <hverkuil@...all.nl>
To: Yuji Ishikawa <yuji2.ishikawa@...hiba.co.jp>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@...hiba.co.jp>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: linux-media@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 0/5] Visconti: Add Toshiba Visconti Video Input
Interface driver
Hi Yuji,
On 14/04/2022 07:35, Yuji Ishikawa wrote:
> This series is the Video Input Interface driver for Toshiba's ARM SoC, Visconti[0].
> This provides DT binding documentation, device driver, MAINTAINER fiels.
>
> Best regards,
> Yuji
>
> [0]: https://toshiba.semicon-storage.com/ap-en/semiconductor/product/image-recognition-processors-visconti.html
>
>
> dt-bindings: media: platform: visconti: Add Toshiba Visconti Video Input Interface bindings
> v1 -> v2:
> - No update
>
> media: platform: visconti: Add Toshiba Visconti Video Input Interface driver headers
> v1 -> v2:
> - moved driver headers to an individual patch
>
> media: platform: visconti: Add Toshiba Visconti Video Input Interface driver body
> v1 -> v2:
> - moved driver sources to an individual patch
>
> media: platform: visconti: Add Toshiba VIIF image signal processor driver
> v1 -> v2:
> - moved image signal processor driver to an individual patch
>
> MAINTAINERS: Add entries for Toshiba Visconti Video Input Interface
> v1 -> v2:
> - No update
>
> Change in V2:
> - moved files into individual patches to decrease patch size
Thank you for your patch series.
However, there are quite a few things that need more work. I'll make some
high level guidelines here, and go into a bit more detail in some of the
patches.
First of all, run your patches through 'scripts/checkpatch.pl --strict' and
fix the many warnings, errors and checks. Use common sense, sometimes a
check or warning isn't actually valid, but the vast majority of what
checkpatch spits out appears reasonable.
Another thing I noticed is code like this:
+ if (param->r_cr_in_offset > HWD_VIIF_CSC_MAX_OFFSET)
+ return -EINVAL;
+
+ if (param->g_y_in_offset > HWD_VIIF_CSC_MAX_OFFSET)
+ return -EINVAL;
+
+ if (param->b_cb_in_offset > HWD_VIIF_CSC_MAX_OFFSET)
+ return -EINVAL;
+
+ if (param->r_cr_out_offset > HWD_VIIF_CSC_MAX_OFFSET)
+ return -EINVAL;
+
+ if (param->g_y_out_offset > HWD_VIIF_CSC_MAX_OFFSET)
+ return -EINVAL;
+
+ if (param->b_cb_out_offset > HWD_VIIF_CSC_MAX_OFFSET)
+ return -EINVAL;
This can easily be combined into a single if:
if (param->r_cr_in_offset > HWD_VIIF_CSC_MAX_OFFSET ||
param->g_y_in_offset > HWD_VIIF_CSC_MAX_OFFSET ||
param->b_cb_in_offset > HWD_VIIF_CSC_MAX_OFFSET ||
param->r_cr_out_offset > HWD_VIIF_CSC_MAX_OFFSET ||
param->g_y_out_offset > HWD_VIIF_CSC_MAX_OFFSET ||
param->b_cb_out_offset > HWD_VIIF_CSC_MAX_OFFSET)
return -EINVAL;
Easier to read and a lot shorter.
Another thing to avoid is mixing lower and upper case in function names.
A lot of functions have this prefix: 'hwd_VIIF_'. Just change that to
'hwd_viif_': that's much easier on the eyes.
I also see a fair amount of code that is indented very far to the right.
Often due to constructs like this:
if (test) {
// lots of code
}
return ret;
Which can be changed to:
if (!test)
return ret;
// lots of code
return ret;
The same can also happen in a for/while loop where you can just 'continue'
instead of 'return'.
This makes the code easier to read and review.
It doesn't look like this driver uses the media controller API. This is
probably something you want to look into, esp. in combination with libcamera
support (https://libcamera.org/). I've added Laurent to this, since he's
the expert on this.
Regards,
Hans
>
> Yuji Ishikawa (5):
> dt-bindings: media: platform: visconti: Add Toshiba Visconti Video
> Input Interface bindings
> media: platform: visconti: Add Toshiba Visconti Video Input Interface
> driver headers
> media: platform: visconti: Add Toshiba Visconti Video Input Interface
> driver body
> media: platform: visconti: Add Toshiba VIIF image signal processor
> driver
> MAINTAINERS: Add entries for Toshiba Visconti Video Input Interface
>
> .../bindings/media/toshiba,visconti-viif.yaml | 103 +
> MAINTAINERS | 2 +
> drivers/media/platform/Kconfig | 2 +
> drivers/media/platform/Makefile | 4 +
> drivers/media/platform/visconti/Kconfig | 9 +
> drivers/media/platform/visconti/Makefile | 9 +
> drivers/media/platform/visconti/hwd_viif.c | 2233 ++++++++++
> drivers/media/platform/visconti/hwd_viif.h | 1776 ++++++++
> .../media/platform/visconti/hwd_viif_csi2rx.c | 767 ++++
> .../platform/visconti/hwd_viif_internal.h | 361 ++
> .../media/platform/visconti/hwd_viif_l1isp.c | 3769 +++++++++++++++++
> .../media/platform/visconti/hwd_viif_reg.h | 2802 ++++++++++++
> drivers/media/platform/visconti/viif.c | 2384 +++++++++++
> drivers/media/platform/visconti/viif.h | 134 +
> include/uapi/linux/visconti_viif.h | 1683 ++++++++
> 15 files changed, 16038 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/toshiba,visconti-viif.yaml
> create mode 100644 drivers/media/platform/visconti/Kconfig
> create mode 100644 drivers/media/platform/visconti/Makefile
> create mode 100644 drivers/media/platform/visconti/hwd_viif.c
> create mode 100644 drivers/media/platform/visconti/hwd_viif.h
> create mode 100644 drivers/media/platform/visconti/hwd_viif_csi2rx.c
> create mode 100644 drivers/media/platform/visconti/hwd_viif_internal.h
> create mode 100644 drivers/media/platform/visconti/hwd_viif_l1isp.c
> create mode 100644 drivers/media/platform/visconti/hwd_viif_reg.h
> create mode 100644 drivers/media/platform/visconti/viif.c
> create mode 100644 drivers/media/platform/visconti/viif.h
> create mode 100644 include/uapi/linux/visconti_viif.h
>
Powered by blists - more mailing lists