| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8ed3a28d59b442b531e68e95d83b187bb3392940.camel@puri.sm>
Date: Tue, 26 Apr 2022 14:12:48 +0200
From: Martin Kepplinger <martin.kepplinger@...i.sm>
To: Lucas Stach <l.stach@...gutronix.de>,
Adam Ford <aford173@...il.com>, linux-media@...r.kernel.org
Cc: aford@...conembedded.com, cphealy@...il.com,
kernel test robot <lkp@...el.com>,
Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
Philipp Zabel <p.zabel@...gutronix.de>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
linux-rockchip@...ts.infradead.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-staging@...ts.linux.dev
Subject: Re: [PATCH V4 07/11] arm64: dts: imx8mq: Enable both G1 and G2
VPU's with vpu-blk-ctrl
Am Dienstag, dem 26.04.2022 um 12:43 +0200 schrieb Lucas Stach:
> Am Dienstag, dem 26.04.2022 um 09:38 +0200 schrieb Martin Kepplinger:
> > Am Montag, dem 25.04.2022 um 17:34 +0200 schrieb Lucas Stach:
> > > Hi Martin,
> > >
> > > Am Montag, dem 25.04.2022 um 17:22 +0200 schrieb Martin
> > > Kepplinger:
> > > > Am Dienstag, dem 25.01.2022 um 11:11 -0600 schrieb Adam Ford:
> > > > > With the Hantro G1 and G2 now setup to run independently,
> > > > > update
> > > > > the device tree to allow both to operate. This requires the
> > > > > vpu-blk-ctrl node to be configured. Since vpu-blk-ctrl needs
> > > > > certain clock enabled to handle the gating of the G1 and G2
> > > > > fuses, the clock-parents and clock-rates for the various
> > > > > VPU's
> > > > > to be moved into the pgc_vpu because they cannot get re-
> > > > > parented
> > > > > once enabled, and the pgc_vpu is the highest in the chain.
> > > > >
> > > > > Signed-off-by: Adam Ford <aford173@...il.com>
> > > > > Reported-by: kernel test robot <lkp@...el.com>
> > > > > Reviewed-by: Ezequiel Garcia <ezequiel@...guardiasur.com.ar>
> > > > >
> > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > > > b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > > > index 2df2510d0118..549b2440f55d 100644
> > > > > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > > > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
> > > > > @@ -737,7 +737,21 @@ pgc_gpu: power-domain@5 {
> > > > > pgc_vpu: power-
> > > > > domain@6 {
> > > > > #power-
> > > > > domain-
> > > > > cells =
> > > > > <0>;
> > > > > reg =
> > > > > <IMX8M_POWER_DOMAIN_VPU>;
> > > > > - clocks =
> > > > > <&clk
> > > > > IMX8MQ_CLK_VPU_DEC_ROOT>;
> > > > > + clocks =
> > > > > <&clk
> > > > > IMX8MQ_CLK_VPU_DEC_ROOT>,
> > > > > +
> > > > > <&clk
> > > > > IMX8MQ_CLK_VPU_G1_ROOT>,
> > > > > +
> > > > > <&clk
> > > > > IMX8MQ_CLK_VPU_G2_ROOT>;
> > > > > + assigned-
> > > > > clocks =
> > > > > <&clk IMX8MQ_CLK_VPU_G1>,
> > > > > +
> > > > >
> > > > > <&clk IMX8MQ_CLK_VPU_G2>,
> > > > > +
> > > > >
> > > > > <&clk IMX8MQ_CLK_VPU_BUS>,
> > > > > +
> > > > >
> > > > > <&clk IMX8MQ_VPU_PLL_BYPASS>;
> > > > > + assigned-
> > > > > clock-
> > > > > parents = <&clk IMX8MQ_VPU_PLL_OUT>,
> > > > > +
> > > > >
> > > > >
> > > > > <&clk IMX8MQ_VPU_PLL_OUT>,
> > > > > +
> > > > >
> > > > >
> > > > > <&clk IMX8MQ_SYS1_PLL_800M>,
> > > > > +
> > > > >
> > > > >
> > > > > <&clk IMX8MQ_VPU_PLL>;
> > > > > + assigned-
> > > > > clock-
> > > > > rates
> > > > > = <600000000>,
> > > > > +
> > > > >
> > > > >
> > > > > <600000000>,
> > > > > +
> > > > >
> > > > >
> > > > > <800000000>,
> > > > > +
> > > > >
> > > > >
> > > > > <0>;
> > > > > };
> > > > >
> > > > > pgc_disp:
> > > > > power-domain@7
> > > > > {
> > > > > @@ -1457,30 +1471,31 @@ usb3_phy1: usb-phy@...f0040 {
> > > > > status = "disabled";
> > > > > };
> > > > >
> > > > > - vpu: video-codec@...00000 {
> > > > > - compatible = "nxp,imx8mq-vpu";
> > > > > - reg = <0x38300000 0x10000>,
> > > > > - <0x38310000 0x10000>,
> > > > > - <0x38320000 0x10000>;
> > > > > - reg-names = "g1", "g2", "ctrl";
> > > > > - interrupts = <GIC_SPI 7
> > > > > IRQ_TYPE_LEVEL_HIGH>,
> > > > > - <GIC_SPI 8
> > > > > IRQ_TYPE_LEVEL_HIGH>;
> > > > > - interrupt-names = "g1", "g2";
> > > > > + vpu_g1: video-codec@...00000 {
> > > > > + compatible = "nxp,imx8mq-vpu-g1";
> > > > > + reg = <0x38300000 0x10000>;
> > > > > + interrupts = <GIC_SPI 7
> > > > > IRQ_TYPE_LEVEL_HIGH>;
> > > > > + clocks = <&clk
> > > > > IMX8MQ_CLK_VPU_G1_ROOT>;
> > > > > + power-domains = <&vpu_blk_ctrl
> > > > > IMX8MQ_VPUBLK_PD_G1>;
> > > > > + };
> > > > > +
> > > > > + vpu_g2: video-codec@...10000 {
> > > > > + compatible = "nxp,imx8mq-vpu-g2";
> > > > > + reg = <0x38310000 0x10000>;
> > > > > + interrupts = <GIC_SPI 8
> > > > > IRQ_TYPE_LEVEL_HIGH>;
> > > > > + clocks = <&clk
> > > > > IMX8MQ_CLK_VPU_G2_ROOT>;
> > > > > + power-domains = <&vpu_blk_ctrl
> > > > > IMX8MQ_VPUBLK_PD_G2>;
> > > > > + };
> > > > > +
> > > > > + vpu_blk_ctrl: blk-ctrl@...20000 {
> > > > > + compatible = "fsl,imx8mq-vpu-blk-
> > > > > ctrl";
> > > > > + reg = <0x38320000 0x100>;
> > > > > + power-domains = <&pgc_vpu>,
> > > > > <&pgc_vpu>,
> > > > > <&pgc_vpu>;
> > > > > + power-domain-names = "bus", "g1",
> > > > > "g2";
> > > > > clocks = <&clk
> > > > > IMX8MQ_CLK_VPU_G1_ROOT>,
> > > > > - <&clk
> > > > > IMX8MQ_CLK_VPU_G2_ROOT>,
> > > > > - <&clk
> > > > > IMX8MQ_CLK_VPU_DEC_ROOT>;
> > > > > - clock-names = "g1", "g2", "bus";
> > > > > - assigned-clocks = <&clk
> > > > > IMX8MQ_CLK_VPU_G1>,
> > > > > - <&clk
> > > > > IMX8MQ_CLK_VPU_G2>,
> > > > > - <&clk
> > > > > IMX8MQ_CLK_VPU_BUS>,
> > > > > - <&clk
> > > > > IMX8MQ_VPU_PLL_BYPASS>;
> > > > > - assigned-clock-parents = <&clk
> > > > > IMX8MQ_VPU_PLL_OUT>,
> > > > > - <&clk
> > > > > IMX8MQ_VPU_PLL_OUT>,
> > > > > - <&clk
> > > > > IMX8MQ_SYS1_PLL_800M>,
> > > > > - <&clk
> > > > > IMX8MQ_VPU_PLL>;
> > > > > - assigned-clock-rates = <600000000>,
> > > > > <600000000>,
> > > > > - <800000000>,
> > > > > <0>;
> > > > > - power-domains = <&pgc_vpu>;
> > > > > + <&clk
> > > > > IMX8MQ_CLK_VPU_G2_ROOT>;
> > > > > + clock-names = "g1", "g2";
> > > > > + #power-domain-cells = <1>;
> > > > > };
> > > > >
> > > > > pcie0: pcie@...00000 {
> > > >
> > > > With this update, when testing suspend to ram on imx8mq, I get:
> > > >
> > > > buck4: failed to disable: -ETIMEDOUT
> > > >
> > > > where buck4 is power-supply of pgc_vpu. And thus the transition
> > > > to
> > > > suspend (and resuming) fails.
> > > >
> > > > Have you tested system suspend after the imx8m-blk-ctrl update
> > > > on
> > > > imx8mq?
> > >
> > > I haven't tested system suspend, don't know if anyone else did.
> > > However
> > > I guess that this is just uncovering a preexisting issue in the
> > > system
> > > suspend sequencing, which you would also hit if the video
> > > decoders
> > > were
> > > active at system suspend time.
> > >
> > > My guess is that the regulator disable fails, due to the power
> > > domains
> > > being disabled quite late in the suspend sequence, where i2c
> > > communication with the PMIC is no longer possible due to i2c
> > > being
> > > suspended already or something like that. Maybe you can dig in a
> > > bit
> > > on
> > > the actual sequence on your system and we can see how we can
> > > rework
> > > things to suspend the power domains at a time where communication
> > > with
> > > the PMIC is still possible?
> >
> > What exactly would you like to see? Here's all gpcv2 regulators
> > disabling on suspend. (gpu (domain 5) is disabled by runtime pm
> > often):
> >
> > [ 47.138700] imx-pgc imx-pgc-domain.5: disabling regulator
> > [ 47.298071] Freezing user space processes ... (elapsed 0.008
> > seconds) done.
> > [ 47.313432] OOM killer disabled.
> > [ 47.316670] Freezing remaining freezable tasks ... (elapsed
> > 2.221
> > seconds) done.
> > [ 49.672052] imx8m-blk-ctrl 38320000.blk-ctrl:
> > imx8m_blk_ctrl_suspend
> > start
> > [ 49.704417] imx-pgc imx-pgc-domain.0: disabling regulator
> > [ 49.711114] imx-pgc imx-pgc-domain.6: disabling regulator
> > [ 49.819064] buck4: failed to disable: -ETIMEDOUT
> >
> > The stack looks pretty much the same for all of them, from
> > pm_suspend()
> > over genpd_suspend_noiry().
>
> So the GPU domain is already suspended before the system suspend,
> probably due to short runtime PM timeouts.
>
> Can you please check at which point the i2c subsystem is suspended? I
> think we are already past that point when running the PM domain
> suspend
> from a _noirq callback. I'll take a look on how we can properly
> change
> this ordering.
>
> Regards,
> Lucas
>
not sure whether I correctly check that, but the last
i2c_imx_runtime_suspend() (here for i2c1 and i2c3) are executed before
the power-domain disable, so that makes sense(?):
[ 40.774853] imx-pgc imx-pgc-domain.5: disable regulator now
[ 40.786211] imx-i2c 30a20000.i2c: i2c_imx_runtime_suspend
[ 40.910189] imx-i2c 30a40000.i2c: i2c_imx_runtime_suspend
[ 40.940895] Freezing user space processes ...
[ 40.968914] rfkill: input handler enabled
[ 40.979955] (elapsed 0.007 seconds) done.
[ 40.984033] OOM killer disabled.
[ 40.987297] Freezing remaining freezable tasks ... (elapsed 0.001
seconds) done.
[ 41.264683] imx-pgc imx-pgc-domain.0: disable regulator now
[ 41.271679] imx-pgc imx-pgc-domain.6: disable regulator now
[ 41.378759] buck4: failed to disable: -ETIMEDOUT
[ 41.383405] imx-pgc imx-pgc-domain.6: failed to disable regulator: -
110
And you can see that I have the domain.0 regulator set to always-on.
Otherwise it would time out as well in this case:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi#n900
thank a lot for taking the time to look at this!
martin
Powered by blists - more mailing lists