linux-kernel - Re: [PATCH] irqchip/armada-370-xp: Enable MSI affinity configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <87mtgfgx7d.wl-maz@kernel.org>
Date:   Thu, 21 Apr 2022 00:19:02 +0100
From:   Marc Zyngier <maz@...nel.org>
To:     Nathan Rossi <nathan@...hanrossi.com>
Cc:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Nathan Rossi <nathan.rossi@...i.com>,
        Andrew Lunn <andrew@...n.ch>,
        Gregory Clement <gregory.clement@...tlin.com>,
        Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
        Thomas Gleixner <tglx@...utronix.de>
Subject: Re: [PATCH] irqchip/armada-370-xp: Enable MSI affinity configuration

Hi Nathan,

On Thu, 21 Apr 2022 02:57:28 +0100,
Nathan Rossi <nathan@...hanrossi.com> wrote:
> 
> From: Nathan Rossi <nathan.rossi@...i.com>
> 
> With multiple devices attached via PCIe to an Armada 385 it is possible
> to overwhelm a single CPU with MSI interrupts. Under certain scenarios
> configuring the interrupts to be handled by more than one CPU would
> prevent the system from being overwhelmed. However the
> irqchip-aramada-370-xp driver is configured to only handle MSIs on the
> boot CPU, and provides no affinity configuration.
> 
> This change adds support to the armada-370-xp driver to allow for
> configuring the affinity of specific MSI irqs and to generate the
> interrupts on secondary CPUs. This is done by enabling the private
> doorbell for all online CPUs and configures all CPUs to unmask MSI
> specific private doorbell bits. The CPU affinity selection of the
> interrupt is handled by the target list of the software triggered
> interrupt value, which is provided as the MSI message. The message has
> the associated CPU bit set for the target CPU. For private doorbell
> interrupts only one bit can be set otherwise all CPUs will receive the
> interrupt, so the lowest CPU in the affinity mask is used. This means
> that by default the first CPU will handle all the interrupts as was the
> case before.
> 
> Signed-off-by: Nathan Rossi <nathan.rossi@...i.com>
> ---
>  drivers/irqchip/irq-armada-370-xp.c | 34 ++++++++++++++++++++++++++++++++--
>  1 file changed, 32 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
> index 5b8d571c04..42c257f576 100644
> --- a/drivers/irqchip/irq-armada-370-xp.c
> +++ b/drivers/irqchip/irq-armada-370-xp.c
> @@ -209,15 +209,37 @@ static struct msi_domain_info armada_370_xp_msi_domain_info = {
>  
>  static void armada_370_xp_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
>  {
> +#ifdef CONFIG_SMP
> +	unsigned int cpu = cpumask_first(irq_data_get_effective_affinity_mask(data));
> +
> +	msg->data = (1 << (cpu + 8)) | (data->hwirq + PCI_MSI_DOORBELL_START);

BIT(cpu + 8) | ...

> +#else
> +	msg->data = 0xf00 | (data->hwirq + PCI_MSI_DOORBELL_START);

This paints the existing code a bit differently. This seems to target
all 4 CPUs. Why is that? I'd expect only bit 8 to be set, and the
whole #ifdefery to go away.

> +#endif
>  	msg->address_lo = lower_32_bits(msi_doorbell_addr);
>  	msg->address_hi = upper_32_bits(msi_doorbell_addr);
> -	msg->data = 0xf00 | (data->hwirq + PCI_MSI_DOORBELL_START);
>  }
>  
>  static int armada_370_xp_msi_set_affinity(struct irq_data *irq_data,
>  					  const struct cpumask *mask, bool force)
>  {
> -	 return -EINVAL;
> +#ifdef CONFIG_SMP
> +	unsigned int cpu;
> +
> +	if (!force)
> +		cpu = cpumask_any_and(mask, cpu_online_mask);
> +	else
> +		cpu = cpumask_first(mask);
> +
> +	if (cpu >= nr_cpu_ids)
> +		return -EINVAL;
> +
> +	irq_data_update_effective_affinity(irq_data, cpumask_of(cpu));
> +
> +	return IRQ_SET_MASK_OK;
> +#else
> +	return -EINVAL;
> +#endif
>  }
>  
>  static struct irq_chip armada_370_xp_msi_bottom_irq_chip = {
> @@ -482,6 +504,7 @@ static void armada_xp_mpic_smp_cpu_init(void)
>  static void armada_xp_mpic_reenable_percpu(void)
>  {
>  	unsigned int irq;
> +	u32 reg;
>  
>  	/* Re-enable per-CPU interrupts that were enabled before suspend */
>  	for (irq = 0; irq < ARMADA_370_XP_MAX_PER_CPU_IRQS; irq++) {
> @@ -501,6 +524,13 @@ static void armada_xp_mpic_reenable_percpu(void)
>  	}
>  
>  	ipi_resume();
> +
> +	/* Enable MSI doorbell mask and combined cpu local interrupt */
> +	reg = readl(per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_MSK_OFFS)
> +		| PCI_MSI_DOORBELL_MASK;
> +	writel(reg, per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
> +	/* Unmask local doorbell interrupt */
> +	writel(1, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);

This is a duplicate of what is already in armada_370_xp_msi_init().
Please refactor it so that this doesn't happen twice on the first CPU.

This otherwise seem like a valuable improvement on the current
behaviour,

	M.

-- 
Without deviation from the norm, progress is not possible.