| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YmKiDt12Xb/KXX3z@hyeyoo>
Date: Fri, 22 Apr 2022 21:39:42 +0900
From: Hyeonggon Yoo <42.hyeyoo@...il.com>
To: Peter Collingbourne <pcc@...gle.com>
Cc: Andrey Konovalov <andreyknvl@...il.com>,
Andrew Morton <akpm@...ux-foundation.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
Linux Memory Management List <linux-mm@...ck.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
vbabka@...e.cz, penberg@...nel.org, cl@...ux.org,
roman.gushchin@...ux.dev, iamjoonsoo.kim@....com,
rientjes@...gle.com, Catalin Marinas <catalin.marinas@....com>,
Herbert Xu <herbert@...dor.apana.org.au>,
Andrey Ryabinin <ryabinin.a.a@...il.com>,
Alexander Potapenko <glider@...gle.com>,
Dmitry Vyukov <dvyukov@...gle.com>,
kasan-dev <kasan-dev@...glegroups.com>,
Eric Biederman <ebiederm@...ssion.com>,
Kees Cook <keescook@...omium.org>
Subject: Re: [PATCH] mm: make minimum slab alignment a runtime property
On Thu, Apr 21, 2022 at 10:16:25AM -0700, Peter Collingbourne wrote:
> On Thu, Apr 21, 2022 at 5:30 AM Hyeonggon Yoo <42.hyeyoo@...il.com> wrote:
> >
> > On Wed, Apr 20, 2022 at 08:17:38PM -0700, Peter Collingbourne wrote:
> > > When CONFIG_KASAN_HW_TAGS is enabled we currently increase the minimum
> > > slab alignment to 16. This happens even if MTE is not supported in
> > > hardware or disabled via kasan=off, which creates an unnecessary
> > > memory overhead in those cases. Eliminate this overhead by making
> > > the minimum slab alignment a runtime property and only aligning to
> > > 16 if KASAN is enabled at runtime.
> > >
> > > On a DragonBoard 845c (non-MTE hardware) with a kernel built with
> > > CONFIG_KASAN_HW_TAGS, waiting for quiescence after a full Android
> > > boot I see the following Slab measurements in /proc/meminfo (median
> > > of 3 reboots):
> > >
> > > Before: 169020 kB
> > > After: 167304 kB
> > >
> > > Link: https://linux-review.googlesource.com/id/I752e725179b43b144153f4b6f584ceb646473ead
> > > Signed-off-by: Peter Collingbourne <pcc@...gle.com>
> > > ---
> > > arch/arc/include/asm/cache.h | 4 ++--
> > > arch/arm/include/asm/cache.h | 2 +-
> > > arch/arm64/include/asm/cache.h | 19 +++++++++++++------
> > > arch/microblaze/include/asm/page.h | 2 +-
> > > arch/riscv/include/asm/cache.h | 2 +-
> > > arch/sparc/include/asm/cache.h | 2 +-
> > > arch/xtensa/include/asm/processor.h | 2 +-
> > > fs/binfmt_flat.c | 9 ++++++---
> > > include/crypto/hash.h | 2 +-
> > > include/linux/slab.h | 22 +++++++++++++++++-----
> > > mm/slab.c | 7 +++----
> > > mm/slab_common.c | 3 +--
> > > mm/slob.c | 6 +++---
> > > 13 files changed, 51 insertions(+), 31 deletions(-)
> >
> > [+Cc slab people, Catalin and affected subsystems' folks]
> >
> > just FYI, There is similar discussion about kmalloc caches' alignment.
> > https://lore.kernel.org/linux-mm/20220405135758.774016-1-catalin.marinas@arm.com/
> >
> > It seems this is another demand for runtime resolution of slab
> > alignment, But slightly different from kmalloc as there is no requirement
> > for DMA alignment.
> >
> > >
> > > diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
> > > index f0f1fc5d62b6..b6a7763fd5d6 100644
> > > --- a/arch/arc/include/asm/cache.h
> > > +++ b/arch/arc/include/asm/cache.h
> > > @@ -55,11 +55,11 @@
> > > * Make sure slab-allocated buffers are 64-bit aligned when atomic64_t uses
> > > * ARCv2 64-bit atomics (LLOCKD/SCONDD). This guarantess runtime 64-bit
> > > * alignment for any atomic64_t embedded in buffer.
> > > - * Default ARCH_SLAB_MINALIGN is __alignof__(long long) which has a relaxed
> > > + * Default ARCH_SLAB_MIN_MINALIGN is __alignof__(long long) which has a relaxed
> > > * value of 4 (and not 8) in ARC ABI.
> > > */
> > > #if defined(CONFIG_ARC_HAS_LL64) && defined(CONFIG_ARC_HAS_LLSC)
> > > -#define ARCH_SLAB_MINALIGN 8
> > > +#define ARCH_SLAB_MIN_MINALIGN 8
> > > #endifh
> > >
> >
> > Why isn't it just ARCH_SLAB_MINALIGN?
>
> Because this is the minimum possible value of the minimum alignment
> decided at runtime. I chose to give it a different name to
> arch_slab_minalign() because the two have different meanings.
>
> Granted this isn't a great name because of the stuttering but
> hopefully it will prompt folks to investigate the meaning of this
> constant if necessary.
To be honest I don't care much about the name but just thought it's just better
to be consistent with Catalin's series: ARCH_KMALLOC_MINALIGN for static
alignment and arch_kmalloc_minalign() for (possibly bigger) alignment decided
at runtime.
> > > extern int ioc_enable;
> > > diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
> > > index e3ea34558ada..3e1018bb9805 100644
> > > --- a/arch/arm/include/asm/cache.h
> > > +++ b/arch/arm/include/asm/cache.h
> > > @@ -21,7 +21,7 @@
> > > * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
> > > */
> > > #if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
> > > -#define ARCH_SLAB_MINALIGN 8
> > > +#define ARCH_SLAB_MIN_MINALIGN 8
> > > #endif
> > >
> > > #define __read_mostly __section(".data..read_mostly")
> > > diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h
> > > index a074459f8f2f..38f171591c3f 100644
> > > --- a/arch/arm64/include/asm/cache.h
> > > +++ b/arch/arm64/include/asm/cache.h
> > > @@ -6,6 +6,7 @@
> > > #define __ASM_CACHE_H
> > >
> > > #include <asm/cputype.h>
> > > +#include <asm/mte-def.h>
> > >
> > > #define CTR_L1IP_SHIFT 14
> > > #define CTR_L1IP_MASK 3
> > > @@ -49,15 +50,21 @@
> > > */
> > > #define ARCH_DMA_MINALIGN (128)
> > >
> > > -#ifdef CONFIG_KASAN_SW_TAGS
> > > -#define ARCH_SLAB_MINALIGN (1ULL << KASAN_SHADOW_SCALE_SHIFT)
> > > -#elif defined(CONFIG_KASAN_HW_TAGS)
> > > -#define ARCH_SLAB_MINALIGN MTE_GRANULE_SIZE
> > > -#endif
> > > -
> > > #ifndef __ASSEMBLY__
> > >
> > > #include <linux/bitops.h>
> > > +#include <linux/kasan-enabled.h>
> > > +
> > > +#ifdef CONFIG_KASAN_SW_TAGS
> > > +#define ARCH_SLAB_MIN_MINALIGN (1ULL << KASAN_SHADOW_SCALE_SHIFT)
> > > +#elif defined(CONFIG_KASAN_HW_TAGS)
> > > +static inline size_t arch_slab_minalign(void)
> > > +{
> > > + return kasan_hw_tags_enabled() ? MTE_GRANULE_SIZE :
> > > + __alignof__(unsigned long long);
> > > +}
> > > +#define arch_slab_minalign() arch_slab_minalign()
> > > +#endif
> > >
> >
> > kasan_hw_tags_enabled() is also false when kasan is just not initialized yet.
> > What about writing a new helper something like kasan_is_disabled()
> > instead?
>
> The decision of whether to enable KASAN is made early, before the slab
> allocator is initialized (start_kernel -> smp_prepare_boot_cpu ->
> kasan_init_hw_tags vs start_kernel -> mm_init -> kmem_cache_init). If
> you think about it, this needs to be the case for KASAN to operate
> correctly because it influences the behavior of the slab allocator via
> the kasan_*poison* hooks. So I don't think we can end up calling this
> function before then.
Sounds not bad. I wanted to make sure the value of arch_slab_minaligned()
is not changed during its execution.
Just some part of me thought something like this would be more
intuitive/robust.
if (systems_supports_mte() && kasan_arg != KASAN_ARG_OFF)
return MTE_GRANULE_SIZE;
else
return __alignof__(unsigned long long);
> > > #define ICACHEF_ALIASING 0
> > > #define ICACHEF_VPIPT 1
> > > diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
> > > index 4b8b2fa78fc5..ccdbc1da3c3e 100644
> > > --- a/arch/microblaze/include/asm/page.h
> > > +++ b/arch/microblaze/include/asm/page.h
> > > @@ -33,7 +33,7 @@
> > > /* MS be sure that SLAB allocates aligned objects */
> > > #define ARCH_DMA_MINALIGN L1_CACHE_BYTES
> > >
> > > -#define ARCH_SLAB_MINALIGN L1_CACHE_BYTES
> > > +#define ARCH_SLAB_MIN_MINALIGN L1_CACHE_BYTES
> > >
> > > /*
> > > * PAGE_OFFSET -- the first address of the first page of memory. With MMU
> > > diff --git a/arch/riscv/include/asm/cache.h b/arch/riscv/include/asm/cache.h
> > > index 9b58b104559e..7beb3b5d27c7 100644
> > > --- a/arch/riscv/include/asm/cache.h
> > > +++ b/arch/riscv/include/asm/cache.h
> > > @@ -16,7 +16,7 @@
> > > * the flat loader aligns it accordingly.
> > > */
> > > #ifndef CONFIG_MMU
> > > -#define ARCH_SLAB_MINALIGN 16
> > > +#define ARCH_SLAB_MIN_MINALIGN 16
> > > #endif
> > >
> > > #endif /* _ASM_RISCV_CACHE_H */
> > > diff --git a/arch/sparc/include/asm/cache.h b/arch/sparc/include/asm/cache.h
> > > index e62fd0e72606..9d8cb4687b7e 100644
> > > --- a/arch/sparc/include/asm/cache.h
> > > +++ b/arch/sparc/include/asm/cache.h
> > > @@ -8,7 +8,7 @@
> > > #ifndef _SPARC_CACHE_H
> > > #define _SPARC_CACHE_H
> > >
> > > -#define ARCH_SLAB_MINALIGN __alignof__(unsigned long long)
> > > +#define ARCH_SLAB_MIN_MINALIGN __alignof__(unsigned long long)
> > >
> > > #define L1_CACHE_SHIFT 5
> > > #define L1_CACHE_BYTES 32
> > > diff --git a/arch/xtensa/include/asm/processor.h b/arch/xtensa/include/asm/processor.h
> > > index 4489a27d527a..e3ea278e3fcf 100644
> > > --- a/arch/xtensa/include/asm/processor.h
> > > +++ b/arch/xtensa/include/asm/processor.h
> > > @@ -18,7 +18,7 @@
> > > #include <asm/types.h>
> > > #include <asm/regs.h>
> > >
> > > -#define ARCH_SLAB_MINALIGN XTENSA_STACK_ALIGNMENT
> > > +#define ARCH_SLAB_MIN_MINALIGN XTENSA_STACK_ALIGNMENT
> > >
> > > /*
> > > * User space process size: 1 GB.
> > > diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
> > > index 626898150011..8ff1bf7d1e87 100644
> > > --- a/fs/binfmt_flat.c
> > > +++ b/fs/binfmt_flat.c
> > > @@ -64,7 +64,10 @@
> > > * Here we can be a bit looser than the data sections since this
> > > * needs to only meet arch ABI requirements.
> > > */
> > > -#define FLAT_STACK_ALIGN max_t(unsigned long, sizeof(void *), ARCH_SLAB_MINALIGN)
> > > +static size_t flat_stack_align(void)
> > > +{
> > > + return max_t(unsigned long, sizeof(void *), arch_slab_minalign());
> > > +}
> > >
> > > #define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
> > > #define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
> > > @@ -148,7 +151,7 @@ static int create_flat_tables(struct linux_binprm *bprm, unsigned long arg_start
> > > sp -= 2; /* argvp + envp */
> > > sp -= 1; /* &argc */
> > >
> > > - current->mm->start_stack = (unsigned long)sp & -FLAT_STACK_ALIGN;
> > > + current->mm->start_stack = (unsigned long)sp & -flat_stack_align();
> > > sp = (unsigned long __user *)current->mm->start_stack;
> > >
> > > if (put_user(bprm->argc, sp++))
> > > @@ -966,7 +969,7 @@ static int load_flat_binary(struct linux_binprm *bprm)
> > > #endif
> > > stack_len += (bprm->argc + 1) * sizeof(char *); /* the argv array */
> > > stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */
> > > - stack_len = ALIGN(stack_len, FLAT_STACK_ALIGN);
> > > + stack_len = ALIGN(stack_len, flat_stack_align());
> > >
> > > res = load_flat_file(bprm, &libinfo, 0, &stack_len);
> > > if (res < 0)
> > > diff --git a/include/crypto/hash.h b/include/crypto/hash.h
> > > index f140e4643949..442c290f458c 100644
> > > --- a/include/crypto/hash.h
> > > +++ b/include/crypto/hash.h
> > > @@ -149,7 +149,7 @@ struct ahash_alg {
> > >
> > > struct shash_desc {
> > > struct crypto_shash *tfm;
> > > - void *__ctx[] __aligned(ARCH_SLAB_MINALIGN);
> > > + void *__ctx[] __aligned(ARCH_SLAB_MIN_MINALIGN);
> > > };
> > >
> > > #define HASH_MAX_DIGESTSIZE 64
> > > diff --git a/include/linux/slab.h b/include/linux/slab.h
> > > index 373b3ef99f4e..80e517593372 100644
> > > --- a/include/linux/slab.h
> > > +++ b/include/linux/slab.h
> > > @@ -201,21 +201,33 @@ void kmem_dump_obj(void *object);
> > > #endif
> > >
> > > /*
> > > - * Setting ARCH_SLAB_MINALIGN in arch headers allows a different alignment.
> > > + * Setting ARCH_SLAB_MIN_MINALIGN in arch headers allows a different alignment.
> > > * Intended for arches that get misalignment faults even for 64 bit integer
> > > * aligned buffers.
> > > */
> > > -#ifndef ARCH_SLAB_MINALIGN
> > > -#define ARCH_SLAB_MINALIGN __alignof__(unsigned long long)
> > > +#ifndef ARCH_SLAB_MIN_MINALIGN
> > > +#define ARCH_SLAB_MIN_MINALIGN __alignof__(unsigned long long)
> > > +#endif
> > > +
> > > +/*
> > > + * Arches can define this function if they want to decide the minimum slab
> > > + * alignment at runtime. The value returned by the function must be
> > > + * >= ARCH_SLAB_MIN_MINALIGN.
> > > + */
> >
> > Not only the value should be bigger than or equal to ARCH_SLAB_MIN_MINALIGN,
> > it should be compatible with ARCH_SLAB_MIN_MINALIGN.
>
> What's the difference?
>
231 /*
232 * kmalloc and friends return ARCH_KMALLOC_MINALIGN aligned
233 * pointers. kmem_cache_alloc and friends return ARCH_SLAB_MIN_MINALIGN
234 * aligned pointers.
235 */
236 #define __assume_kmalloc_alignment __assume_aligned(ARCH_KMALLOC_MINALIGN)
237 #define __assume_slab_alignment __assume_aligned(ARCH_SLAB_MIN_MINALIGN)
238 #define __assume_page_alignment __assume_aligned(PAGE_SIZE)
I mean actual slab object size should be both ARCH_SLAB_MIN_MINALIGN-aligned and
arch_slab_minalign()-aligned. Otherwise we are lying to the compiler.
It's okay If we use just power-of-two alignment.
But adding a comment wouldn't harm :)
Thank you for the work. I think the patch makes sense as usually people
don't build and install their kernel for arm64 machines.
> Peter
--
Thanks,
Hyeonggon
Powered by blists - more mailing lists