linux-kernel - [PATCH v4] PCI: Make sure the bus bridge powered on when scanning bus

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220422080404.27724-1-yangyicong@hisilicon.com>
Date:   Fri, 22 Apr 2022 16:04:04 +0800
From:   Yicong Yang <yangyicong@...ilicon.com>
To:     <bhelgaas@...gle.com>, <rafael@...nel.org>,
        <linux-pci@...r.kernel.org>
CC:     <linux-kernel@...r.kernel.org>, <linuxarm@...wei.com>,
        <yangyicong@...ilicon.com>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>
Subject: [PATCH v4] PCI: Make sure the bus bridge powered on when scanning bus

When the bus bridge is runtime suspended, we'll fail to rescan
the devices through sysfs as we cannot access the configuration
space correctly when the bridge is in D3hot.
It can be reproduced like:

$ echo 1 > /sys/bus/pci/devices/0000:80:00.0/0000:81:00.1/remove
$ echo 1 > /sys/bus/pci/devices/0000:80:00.0/pci_bus/0000:81/rescan

0000:80:00.0 is root port and is runtime suspended and we cannot
get 0000:81:00.1 after rescan.

Make bridge powered on when scanning the child bus, by adding
pm_runtime_get_sync()/pm_runtime_put() in pci_scan_child_bus_extend().

Cc: Rafael J. Wysocki <rafael@...nel.org>
Cc: Mika Westerberg <mika.westerberg@...ux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>
Signed-off-by: Yicong Yang <yangyicong@...ilicon.com>
---
Change since v3:
- retain the pm_runtime_*() calls in pci_scan_bridge_extend() as Rafael points
  out that it's necessary when the brigde is in D3cold
Link: https://lore.kernel.org/linux-pci/20220414123736.34150-1-yangyicong@hisilicon.com/

Change since v2:
- just rebase it on v5.18-rc2
Link: https://lore.kernel.org/linux-pci/1601029386-4928-1-git-send-email-yangyicong@hisilicon.com/

Change since v1:
- use an intermediate variable *bridge as suggested
- remove the pm_runtime_*() calls in pci_scan_bridge_extend()
Link: https://lore.kernel.org/linux-pci/1596022223-4765-1-git-send-email-yangyicong@hisilicon.com/

 drivers/pci/probe.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 17a969942d37..b108e72b6586 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -2859,11 +2859,20 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
 	unsigned int used_buses, normal_bridges = 0, hotplug_bridges = 0;
 	unsigned int start = bus->busn_res.start;
 	unsigned int devfn, fn, cmax, max = start;
+	struct pci_dev *bridge = bus->self;
 	struct pci_dev *dev;
 	int nr_devs;
 
 	dev_dbg(&bus->dev, "scanning bus\n");
 
+	/*
+	 * Make sure the bus bridge is powered on, otherwise we may not be
+	 * able to scan the devices as we may fail to access the configuration
+	 * space of subordinates.
+	 */
+	if (bridge)
+		pm_runtime_get_sync(&bridge->dev);
+
 	/* Go find them, Rover! */
 	for (devfn = 0; devfn < 256; devfn += 8) {
 		nr_devs = pci_scan_slot(bus, devfn);
@@ -2976,6 +2985,9 @@ static unsigned int pci_scan_child_bus_extend(struct pci_bus *bus,
 		}
 	}
 
+	if (bridge)
+		pm_runtime_put(&bridge->dev);
+
 	/*
 	 * We've scanned the bus and so we know all about what's on
 	 * the other side of any bridges that may be on this bus plus
-- 
2.24.0