[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20220422071025.5490-3-daniel.starke@siemens.com>
Date: Fri, 22 Apr 2022 00:10:25 -0700
From: "D. Starke" <daniel.starke@...mens.com>
To: linux-serial@...r.kernel.org, gregkh@...uxfoundation.org,
jirislaby@...nel.org
Cc: linux-kernel@...r.kernel.org,
Daniel Starke <daniel.starke@...mens.com>
Subject: [PATCH 3/3] tty: n_gsm: fix software flow control handling
From: Daniel Starke <daniel.starke@...mens.com>
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.8.1 states that XON/XOFF characters
shall be used instead of Fcon/Fcoff command in advanced option mode to
handle flow control. Chapter 5.4.8.2 describes how XON/XOFF characters
shall be handled. Basic option mode only used Fcon/Fcoff commands and no
XON/XOFF characters. These are treated as data bytes here.
The current implementation uses the gsm_mux field 'constipated' to handle
flow control from the remote peer and the gsm_dlci field 'constipated' to
handle flow control from each DLCI. The later is unrelated to this patch.
The gsm_mux field is correctly set for Fcon/Fcoff commands in
gsm_control_message(). However, the same is not true for XON/XOFF
characters in gsm1_receive().
Disable software flow control handling in the tty to allow explicit
handling by n_gsm.
Add the missing handling in advanced option mode for gsm_mux in
gsm1_receive() to comply with the standard.
This patch depends on the following commit:
Commit 8838b2af23ca ("tty: n_gsm: fix SW flow control encoding/handling")
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@...r.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@...mens.com>
---
drivers/tty/n_gsm.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 570f0b8b7576..8652308c187f 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -232,6 +232,7 @@ struct gsm_mux {
int initiator; /* Did we initiate connection */
bool dead; /* Has the mux been shut down */
struct gsm_dlci *dlci[NUM_DLCI];
+ int old_c_iflag; /* termios c_iflag value before attach */
bool constipated; /* Asked by remote to shut up */
spinlock_t tx_lock;
@@ -2022,6 +2023,16 @@ static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
{
+ /* handle XON/XOFF */
+ if ((c & ISO_IEC_646_MASK) == XON) {
+ gsm->constipated = true;
+ return;
+ } else if ((c & ISO_IEC_646_MASK) == XOFF) {
+ gsm->constipated = false;
+ /* Kick the link in case it is idling */
+ gsm_data_kick(gsm, NULL);
+ return;
+ }
if (c == GSM1_SOF) {
/* EOF is only valid in frame if we have got to the data state */
if (gsm->state == GSM_DATA) {
@@ -2449,6 +2460,9 @@ static int gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
int ret, i;
gsm->tty = tty_kref_get(tty);
+ /* Turn off tty XON/XOFF handling to handle it explicitly. */
+ gsm->old_c_iflag = tty->termios.c_iflag;
+ tty->termios.c_iflag &= (IXON | IXOFF);
ret = gsm_activate_mux(gsm);
if (ret != 0)
tty_kref_put(gsm->tty);
@@ -2489,6 +2503,8 @@ static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
WARN_ON(tty != gsm->tty);
for (i = 1; i < NUM_DLCI; i++)
tty_unregister_device(gsm_tty_driver, base + i);
+ /* Restore tty XON/XOFF handling. */
+ gsm->tty->termios.c_iflag = gsm->old_c_iflag;
tty_kref_put(gsm->tty);
gsm->tty = NULL;
}
--
2.25.1
Powered by blists - more mailing lists