[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220421170725.903361-5-jose.exposito89@gmail.com>
Date: Thu, 21 Apr 2022 19:07:24 +0200
From: José Expósito <jose.exposito89@...il.com>
To: inki.dae@...sung.com
Cc: jy0922.shim@...sung.com, sw0312.kim@...sung.com,
kyungmin.park@...sung.com, airlied@...ux.ie, daniel@...ll.ch,
krzk@...nel.org, alim.akhtar@...sung.com, lgirdwood@...il.com,
broonie@...nel.org, dri-devel@...ts.freedesktop.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-kernel@...r.kernel.org,
hjc@...k-chips.com, heiko@...ech.de,
linux-rockchip@...ts.infradead.org, alain.volmat@...s.st.com,
p.zabel@...gutronix.de, mripard@...nel.org, wens@...e.org,
jernej.skrabec@...il.com, samuel@...lland.org,
linux-sunxi@...ts.linux.dev, laurent.pinchart@...asonboard.com,
José Expósito <jose.exposito89@...il.com>
Subject: [PATCH 4/5] drm/sti/sti_hdmi: Replace drm_detect_hdmi_monitor() with is_hdmi
Once EDID is parsed, the monitor HDMI support information is available
through drm_display_info.is_hdmi.
This driver calls drm_detect_hdmi_monitor() to receive the same
information and stores its own cached value, which is less efficient.
Avoid calling drm_detect_hdmi_monitor() and use drm_display_info.is_hdmi
instead and also remove sti_hdmi.hdmi_monitor as it is no longer
necessary.
Signed-off-by: José Expósito <jose.exposito89@...il.com>
---
drivers/gpu/drm/sti/sti_hdmi.c | 7 ++++---
drivers/gpu/drm/sti/sti_hdmi.h | 2 --
2 files changed, 4 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/sti/sti_hdmi.c b/drivers/gpu/drm/sti/sti_hdmi.c
index f3ace11209dd..93841ba907a8 100644
--- a/drivers/gpu/drm/sti/sti_hdmi.c
+++ b/drivers/gpu/drm/sti/sti_hdmi.c
@@ -266,6 +266,7 @@ static void hdmi_active_area(struct sti_hdmi *hdmi)
static void hdmi_config(struct sti_hdmi *hdmi)
{
u32 conf;
+ struct drm_display_info *display = &hdmi->drm_connector->display_info;
DRM_DEBUG_DRIVER("\n");
@@ -274,7 +275,7 @@ static void hdmi_config(struct sti_hdmi *hdmi)
/* Select encryption type and the framing mode */
conf |= HDMI_CFG_ESS_NOT_OESS;
- if (hdmi->hdmi_monitor)
+ if (display->is_hdmi)
conf |= HDMI_CFG_HDMI_NOT_DVI;
/* Set Hsync polarity */
@@ -984,9 +985,9 @@ static int sti_hdmi_connector_get_modes(struct drm_connector *connector)
if (!edid)
goto fail;
- hdmi->hdmi_monitor = drm_detect_hdmi_monitor(edid);
DRM_DEBUG_KMS("%s : %dx%d cm\n",
- (hdmi->hdmi_monitor ? "hdmi monitor" : "dvi monitor"),
+ (connector->display_info.is_hdmi ? "hdmi monitor" :
+ "dvi monitor"),
edid->width_cm, edid->height_cm);
cec_notifier_set_phys_addr_from_edid(hdmi->notifier, edid);
diff --git a/drivers/gpu/drm/sti/sti_hdmi.h b/drivers/gpu/drm/sti/sti_hdmi.h
index 05b2f3d0d48d..6d4c3f57bc46 100644
--- a/drivers/gpu/drm/sti/sti_hdmi.h
+++ b/drivers/gpu/drm/sti/sti_hdmi.h
@@ -57,7 +57,6 @@ struct hdmi_audio_params {
* @reset: reset control of the hdmi phy
* @ddc_adapt: i2c ddc adapter
* @colorspace: current colorspace selected
- * @hdmi_monitor: true if HDMI monitor detected else DVI monitor assumed
* @audio_pdev: ASoC hdmi-codec platform device
* @audio: hdmi audio parameters.
* @drm_connector: hdmi connector
@@ -83,7 +82,6 @@ struct sti_hdmi {
struct reset_control *reset;
struct i2c_adapter *ddc_adapt;
enum hdmi_colorspace colorspace;
- bool hdmi_monitor;
struct platform_device *audio_pdev;
struct hdmi_audio_params audio;
struct drm_connector *drm_connector;
--
2.25.1
Powered by blists - more mailing lists