Message-ID: <CAAPL-u_pSWD6U0yQ8Ws+_Yfb_3ZEmNXJsYcRJjAFBkyDk=nq8g@mail.gmail.com>
Date:   Wed, 20 Apr 2022 23:49:31 -0700
From:   Wei Xu <weixugc@...gle.com>
To:     "ying.huang@...el.com" <ying.huang@...el.com>
Cc:     Yang Shi <shy828301@...il.com>,
        Jagdish Gediya <jvgediya@...ux.ibm.com>,
        Linux MM <linux-mm@...ck.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Andrew Morton <akpm@...ux-foundation.org>,
        "Aneesh Kumar K.V" <aneesh.kumar@...ux.ibm.com>,
        Baolin Wang <baolin.wang@...ux.alibaba.com>,
        Dave Hansen <dave.hansen@...ux.intel.com>,
        Dan Williams <dan.j.williams@...el.com>,
        Greg Thelen <gthelen@...gle.com>
Subject: Re: [PATCH v2 0/5] mm: demotion: Introduce new node state N_DEMOTION_TARGETS

On Wed, Apr 20, 2022 at 11:24 PM ying.huang@...el.com
<ying.huang@...el.com> wrote:
>
> On Wed, 2022-04-20 at 22:41 -0700, Wei Xu wrote:
> > On Wed, Apr 20, 2022 at 8:12 PM Yang Shi <shy828301@...il.com> wrote:
> > >
> > > On Thu, Apr 14, 2022 at 12:00 AM ying.huang@...el.com
> > > <ying.huang@...el.com> wrote:
> > > >
> > > > On Wed, 2022-04-13 at 14:52 +0530, Jagdish Gediya wrote:
> > > > > Current implementation to find the demotion targets works
> > > > > based on node state N_MEMORY, however some systems may have
> > > > > dram only memory numa node which are N_MEMORY but not the
> > > > > right choices as demotion targets.
> > > > >
> > > > > This patch series introduces the new node state
> > > > > N_DEMOTION_TARGETS, which is used to distinguish the nodes which
> > > > > can be used as demotion targets, node_states[N_DEMOTION_TARGETS]
> > > > > is used to hold the list of nodes which can be used as demotion
> > > > > targets, support is also added to set the demotion target
> > > > > list from user space so that default behavior can be overridden.
> > > >
> > > > It appears that your proposed user space interface cannot solve all
> > > > problems.  For example, for system as follows,
> > > >
> > > > Node 0 & 2 are cpu + dram nodes and node 1 are slow memory node near
> > > > node 0,
> > > >
> > > > available: 3 nodes (0-2)
> > > > node 0 cpus: 0 1
> > > > node 0 size: n MB
> > > > node 0 free: n MB
> > > > node 1 cpus:
> > > > node 1 size: n MB
> > > > node 1 free: n MB
> > > > node 2 cpus: 2 3
> > > > node 2 size: n MB
> > > > node 2 free: n MB
> > > > node distances:
> > > > node   0   1   2
> > > >   0:  10  40  20
> > > >   1:  40  10  80
> > > >   2:  20  80  10
> > > >
> > > > Demotion order 1:
> > > >
> > > > node    demotion_target
> > > >  0              1
> > > >  1              X
> > > >  2              X
> > > >
> > > > Demotion order 2:
> > > >
> > > > node    demotion_target
> > > >  0              1
> > > >  1              X
> > > >  2              1
> > > >
> > > > The demotion order 1 is preferred if we want to reduce cross-socket
> > > > traffic.  While the demotion order 2 is preferred if we want to take
> > > > full advantage of the slow memory node.  We can take any choice as
> > > > automatic-generated order, while make the other choice possible via user
> > > > space overridden.
> > > >
> > > > I don't know how to implement this via your proposed user space
> > > > interface.  How about the following user space interface?
> > > >
> > > > 1. Add a file "demotion_order_override" in
> > > >         /sys/devices/system/node/
> > > >
> > > > 2. When read, "1" is output if the demotion order of the system has been
> > > > overridden; "0" is output if not.
> > > >
> > > > 3. When write "1", the demotion order of the system will become the
> > > > overridden mode.  When write "0", the demotion order of the system will
> > > > become the automatic mode and the demotion order will be re-generated.
> > > >
> > > > 4. Add a file "demotion_targets" for each node in
> > > >         /sys/devices/system/node/nodeX/
> > > >
> > > > 5. When read, the demotion targets of nodeX will be output.
> > > >
> > > > 6. When write a node list to the file, the demotion targets of nodeX
> > > > will be set to the written nodes.  And the demotion order of the system
> > > > will become the overridden mode.
> > >
> > > TBH I don't think having override demotion targets in userspace is
> > > quite useful in real life for now (it might become useful in the
> > > future, I can't tell). Imagine you manage hundred thousands of
> > > machines, which may come from different vendors, have different
> > > generations of hardware, have different versions of firmware, it would
> > > be a nightmare for the users to configure the demotion targets
> > > properly. So it would be great to have the kernel properly configure
> > > it *without* intervening from the users.
> > >
> > > So we should pick up a proper default policy and stick with that
> > > policy unless it doesn't work well for the most workloads. I do
> > > understand it is hard to make everyone happy. My proposal is having
> > > every node in the fast tier has a demotion target (at least one) if
> > > the slow tier exists sounds like a reasonable default policy. I think
> > > this is also the current implementation.
> > >
> >
> > This is reasonable.  I agree that with a decent default policy,
> >
>
> I agree that a decent default policy is important.  As that was enhanced
> in [1/5] of this patchset.
>
> > the
> > overriding of per-node demotion targets can be deferred.  The most
> > important problem here is that we should allow the configurations
> > where memory-only nodes are not used as demotion targets, which this
> > patch set has already addressed.
>
> Do you mean the user space interface proposed by [3/5] of this patchset?

Yes.

> IMHO, if we want to add a user space interface, I think that it should
> be powerful enough to address all existing issues and some potential
> future issues, so that it can be stable.  I don't think it's a good idea
> to define a partial user space interface that works only for a specific
> use case and cannot be extended for other use cases.

I actually think that they can be viewed as two separate problems: one
is to define which nodes can be used as demotion targets (this patch
set), and the other is how to initialize the per-node demotion path
(node_demotion[]).  We don't have to solve both problems at the same
time.

If we decide to go with a per-node demotion path customization
interface to indirectly set N_DEMOTION_TARGETS, I'd prefer that there
is a single global control to turn off all demotion targets (for the
machines that don't use memory-only nodes for demotion).

> Best Regards,
> Huang, Ying
>
> [snip]
>
> > >
>
>

Powered by blists - more mailing lists