[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220425171412.1188485-1-sean.anderson@seco.com>
Date: Mon, 25 Apr 2022 13:14:07 -0400
From: Sean Anderson <sean.anderson@...o.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-usb@...r.kernel.org
Cc: Mike Looijmans <mike.looijmans@...ic.nl>,
Linus Walleij <linus.walleij@...aro.org>,
Jules Maselbas <jmaselbas@...ray.eu>,
Felipe Balbi <balbi@...nel.org>,
Jonathan Hunter <jonathanh@...dia.com>,
linux-kernel@...r.kernel.org,
Robert Jarzmik <robert.jarzmik@...e.fr>,
Sean Anderson <sean.anderson@...o.com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org
Subject: [PATCH v2 0/4] usb: phy: generic: Support enabling/disabling VBUS
The generic USB phy has had VBUS-related code for a long time, but it
has always been broken, since the regulator was never gotten from the
device tree. However, the support itself seems not very useful, since
e.g. usb_phy_vbus_on/off has no users and usb_phy_set_power is only
used by gadgets to make sure they don't draw too much current. Instead,
use the VBUS regulator to implement otg_set_vbus, which is called from
several drivers. This results in a change in semantics of VBUS, but
since support was always broken I don't think this will have any affect.
This got no (non-automated) feedback for an entire release cycle. I'm
sending v2 with a wider CC list so hopefully someone can review it in
time for 5.19.
Changes in v2:
- Fix dt_binding_check errors
Sean Anderson (4):
dt-bindings: usb: usb-nop-xceiv: Repurpose vbus-regulator
usb: phy: generic: Get the vbus supply
usb: phy: generic: Implement otg->set_vbus
usb: phy: generic: Disable vbus on removal
.../bindings/usb/usb-nop-xceiv.yaml | 9 ++-
drivers/usb/phy/phy-generic.c | 55 +++++++++----------
2 files changed, 31 insertions(+), 33 deletions(-)
--
2.35.1.1320.gc452695387.dirty
Powered by blists - more mailing lists