| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 21 Apr 2022 10:58:03 +0200
From: Jiri Slaby <jslaby@...e.cz>
To: gregkh@...uxfoundation.org
Cc: linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
Jiri Slaby <jslaby@...e.cz>
Subject: [PATCH 05/10] serial: icom: move header content to .c
There is no point keeping the header content separated. The header was
not even protected against double inclusion. So move the content to the
appropriate source file.
Signed-off-by: Jiri Slaby <jslaby@...e.cz>
---
drivers/tty/serial/icom.c | 267 ++++++++++++++++++++++++++++++++++++-
drivers/tty/serial/icom.h | 274 --------------------------------------
2 files changed, 265 insertions(+), 276 deletions(-)
delete mode 100644 drivers/tty/serial/icom.h
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index e1f9d42180ff..083c00aced07 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -19,6 +19,7 @@
#include <linux/fs.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
+#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/major.h>
#include <linux/string.h>
@@ -41,13 +42,275 @@
#include <asm/irq.h>
#include <linux/uaccess.h>
-#include "icom.h"
-
/*#define ICOM_TRACE enable port trace capabilities */
#define ICOM_DRIVER_NAME "icom"
#define NR_PORTS 128
+#define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1)
+static int icom_acfg_baud[] = {
+ 300,
+ 600,
+ 900,
+ 1200,
+ 1800,
+ 2400,
+ 3600,
+ 4800,
+ 7200,
+ 9600,
+ 14400,
+ 19200,
+ 28800,
+ 38400,
+ 57600,
+ 76800,
+ 115200,
+ 153600,
+ 230400,
+ 307200,
+ 460800,
+};
+
+struct icom_regs {
+ u32 control; /* Adapter Control Register */
+ u32 interrupt; /* Adapter Interrupt Register */
+ u32 int_mask; /* Adapter Interrupt Mask Reg */
+ u32 int_pri; /* Adapter Interrupt Priority r */
+ u32 int_reg_b; /* Adapter non-masked Interrupt */
+ u32 resvd01;
+ u32 resvd02;
+ u32 resvd03;
+ u32 control_2; /* Adapter Control Register 2 */
+ u32 interrupt_2; /* Adapter Interrupt Register 2 */
+ u32 int_mask_2; /* Adapter Interrupt Mask 2 */
+ u32 int_pri_2; /* Adapter Interrupt Prior 2 */
+ u32 int_reg_2b; /* Adapter non-masked 2 */
+};
+
+struct func_dram {
+ u32 reserved[108]; /* 0-1B0 reserved by personality code */
+ u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */
+ u8 RcvStnAddr; /* 1B4 Receive Station Addr */
+ u8 IdleState; /* 1B5 Idle State */
+ u8 IdleMonitor; /* 1B6 Idle Monitor */
+ u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */
+ u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */
+ u8 StartXmitCmd; /* 1BC Start Xmit Command */
+ u8 HDLCConfigReg; /* 1BD Reserved */
+ u8 CauseCode; /* 1BE Cause code for fatal error */
+ u8 xchar; /* 1BF High priority send */
+ u32 reserved3; /* 1C0-1C3 Reserved */
+ u8 PrevCmdReg; /* 1C4 Reserved */
+ u8 CmdReg; /* 1C5 Command Register */
+ u8 async_config2; /* 1C6 Async Config Byte 2 */
+ u8 async_config3; /* 1C7 Async Config Byte 3 */
+ u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */
+ u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */
+ u8 misc_flags; /* 1DD misc flags */
+#define V2_HARDWARE 0x40
+#define ICOM_HDW_ACTIVE 0x01
+ u8 call_length; /* 1DE Phone #/CFI buff ln */
+ u8 call_length2; /* 1DF Upper byte (unused) */
+ u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */
+ u16 timer_value; /* 1E4-1E5 general timer value */
+ u8 timer_command; /* 1E6 general timer cmd */
+ u8 dce_command; /* 1E7 dce command reg */
+ u8 dce_cmd_status; /* 1E8 dce command stat */
+ u8 x21_r1_ioff; /* 1E9 dce ready counter */
+ u8 x21_r0_ioff; /* 1EA dce not ready ctr */
+ u8 x21_ralt_ioff; /* 1EB dce CNR counter */
+ u8 x21_r1_ion; /* 1EC dce ready I on ctr */
+ u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */
+ u8 ier; /* 1EE Interrupt Enable */
+ u8 isr; /* 1EF Input Signal Reg */
+ u8 osr; /* 1F0 Output Signal Reg */
+ u8 reset; /* 1F1 Reset/Reload Reg */
+ u8 disable; /* 1F2 Disable Reg */
+ u8 sync; /* 1F3 Sync Reg */
+ u8 error_stat; /* 1F4 Error Status */
+ u8 cable_id; /* 1F5 Cable ID */
+ u8 cs_length; /* 1F6 CS Load Length */
+ u8 mac_length; /* 1F7 Mac Load Length */
+ u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */
+ u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */
+};
+
+/*
+ * adapter defines and structures
+ */
+#define ICOM_CONTROL_START_A 0x00000008
+#define ICOM_CONTROL_STOP_A 0x00000004
+#define ICOM_CONTROL_START_B 0x00000002
+#define ICOM_CONTROL_STOP_B 0x00000001
+#define ICOM_CONTROL_START_C 0x00000008
+#define ICOM_CONTROL_STOP_C 0x00000004
+#define ICOM_CONTROL_START_D 0x00000002
+#define ICOM_CONTROL_STOP_D 0x00000001
+#define ICOM_IRAM_OFFSET 0x1000
+#define ICOM_IRAM_SIZE 0x0C00
+#define ICOM_DCE_IRAM_OFFSET 0x0A00
+#define ICOM_CABLE_ID_VALID 0x01
+#define ICOM_CABLE_ID_MASK 0xF0
+#define ICOM_DISABLE 0x80
+#define CMD_XMIT_RCV_ENABLE 0xC0
+#define CMD_XMIT_ENABLE 0x40
+#define CMD_RCV_DISABLE 0x00
+#define CMD_RCV_ENABLE 0x80
+#define CMD_RESTART 0x01
+#define CMD_HOLD_XMIT 0x02
+#define CMD_SND_BREAK 0x04
+#define RS232_CABLE 0x06
+#define V24_CABLE 0x0E
+#define V35_CABLE 0x0C
+#define V36_CABLE 0x02
+#define NO_CABLE 0x00
+#define START_DOWNLOAD 0x80
+#define ICOM_INT_MASK_PRC_A 0x00003FFF
+#define ICOM_INT_MASK_PRC_B 0x3FFF0000
+#define ICOM_INT_MASK_PRC_C 0x00003FFF
+#define ICOM_INT_MASK_PRC_D 0x3FFF0000
+#define INT_RCV_COMPLETED 0x1000
+#define INT_XMIT_COMPLETED 0x2000
+#define INT_IDLE_DETECT 0x0800
+#define INT_RCV_DISABLED 0x0400
+#define INT_XMIT_DISABLED 0x0200
+#define INT_RCV_XMIT_SHUTDOWN 0x0100
+#define INT_FATAL_ERROR 0x0080
+#define INT_CABLE_PULL 0x0020
+#define INT_SIGNAL_CHANGE 0x0010
+#define HDLC_PPP_PURE_ASYNC 0x02
+#define HDLC_FF_FILL 0x00
+#define HDLC_HDW_FLOW 0x01
+#define START_XMIT 0x80
+#define ICOM_ACFG_DRIVE1 0x20
+#define ICOM_ACFG_NO_PARITY 0x00
+#define ICOM_ACFG_PARITY_ENAB 0x02
+#define ICOM_ACFG_PARITY_ODD 0x01
+#define ICOM_ACFG_8BPC 0x00
+#define ICOM_ACFG_7BPC 0x04
+#define ICOM_ACFG_6BPC 0x08
+#define ICOM_ACFG_5BPC 0x0C
+#define ICOM_ACFG_1STOP_BIT 0x00
+#define ICOM_ACFG_2STOP_BIT 0x10
+#define ICOM_DTR 0x80
+#define ICOM_RTS 0x40
+#define ICOM_RI 0x08
+#define ICOM_DSR 0x80
+#define ICOM_DCD 0x20
+#define ICOM_CTS 0x40
+
+#define NUM_XBUFFS 1
+#define NUM_RBUFFS 2
+#define RCV_BUFF_SZ 0x0200
+#define XMIT_BUFF_SZ 0x1000
+struct statusArea {
+ /**********************************************/
+ /* Transmit Status Area */
+ /**********************************************/
+ struct xmit_status_area{
+ __le32 leNext; /* Next entry in Little Endian on Adapter */
+ __le32 leNextASD;
+ __le32 leBuffer; /* Buffer for entry in LE for Adapter */
+ __le16 leLengthASD;
+ __le16 leOffsetASD;
+ __le16 leLength; /* Length of data in segment */
+ __le16 flags;
+#define SA_FLAGS_DONE 0x0080 /* Done with Segment */
+#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */
+#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */
+#define SA_FLAGS_READY_TO_XMIT 0x0800
+#define SA_FLAGS_STAT_MASK 0x007F
+ } xmit[NUM_XBUFFS];
+
+ /**********************************************/
+ /* Receive Status Area */
+ /**********************************************/
+ struct {
+ __le32 leNext; /* Next entry in Little Endian on Adapter */
+ __le32 leNextASD;
+ __le32 leBuffer; /* Buffer for entry in LE for Adapter */
+ __le16 WorkingLength; /* size of segment */
+ __le16 reserv01;
+ __le16 leLength; /* Length of data in segment */
+ __le16 flags;
+#define SA_FL_RCV_DONE 0x0010 /* Data ready */
+#define SA_FLAGS_OVERRUN 0x0040
+#define SA_FLAGS_PARITY_ERROR 0x0080
+#define SA_FLAGS_FRAME_ERROR 0x0001
+#define SA_FLAGS_FRAME_TRUNC 0x0002
+#define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */
+#define SA_FLAGS_RCV_MASK 0xFFE6
+ } rcv[NUM_RBUFFS];
+};
+
+struct icom_adapter;
+
+
+#define ICOM_MAJOR 243
+#define ICOM_MINOR_START 0
+
+struct icom_port {
+ struct uart_port uart_port;
+ u8 imbed_modem;
+#define ICOM_UNKNOWN 1
+#define ICOM_RVX 2
+#define ICOM_IMBED_MODEM 3
+ unsigned char cable_id;
+ unsigned char read_status_mask;
+ unsigned char ignore_status_mask;
+ void __iomem * int_reg;
+ struct icom_regs __iomem *global_reg;
+ struct func_dram __iomem *dram;
+ int port;
+ struct statusArea *statStg;
+ dma_addr_t statStg_pci;
+ __le32 *xmitRestart;
+ dma_addr_t xmitRestart_pci;
+ unsigned char *xmit_buf;
+ dma_addr_t xmit_buf_pci;
+ unsigned char *recv_buf;
+ dma_addr_t recv_buf_pci;
+ int next_rcv;
+ int put_length;
+ int status;
+#define ICOM_PORT_ACTIVE 1 /* Port exists. */
+#define ICOM_PORT_OFF 0 /* Port does not exist. */
+ int load_in_progress;
+ struct icom_adapter *adapter;
+};
+
+struct icom_adapter {
+ void __iomem * base_addr;
+ unsigned long base_addr_pci;
+ struct pci_dev *pci_dev;
+ struct icom_port port_info[4];
+ int index;
+ int version;
+#define ADAPTER_V1 0x0001
+#define ADAPTER_V2 0x0002
+ u32 subsystem_id;
+#define FOUR_PORT_MODEL 0x0252
+#define V2_TWO_PORTS_RVX 0x021A
+#define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251
+ int numb_ports;
+ struct list_head icom_adapter_entry;
+ struct kref kref;
+};
+
+/* prototype */
+extern void iCom_sercons_init(void);
+
+struct lookup_proc_table {
+ u32 __iomem *global_control_reg;
+ unsigned long processor_id;
+};
+
+struct lookup_int_table {
+ u32 __iomem *global_int_mask;
+ unsigned long processor_id;
+};
+
static inline struct icom_port *to_icom_port(struct uart_port *port)
{
return container_of(port, struct icom_port, uart_port);
diff --git a/drivers/tty/serial/icom.h b/drivers/tty/serial/icom.h
deleted file mode 100644
index 62d5ba81dcfc..000000000000
--- a/drivers/tty/serial/icom.h
+++ /dev/null
@@ -1,274 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * icom.h
- *
- * Copyright (C) 2001 Michael Anderson, IBM Corporation
- *
- * Serial device driver include file.
- */
-
-#include <linux/serial_core.h>
-
-#define BAUD_TABLE_LIMIT ((sizeof(icom_acfg_baud)/sizeof(int)) - 1)
-static int icom_acfg_baud[] = {
- 300,
- 600,
- 900,
- 1200,
- 1800,
- 2400,
- 3600,
- 4800,
- 7200,
- 9600,
- 14400,
- 19200,
- 28800,
- 38400,
- 57600,
- 76800,
- 115200,
- 153600,
- 230400,
- 307200,
- 460800,
-};
-
-struct icom_regs {
- u32 control; /* Adapter Control Register */
- u32 interrupt; /* Adapter Interrupt Register */
- u32 int_mask; /* Adapter Interrupt Mask Reg */
- u32 int_pri; /* Adapter Interrupt Priority r */
- u32 int_reg_b; /* Adapter non-masked Interrupt */
- u32 resvd01;
- u32 resvd02;
- u32 resvd03;
- u32 control_2; /* Adapter Control Register 2 */
- u32 interrupt_2; /* Adapter Interrupt Register 2 */
- u32 int_mask_2; /* Adapter Interrupt Mask 2 */
- u32 int_pri_2; /* Adapter Interrupt Prior 2 */
- u32 int_reg_2b; /* Adapter non-masked 2 */
-};
-
-struct func_dram {
- u32 reserved[108]; /* 0-1B0 reserved by personality code */
- u32 RcvStatusAddr; /* 1B0-1B3 Status Address for Next rcv */
- u8 RcvStnAddr; /* 1B4 Receive Station Addr */
- u8 IdleState; /* 1B5 Idle State */
- u8 IdleMonitor; /* 1B6 Idle Monitor */
- u8 FlagFillIdleTimer; /* 1B7 Flag Fill Idle Timer */
- u32 XmitStatusAddr; /* 1B8-1BB Transmit Status Address */
- u8 StartXmitCmd; /* 1BC Start Xmit Command */
- u8 HDLCConfigReg; /* 1BD Reserved */
- u8 CauseCode; /* 1BE Cause code for fatal error */
- u8 xchar; /* 1BF High priority send */
- u32 reserved3; /* 1C0-1C3 Reserved */
- u8 PrevCmdReg; /* 1C4 Reserved */
- u8 CmdReg; /* 1C5 Command Register */
- u8 async_config2; /* 1C6 Async Config Byte 2 */
- u8 async_config3; /* 1C7 Async Config Byte 3 */
- u8 dce_resvd[20]; /* 1C8-1DB DCE Rsvd */
- u8 dce_resvd21; /* 1DC DCE Rsvd (21st byte */
- u8 misc_flags; /* 1DD misc flags */
-#define V2_HARDWARE 0x40
-#define ICOM_HDW_ACTIVE 0x01
- u8 call_length; /* 1DE Phone #/CFI buff ln */
- u8 call_length2; /* 1DF Upper byte (unused) */
- u32 call_addr; /* 1E0-1E3 Phn #/CFI buff addr */
- u16 timer_value; /* 1E4-1E5 general timer value */
- u8 timer_command; /* 1E6 general timer cmd */
- u8 dce_command; /* 1E7 dce command reg */
- u8 dce_cmd_status; /* 1E8 dce command stat */
- u8 x21_r1_ioff; /* 1E9 dce ready counter */
- u8 x21_r0_ioff; /* 1EA dce not ready ctr */
- u8 x21_ralt_ioff; /* 1EB dce CNR counter */
- u8 x21_r1_ion; /* 1EC dce ready I on ctr */
- u8 rsvd_ier; /* 1ED Rsvd for IER (if ne */
- u8 ier; /* 1EE Interrupt Enable */
- u8 isr; /* 1EF Input Signal Reg */
- u8 osr; /* 1F0 Output Signal Reg */
- u8 reset; /* 1F1 Reset/Reload Reg */
- u8 disable; /* 1F2 Disable Reg */
- u8 sync; /* 1F3 Sync Reg */
- u8 error_stat; /* 1F4 Error Status */
- u8 cable_id; /* 1F5 Cable ID */
- u8 cs_length; /* 1F6 CS Load Length */
- u8 mac_length; /* 1F7 Mac Load Length */
- u32 cs_load_addr; /* 1F8-1FB Call Load PCI Addr */
- u32 mac_load_addr; /* 1FC-1FF Mac Load PCI Addr */
-};
-
-/*
- * adapter defines and structures
- */
-#define ICOM_CONTROL_START_A 0x00000008
-#define ICOM_CONTROL_STOP_A 0x00000004
-#define ICOM_CONTROL_START_B 0x00000002
-#define ICOM_CONTROL_STOP_B 0x00000001
-#define ICOM_CONTROL_START_C 0x00000008
-#define ICOM_CONTROL_STOP_C 0x00000004
-#define ICOM_CONTROL_START_D 0x00000002
-#define ICOM_CONTROL_STOP_D 0x00000001
-#define ICOM_IRAM_OFFSET 0x1000
-#define ICOM_IRAM_SIZE 0x0C00
-#define ICOM_DCE_IRAM_OFFSET 0x0A00
-#define ICOM_CABLE_ID_VALID 0x01
-#define ICOM_CABLE_ID_MASK 0xF0
-#define ICOM_DISABLE 0x80
-#define CMD_XMIT_RCV_ENABLE 0xC0
-#define CMD_XMIT_ENABLE 0x40
-#define CMD_RCV_DISABLE 0x00
-#define CMD_RCV_ENABLE 0x80
-#define CMD_RESTART 0x01
-#define CMD_HOLD_XMIT 0x02
-#define CMD_SND_BREAK 0x04
-#define RS232_CABLE 0x06
-#define V24_CABLE 0x0E
-#define V35_CABLE 0x0C
-#define V36_CABLE 0x02
-#define NO_CABLE 0x00
-#define START_DOWNLOAD 0x80
-#define ICOM_INT_MASK_PRC_A 0x00003FFF
-#define ICOM_INT_MASK_PRC_B 0x3FFF0000
-#define ICOM_INT_MASK_PRC_C 0x00003FFF
-#define ICOM_INT_MASK_PRC_D 0x3FFF0000
-#define INT_RCV_COMPLETED 0x1000
-#define INT_XMIT_COMPLETED 0x2000
-#define INT_IDLE_DETECT 0x0800
-#define INT_RCV_DISABLED 0x0400
-#define INT_XMIT_DISABLED 0x0200
-#define INT_RCV_XMIT_SHUTDOWN 0x0100
-#define INT_FATAL_ERROR 0x0080
-#define INT_CABLE_PULL 0x0020
-#define INT_SIGNAL_CHANGE 0x0010
-#define HDLC_PPP_PURE_ASYNC 0x02
-#define HDLC_FF_FILL 0x00
-#define HDLC_HDW_FLOW 0x01
-#define START_XMIT 0x80
-#define ICOM_ACFG_DRIVE1 0x20
-#define ICOM_ACFG_NO_PARITY 0x00
-#define ICOM_ACFG_PARITY_ENAB 0x02
-#define ICOM_ACFG_PARITY_ODD 0x01
-#define ICOM_ACFG_8BPC 0x00
-#define ICOM_ACFG_7BPC 0x04
-#define ICOM_ACFG_6BPC 0x08
-#define ICOM_ACFG_5BPC 0x0C
-#define ICOM_ACFG_1STOP_BIT 0x00
-#define ICOM_ACFG_2STOP_BIT 0x10
-#define ICOM_DTR 0x80
-#define ICOM_RTS 0x40
-#define ICOM_RI 0x08
-#define ICOM_DSR 0x80
-#define ICOM_DCD 0x20
-#define ICOM_CTS 0x40
-
-#define NUM_XBUFFS 1
-#define NUM_RBUFFS 2
-#define RCV_BUFF_SZ 0x0200
-#define XMIT_BUFF_SZ 0x1000
-struct statusArea {
- /**********************************************/
- /* Transmit Status Area */
- /**********************************************/
- struct xmit_status_area{
- __le32 leNext; /* Next entry in Little Endian on Adapter */
- __le32 leNextASD;
- __le32 leBuffer; /* Buffer for entry in LE for Adapter */
- __le16 leLengthASD;
- __le16 leOffsetASD;
- __le16 leLength; /* Length of data in segment */
- __le16 flags;
-#define SA_FLAGS_DONE 0x0080 /* Done with Segment */
-#define SA_FLAGS_CONTINUED 0x8000 /* More Segments */
-#define SA_FLAGS_IDLE 0x4000 /* Mark IDLE after frm */
-#define SA_FLAGS_READY_TO_XMIT 0x0800
-#define SA_FLAGS_STAT_MASK 0x007F
- } xmit[NUM_XBUFFS];
-
- /**********************************************/
- /* Receive Status Area */
- /**********************************************/
- struct {
- __le32 leNext; /* Next entry in Little Endian on Adapter */
- __le32 leNextASD;
- __le32 leBuffer; /* Buffer for entry in LE for Adapter */
- __le16 WorkingLength; /* size of segment */
- __le16 reserv01;
- __le16 leLength; /* Length of data in segment */
- __le16 flags;
-#define SA_FL_RCV_DONE 0x0010 /* Data ready */
-#define SA_FLAGS_OVERRUN 0x0040
-#define SA_FLAGS_PARITY_ERROR 0x0080
-#define SA_FLAGS_FRAME_ERROR 0x0001
-#define SA_FLAGS_FRAME_TRUNC 0x0002
-#define SA_FLAGS_BREAK_DET 0x0004 /* set conditionally by device driver, not hardware */
-#define SA_FLAGS_RCV_MASK 0xFFE6
- } rcv[NUM_RBUFFS];
-};
-
-struct icom_adapter;
-
-
-#define ICOM_MAJOR 243
-#define ICOM_MINOR_START 0
-
-struct icom_port {
- struct uart_port uart_port;
- u8 imbed_modem;
-#define ICOM_UNKNOWN 1
-#define ICOM_RVX 2
-#define ICOM_IMBED_MODEM 3
- unsigned char cable_id;
- unsigned char read_status_mask;
- unsigned char ignore_status_mask;
- void __iomem * int_reg;
- struct icom_regs __iomem *global_reg;
- struct func_dram __iomem *dram;
- int port;
- struct statusArea *statStg;
- dma_addr_t statStg_pci;
- __le32 *xmitRestart;
- dma_addr_t xmitRestart_pci;
- unsigned char *xmit_buf;
- dma_addr_t xmit_buf_pci;
- unsigned char *recv_buf;
- dma_addr_t recv_buf_pci;
- int next_rcv;
- int put_length;
- int status;
-#define ICOM_PORT_ACTIVE 1 /* Port exists. */
-#define ICOM_PORT_OFF 0 /* Port does not exist. */
- int load_in_progress;
- struct icom_adapter *adapter;
-};
-
-struct icom_adapter {
- void __iomem * base_addr;
- unsigned long base_addr_pci;
- struct pci_dev *pci_dev;
- struct icom_port port_info[4];
- int index;
- int version;
-#define ADAPTER_V1 0x0001
-#define ADAPTER_V2 0x0002
- u32 subsystem_id;
-#define FOUR_PORT_MODEL 0x0252
-#define V2_TWO_PORTS_RVX 0x021A
-#define V2_ONE_PORT_RVX_ONE_PORT_IMBED_MDM 0x0251
- int numb_ports;
- struct list_head icom_adapter_entry;
- struct kref kref;
-};
-
-/* prototype */
-extern void iCom_sercons_init(void);
-
-struct lookup_proc_table {
- u32 __iomem *global_control_reg;
- unsigned long processor_id;
-};
-
-struct lookup_int_table {
- u32 __iomem *global_int_mask;
- unsigned long processor_id;
-};
--
2.36.0
Powered by blists - more mailing lists