| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YmTcrq8Gzel0zYYD@jackdesk>
Date: Sun, 24 Apr 2022 00:14:22 -0500
From: Jack Doan <me@...kdoan.com>
To: linux-hwmon@...r.kernel.org
Cc: Aleksa Savic <savicaleksa83@...il.com>,
Jack Doan <me@...kdoan.com>, Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Jonathan Corbet <corbet@....net>, linux-doc@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2] hwmon: (aquacomputer_d5next) Add support for Aquacomputer
Farbwerk
Extend aquacomputer_d5next driver to expose hardware
temperature sensors of the Aquacomputer Farbwerk RGB controller, which
communicates through a proprietary USB HID protocol.
Four temperature sensors are available. Additionally, serial number and
firmware version are exposed through debugfs.
Also, add Jack Doan to MAINTAINERS for this driver.
Signed-off-by: Jack Doan <me@...kdoan.com>
Signed-off-by: Aleksa Savic <savicaleksa83@...il.com>
---
Changes in v2:
- update Kconfig so it applies cleanly
- add "select CRC16" to Kconfig
---
Documentation/hwmon/aquacomputer_d5next.rst | 3 +-
MAINTAINERS | 1 +
drivers/hwmon/Kconfig | 5 +--
drivers/hwmon/aquacomputer_d5next.c | 37 ++++++++++++++++++---
4 files changed, 38 insertions(+), 8 deletions(-)
diff --git a/Documentation/hwmon/aquacomputer_d5next.rst b/Documentation/hwmon/aquacomputer_d5next.rst
index e69f718caf5b..717e28226cde 100644
--- a/Documentation/hwmon/aquacomputer_d5next.rst
+++ b/Documentation/hwmon/aquacomputer_d5next.rst
@@ -6,6 +6,7 @@ Kernel driver aquacomputer-d5next
Supported devices:
* Aquacomputer D5 Next watercooling pump
+* Aquacomputer Farbwerk RGB controller
* Aquacomputer Farbwerk 360 RGB controller
* Aquacomputer Octo fan controller
@@ -32,7 +33,7 @@ better suited for userspace tools.
The Octo exposes four temperature sensors and eight PWM controllable fans, along
with their speed (in RPM), power, voltage and current.
-The Farbwerk 360 exposes four temperature sensors. Depending on the device,
+The Farbwerk and Farbwerk 360 expose four temperature sensors. Depending on the device,
not all sysfs and debugfs entries will be available.
Usage notes
diff --git a/MAINTAINERS b/MAINTAINERS
index fd768d43e048..c5cd8dd866ee 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1446,6 +1446,7 @@ F: drivers/media/i2c/aptina-pll.*
AQUACOMPUTER D5 NEXT PUMP SENSOR DRIVER
M: Aleksa Savic <savicaleksa83@...il.com>
+M: Jack Doan <me@...kdoan.com>
L: linux-hwmon@...r.kernel.org
S: Maintained
F: Documentation/hwmon/aquacomputer_d5next.rst
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 1f1bb4d858cb..4a6d6c5b9b69 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -256,13 +256,14 @@ config SENSORS_AHT10
will be called aht10.
config SENSORS_AQUACOMPUTER_D5NEXT
- tristate "Aquacomputer D5 Next, Octo and Farbwerk 360"
+ tristate "Aquacomputer D5 Next, Octo, Farbwerk, and Farbwerk 360"
depends on USB_HID
select CRC16
help
If you say yes here you get support for sensors and fans of
the Aquacomputer D5 Next watercooling pump, Octo fan
- controller and Farbwerk 360 RGB controller, where available.
+ controller, Farbwerk and Farbwerk 360 RGB controllers, where
+ available.
This driver can also be built as a module. If so, the module
will be called aquacomputer_d5next.
diff --git a/drivers/hwmon/aquacomputer_d5next.c b/drivers/hwmon/aquacomputer_d5next.c
index a464473bc981..7d2e7279abfb 100644
--- a/drivers/hwmon/aquacomputer_d5next.c
+++ b/drivers/hwmon/aquacomputer_d5next.c
@@ -1,11 +1,12 @@
// SPDX-License-Identifier: GPL-2.0+
/*
- * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk 360, Octo)
+ * hwmon driver for Aquacomputer devices (D5 Next, Farbwerk, Farbwerk 360, Octo)
*
* Aquacomputer devices send HID reports (with ID 0x01) every second to report
* sensor values.
*
* Copyright 2021 Aleksa Savic <savicaleksa83@...il.com>
+ * Copyright 2022 Jack Doan <me@...kdoan.com>
*/
#include <linux/crc16.h>
@@ -19,14 +20,16 @@
#include <asm/unaligned.h>
#define USB_VENDOR_ID_AQUACOMPUTER 0x0c70
+#define USB_PRODUCT_ID_FARBWERK 0xf00a
#define USB_PRODUCT_ID_D5NEXT 0xf00e
#define USB_PRODUCT_ID_FARBWERK360 0xf010
#define USB_PRODUCT_ID_OCTO 0xf011
-enum kinds { d5next, farbwerk360, octo };
+enum kinds { d5next, farbwerk, farbwerk360, octo };
static const char *const aqc_device_names[] = {
[d5next] = "d5next",
+ [farbwerk] = "farbwerk",
[farbwerk360] = "farbwerk360",
[octo] = "octo"
};
@@ -69,6 +72,12 @@ static u8 secondary_ctrl_report[] = {
#define D5NEXT_PUMP_CURRENT 112
#define D5NEXT_FAN_CURRENT 99
+/* Register offsets for the Farbwerk RGB controller */
+#define FARBWERK_NUM_SENSORS 4
+#define FARBWERK_SENSOR_START 0x2f
+#define FARBWERK_SENSOR_SIZE 0x02
+#define FARBWERK_SENSOR_DISCONNECTED 0x7FFF
+
/* Register offsets for the Farbwerk 360 RGB controller */
#define FARBWERK360_NUM_SENSORS 4
#define FARBWERK360_SENSOR_START 0x32
@@ -125,7 +134,7 @@ static const char *const label_d5next_current[] = {
"Fan current"
};
-/* Labels for Farbwerk 360 and Octo temperature sensors */
+/* Labels for Farbwerk, Farbwerk 360 and Octo temperature sensors */
static const char *const label_temp_sensors[] = {
"Sensor 1",
"Sensor 2",
@@ -319,6 +328,7 @@ static umode_t aqc_is_visible(const void *data, enum hwmon_sensor_types type, u3
if (channel == 0)
return 0444;
break;
+ case farbwerk:
case farbwerk360:
case octo:
return 0444;
@@ -551,8 +561,7 @@ static const struct hwmon_chip_info aqc_chip_info = {
.info = aqc_info,
};
-static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data,
- int size)
+static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, int size)
{
int i, sensor_value;
struct aqc_data *priv;
@@ -587,6 +596,17 @@ static int aqc_raw_event(struct hid_device *hdev, struct hid_report *report, u8
priv->current_input[0] = get_unaligned_be16(data + D5NEXT_PUMP_CURRENT);
priv->current_input[1] = get_unaligned_be16(data + D5NEXT_FAN_CURRENT);
break;
+ case farbwerk:
+ /* Temperature sensor readings */
+ for (i = 0; i < FARBWERK_NUM_SENSORS; i++) {
+ sensor_value = get_unaligned_be16(data + FARBWERK_SENSOR_START +
+ i * FARBWERK_SENSOR_SIZE);
+ if (sensor_value == FARBWERK_SENSOR_DISCONNECTED)
+ priv->temp_input[i] = -ENODATA;
+ else
+ priv->temp_input[i] = sensor_value * 10;
+ }
+ break;
case farbwerk360:
/* Temperature sensor readings */
for (i = 0; i < FARBWERK360_NUM_SENSORS; i++) {
@@ -733,6 +753,11 @@ static int aqc_probe(struct hid_device *hdev, const struct hid_device_id *id)
priv->voltage_label = label_d5next_voltages;
priv->current_label = label_d5next_current;
break;
+ case USB_PRODUCT_ID_FARBWERK:
+ priv->kind = farbwerk;
+
+ priv->temp_label = label_temp_sensors;
+ break;
case USB_PRODUCT_ID_FARBWERK360:
priv->kind = farbwerk360;
@@ -795,6 +820,7 @@ static void aqc_remove(struct hid_device *hdev)
static const struct hid_device_id aqc_table[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_D5NEXT) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_FARBWERK360) },
{ HID_USB_DEVICE(USB_VENDOR_ID_AQUACOMPUTER, USB_PRODUCT_ID_OCTO) },
{ }
@@ -826,4 +852,5 @@ module_exit(aqc_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Aleksa Savic <savicaleksa83@...il.com>");
+MODULE_AUTHOR("Jack Doan <me@...kdoan.com>");
MODULE_DESCRIPTION("Hwmon driver for Aquacomputer devices");
--
2.36.0
Powered by blists - more mailing lists