| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <92734c71f40541a5e8b4af16c5c4f1563660fa92.camel@perches.com>
Date: Sun, 24 Apr 2022 03:54:02 -0700
From: Joe Perches <joe@...ches.com>
To: Wan Jiabing <wanjiabing@...o.com>,
Michael Ellerman <mpe@...erman.id.au>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Paul Mackerras <paulus@...ba.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>,
linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org
Cc: kael_w@...h.net
Subject: Re: [PATCH] tty/hvc_opal: simplify if-if to if-else
On Sun, 2022-04-24 at 17:25 +0800, Wan Jiabing wrote:
> Use if and else instead of if(A) and if (!A).
[]
> diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
[]
> @@ -344,14 +344,15 @@ void __init hvc_opal_init_early(void)
> opal = of_find_node_by_path("/ibm,opal/consoles");
> if (opal)
> pr_devel("hvc_opal: Found consoles in new location\n");
> - if (!opal) {
> + else {
> opal = of_find_node_by_path("/ibm,opal");
> if (opal)
> pr_devel("hvc_opal: "
> "Found consoles in old location\n");
> + else
> + return;
A few things:
o add {} braces to first block before else
o see about using pr_fmt to prefix the pr_<level> output
o reverse the test and unindent the pr_devel
if (!opal)
return;
pr_devel("...);
Maybe a few more just to quiet checkpatch noise. Something like:
---
drivers/tty/hvc/hvc_opal.c | 58 +++++++++++++++++++++++++---------------------
1 file changed, 31 insertions(+), 27 deletions(-)
diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c
index 84776bc641e6b..a42d5697ae198 100644
--- a/drivers/tty/hvc/hvc_opal.c
+++ b/drivers/tty/hvc/hvc_opal.c
@@ -5,6 +5,8 @@
* Copyright 2011 Benjamin Herrenschmidt <benh@...nel.crashing.org>, IBM Corp.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#undef DEBUG
#include <linux/types.h>
@@ -43,6 +45,7 @@ struct hvc_opal_priv {
hv_protocol_t proto; /* Raw data or HVSI packets */
struct hvsi_priv hvsi; /* HVSI specific data */
};
+
static struct hvc_opal_priv *hvc_opal_privs[MAX_NR_HVC_CONSOLES];
/* For early boot console */
@@ -124,7 +127,7 @@ static int hvc_opal_hvsi_tiocmget(struct hvc_struct *hp)
}
static int hvc_opal_hvsi_tiocmset(struct hvc_struct *hp, unsigned int set,
- unsigned int clear)
+ unsigned int clear)
{
struct hvc_opal_priv *pv = hvc_opal_privs[hp->vtermno];
@@ -167,8 +170,7 @@ static int hvc_opal_probe(struct platform_device *dev)
proto = HV_PROTOCOL_HVSI;
ops = &hvc_opal_hvsi_ops;
} else {
- pr_err("hvc_opal: Unknown protocol for %pOF\n",
- dev->dev.of_node);
+ pr_err("Unknown protocol for %pOF\n", dev->dev.of_node);
return -ENXIO;
}
@@ -195,15 +197,16 @@ static int hvc_opal_probe(struct platform_device *dev)
termno, 0);
}
- /* Instanciate now to establish a mapping index==vtermno */
+ /* Instantiate now to establish a mapping index==vtermno */
hvc_instantiate(termno, termno, ops);
} else {
- pr_err("hvc_opal: Device %pOF has duplicate terminal number #%d\n",
+ pr_err("Device %pOF has duplicate terminal number #%d\n",
dev->dev.of_node, termno);
return -ENXIO;
}
- pr_info("hvc%d: %s protocol on %pOF%s\n", termno,
+ pr_info("hvc%d: %s protocol on %pOF%s\n",
+ termno,
proto == HV_PROTOCOL_RAW ? "raw" : "hvsi",
dev->dev.of_node,
boot ? " (boot console)" : "");
@@ -211,13 +214,13 @@ static int hvc_opal_probe(struct platform_device *dev)
irq = irq_of_parse_and_map(dev->dev.of_node, 0);
if (!irq) {
pr_info("hvc%d: No interrupts property, using OPAL event\n",
- termno);
+ termno);
irq = opal_event_request(ilog2(OPAL_EVENT_CONSOLE_INPUT));
}
if (!irq) {
- pr_err("hvc_opal: Unable to map interrupt for device %pOF\n",
- dev->dev.of_node);
+ pr_err("Unable to map interrupt for device %pOF\n",
+ dev->dev.of_node);
return irq;
}
@@ -275,7 +278,7 @@ static void udbg_opal_putc(char c)
udbg_opal_putc('\r');
do {
- switch(hvc_opal_boot_priv.proto) {
+ switch (hvc_opal_boot_priv.proto) {
case HV_PROTOCOL_RAW:
count = opal_put_chars(termno, &c, 1);
break;
@@ -288,7 +291,7 @@ static void udbg_opal_putc(char c)
* when there aren't any interrupts.
*/
opal_flush_console(termno);
- } while(count == 0 || count == -EAGAIN);
+ } while (count == 0 || count == -EAGAIN);
}
static int udbg_opal_getc_poll(void)
@@ -297,7 +300,7 @@ static int udbg_opal_getc_poll(void)
int rc = 0;
char c;
- switch(hvc_opal_boot_priv.proto) {
+ switch (hvc_opal_boot_priv.proto) {
case HV_PROTOCOL_RAW:
rc = opal_get_chars(termno, &c, 1);
break;
@@ -313,6 +316,7 @@ static int udbg_opal_getc_poll(void)
static int udbg_opal_getc(void)
{
int ch;
+
for (;;) {
ch = udbg_opal_getc_poll();
if (ch != -1)
@@ -342,16 +346,14 @@ void __init hvc_opal_init_early(void)
* path, so we hard wire it
*/
opal = of_find_node_by_path("/ibm,opal/consoles");
- if (opal)
- pr_devel("hvc_opal: Found consoles in new location\n");
- if (!opal) {
+ if (opal) {
+ pr_devel("Found consoles in new location\n");
+ } else {
opal = of_find_node_by_path("/ibm,opal");
- if (opal)
- pr_devel("hvc_opal: "
- "Found consoles in old location\n");
+ if (!opal)
+ return;
+ pr_devel("Found consoles in old location\n");
}
- if (!opal)
- return;
for_each_child_of_node(opal, np) {
if (of_node_name_eq(np, "serial")) {
stdout_node = np;
@@ -359,9 +361,9 @@ void __init hvc_opal_init_early(void)
}
}
of_node_put(opal);
+ if (!stdout_node)
+ return;
}
- if (!stdout_node)
- return;
termno = of_get_property(stdout_node, "reg", NULL);
index = termno ? be32_to_cpup(termno) : 0;
if (index >= MAX_NR_HVC_CONSOLES)
@@ -372,9 +374,8 @@ void __init hvc_opal_init_early(void)
if (of_device_is_compatible(stdout_node, "ibm,opal-console-raw")) {
hvc_opal_boot_priv.proto = HV_PROTOCOL_RAW;
ops = &hvc_opal_raw_ops;
- pr_devel("hvc_opal: Found RAW console\n");
- }
- else if (of_device_is_compatible(stdout_node,"ibm,opal-console-hvsi")) {
+ pr_devel("Found RAW console\n");
+ } else if (of_device_is_compatible(stdout_node, "ibm,opal-console-hvsi")) {
hvc_opal_boot_priv.proto = HV_PROTOCOL_HVSI;
ops = &hvc_opal_hvsi_ops;
hvsilib_init(&hvc_opal_boot_priv.hvsi,
@@ -382,9 +383,10 @@ void __init hvc_opal_init_early(void)
index, 1);
/* HVSI, perform the handshake now */
hvsilib_establish(&hvc_opal_boot_priv.hvsi);
- pr_devel("hvc_opal: Found HVSI console\n");
- } else
+ pr_devel("Found HVSI console\n");
+ } else {
goto out;
+ }
hvc_opal_boot_termno = index;
udbg_init_opal_common();
add_preferred_console("hvc", index, NULL);
@@ -397,6 +399,7 @@ void __init hvc_opal_init_early(void)
void __init udbg_init_debug_opal_raw(void)
{
u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO;
+
hvc_opal_privs[index] = &hvc_opal_boot_priv;
hvc_opal_boot_priv.proto = HV_PROTOCOL_RAW;
hvc_opal_boot_termno = index;
@@ -408,6 +411,7 @@ void __init udbg_init_debug_opal_raw(void)
void __init udbg_init_debug_opal_hvsi(void)
{
u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO;
+
hvc_opal_privs[index] = &hvc_opal_boot_priv;
hvc_opal_boot_termno = index;
udbg_init_opal_common();
Powered by blists - more mailing lists