Message-ID: <CAJHc60y4bR4Ni-kyt4PHT40ckDS531Cuf-sxM2ebB2hHfRpOEw@mail.gmail.com>
Date:   Mon, 25 Apr 2022 09:52:40 -0700
From:   Raghavendra Rao Ananta <rananta@...gle.com>
To:     Reiji Watanabe <reijiw@...gle.com>
Cc:     Marc Zyngier <maz@...nel.org>, Andrew Jones <drjones@...hat.com>,
        James Morse <james.morse@....com>,
        Alexandru Elisei <alexandru.elisei@....com>,
        Suzuki K Poulose <suzuki.poulose@....com>,
        Paolo Bonzini <pbonzini@...hat.com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will@...nel.org>, Peter Shier <pshier@...gle.com>,
        Ricardo Koller <ricarkol@...gle.com>,
        Oliver Upton <oupton@...gle.com>,
        Jing Zhang <jingzhangos@...gle.com>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        kvmarm@...ts.cs.columbia.edu, linux-kernel@...r.kernel.org,
        kvm@...r.kernel.org
Subject: Re: [PATCH v6 6/9] Docs: KVM: Add doc for the bitmap firmware registers

On Sun, Apr 24, 2022 at 11:31 PM Reiji Watanabe <reijiw@...gle.com> wrote:
>
> Hi Raghu,
>
> On Fri, Apr 22, 2022 at 5:03 PM Raghavendra Rao Ananta
> <rananta@...gle.com> wrote:
> >
> > Add the documentation for the bitmap firmware registers in
> > hypercalls.rst and api.rst. This includes the details for
> > KVM_REG_ARM_STD_BMAP, KVM_REG_ARM_STD_HYP_BMAP, and
> > KVM_REG_ARM_VENDOR_HYP_BMAP registers.
> >
> > Since the document is growing to carry other hypercall related
> > information, make necessary adjustments to present the document
> > in a generic sense, rather than being PSCI focused.
> >
> > Signed-off-by: Raghavendra Rao Ananta <rananta@...gle.com>
> > ---
> >  Documentation/virt/kvm/api.rst            | 16 ++++
> >  Documentation/virt/kvm/arm/hypercalls.rst | 94 ++++++++++++++++++-----
> >  2 files changed, 92 insertions(+), 18 deletions(-)
> >
> > diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> > index 85c7abc51af5..ac489191d0a9 100644
> > --- a/Documentation/virt/kvm/api.rst
> > +++ b/Documentation/virt/kvm/api.rst
> > @@ -2542,6 +2542,22 @@ arm64 firmware pseudo-registers have the following bit pattern::
> >
> >    0x6030 0000 0014 <regno:16>
> >
> > +arm64 bitmap feature firmware pseudo-registers have the following bit pattern::
> > +
> > +  0x6030 0000 0016 <regno:16>
> > +
> > +The bitmap feature firmware registers exposes the hypercall services that are
> > +available for userspace to configure. The set bits corresponds to the services
> > +that are available for the guests to access. By default, KVM sets all the
> > +supported bits during VM initialization. The userspace can discover the
> > +available services via KVM_GET_ONE_REG, and write back the bitmap corresponding
> > +to the features that it wishes guests to see via KVM_SET_ONE_REG.
> > +
> > +Note: These registers are immutable once any of the vCPUs of the VM has run at
> > +least once. A KVM_SET_ONE_REG in such a scenario will return a -EBUSY to userspace.
> > +
> > +(See Documentation/virt/kvm/arm/hypercalls.rst for more details.)
> > +
> >  arm64 SVE registers have the following bit patterns::
> >
> >    0x6080 0000 0015 00 <n:5> <slice:5>   Zn bits[2048*slice + 2047 : 2048*slice]
> > diff --git a/Documentation/virt/kvm/arm/hypercalls.rst b/Documentation/virt/kvm/arm/hypercalls.rst
> > index d52c2e83b5b8..6327c504b2fb 100644
> > --- a/Documentation/virt/kvm/arm/hypercalls.rst
> > +++ b/Documentation/virt/kvm/arm/hypercalls.rst
> > @@ -1,32 +1,32 @@
> >  .. SPDX-License-Identifier: GPL-2.0
> >
> > -=========================================
> > -Power State Coordination Interface (PSCI)
> > -=========================================
> > +=======================
> > +ARM Hypercall Interface
> > +=======================
> >
> > -KVM implements the PSCI (Power State Coordination Interface)
> > -specification in order to provide services such as CPU on/off, reset
> > -and power-off to the guest.
> > +KVM handles the hypercall services as requested by the guests. New hypercall
> > +services are regularly made available by the ARM specification or by KVM (as
> > +vendor services) if they make sense from a virtualization point of view.
> >
> > -The PSCI specification is regularly updated to provide new features,
> > -and KVM implements these updates if they make sense from a virtualization
> > -point of view.
> > -
> > -This means that a guest booted on two different versions of KVM can
> > -observe two different "firmware" revisions. This could cause issues if
> > -a given guest is tied to a particular PSCI revision (unlikely), or if
> > -a migration causes a different PSCI version to be exposed out of the
> > -blue to an unsuspecting guest.
> > +This means that a guest booted on two different versions of KVM can observe
> > +two different "firmware" revisions. This could cause issues if a given guest
> > +is tied to a particular version of a hypercall service, or if a migration
> > +causes a different version to be exposed out of the blue to an unsuspecting
> > +guest.
> >
> >  In order to remedy this situation, KVM exposes a set of "firmware
> >  pseudo-registers" that can be manipulated using the GET/SET_ONE_REG
> >  interface. These registers can be saved/restored by userspace, and set
> > -to a convenient value if required.
> > +to a convenient value as required.
> >
> > -The following register is defined:
> > +The following registers are defined:
> >
> >  * KVM_REG_ARM_PSCI_VERSION:
> >
> > +  KVM implements the PSCI (Power State Coordination Interface)
> > +  specification in order to provide services such as CPU on/off, reset
> > +  and power-off to the guest.
> > +
> >    - Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set
> >      (and thus has already been initialized)
> >    - Returns the current PSCI version on GET_ONE_REG (defaulting to the
> > @@ -74,4 +74,62 @@ The following register is defined:
> >      KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED:
> >        The workaround is always active on this vCPU or it is not needed.
> >
> > -.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf
> > +
> > +Bitmap Feature Firmware Registers
> > +---------------------------------
> > +
> > +Contrary to the above registers, the following registers exposes the hypercall
> > +services in the form of a feature-bitmap to the userspace. This bitmap is
> > +translated to the services that are available to the guest. There is a register
> > +defined per service call owner and can be accessed via GET/SET_ONE_REG interface.
> > +
> > +By default, these registers are set with the upper limit of the features that
> > +are supported. This way userspace can discover all the electable hypercall services
> > +via GET_ONE_REG. The user-space can write-back the desired bitmap back via
> > +SET_ONE_REG. The features for the registers that are untouched, probably because
> > +userspace isn't aware of them, will be exposed as is to the guest.
> > +
> > +Note that KVM would't allow the userspace to configure the registers anymore once
> > +any of the vCPUs has run at least once. Instead, it will return a -EBUSY.
> > +
> > +The psuedo-firmware bitmap register are as follows:
> > +
> > +* KVM_REG_ARM_STD_BMAP:
> > +    Controls the bitmap of the ARM Standard Secure Service Calls.
> > +
> > +  The following bits are accepted:
> > +
> > +    Bit-0: KVM_REG_ARM_STD_BIT_TRNG_V1_0:
> > +      The bit represents the services offered under v1.0 of ARM True Random
> > +      Number Generator (TRNG) specification, ARM DEN0098.
> > +
> > +* KVM_REG_ARM_STD_HYP_BMAP:
> > +    Controls the bitmap of the ARM Standard Hypervisor Service Calls.
> > +
> > +  The following bits are accepted:
> > +
> > +    Bit-0: KVM_REG_ARM_STD_HYP_BIT_PV_TIME:
> > +      The bit represents the Paravirtualized Time service as represented by
> > +      ARM DEN0057A.
> > +
> > +* KVM_REG_ARM_VENDOR_HYP_BMAP:
> > +    Controls the bitmap of the Vendor specific Hypervisor Service Calls.
> > +
> > +  The following bits are accepted:
> > +
> > +    Bit-0: KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT
> > +      The bit represents the ARM_SMCCC_VENDOR_HYP_KVM_FEATURES_FUNC_ID
> > +      function-id
>
> Looking at the code,
> the bit also represents ARM_SMCCC_VENDOR_HYP_CALL_UID_FUNC_ID.
>
You are right, I missed it here in the doc. I'll fix this.

Regards,
Raghavendra

> Thanks,
> Reiji
>
>
> > +
> > +    Bit-1: KVM_REG_ARM_VENDOR_HYP_BIT_PTP:
> > +      The bit represents the Precision Time Protocol KVM service.
> > +
> > +Errors:
> > +
> > +    =======  =============================================================
> > +    -ENOENT   Unknown register accessed.
> > +    -EBUSY    Attempt a 'write' to the register after the VM has started.
> > +    -EINVAL   Invalid bitmap written to the register.
> > +    =======  =============================================================
> > +
> > +.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf
> > \ No newline at end of file
> > --
> > 2.36.0.rc2.479.g8af0fa9b8e-goog
> >

Powered by blists - more mailing lists