| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 26 Apr 2022 10:21:21 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Christophe Leroy <christophe.leroy@...roup.eu>,
Catalin Marinas <catalin.marinas@....com>,
Steve Capper <steve.capper@....com>,
Will Deacon <will.deacon@....com>,
Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Subject: [PATCH 5.15 080/124] mm, hugetlb: allow for "high" userspace addresses
From: Christophe Leroy <christophe.leroy@...roup.eu>
commit 5f24d5a579d1eace79d505b148808a850b417d4c upstream.
This is a fix for commit f6795053dac8 ("mm: mmap: Allow for "high"
userspace addresses") for hugetlb.
This patch adds support for "high" userspace addresses that are
optionally supported on the system and have to be requested via a hint
mechanism ("high" addr parameter to mmap).
Architectures such as powerpc and x86 achieve this by making changes to
their architectural versions of hugetlb_get_unmapped_area() function.
However, arm64 uses the generic version of that function.
So take into account arch_get_mmap_base() and arch_get_mmap_end() in
hugetlb_get_unmapped_area(). To allow that, move those two macros out
of mm/mmap.c into include/linux/sched/mm.h
If these macros are not defined in architectural code then they default
to (TASK_SIZE) and (base) so should not introduce any behavioural
changes to architectures that do not define them.
For the time being, only ARM64 is affected by this change.
Catalin (ARM64) said
"We should have fixed hugetlb_get_unmapped_area() as well when we added
support for 52-bit VA. The reason for commit f6795053dac8 was to
prevent normal mmap() from returning addresses above 48-bit by default
as some user-space had hard assumptions about this.
It's a slight ABI change if you do this for hugetlb_get_unmapped_area()
but I doubt anyone would notice. It's more likely that the current
behaviour would cause issues, so I'd rather have them consistent.
Basically when arm64 gained support for 52-bit addresses we did not
want user-space calling mmap() to suddenly get such high addresses,
otherwise we could have inadvertently broken some programs (similar
behaviour to x86 here). Hence we added commit f6795053dac8. But we
missed hugetlbfs which could still get such high mmap() addresses. So
in theory that's a potential regression that should have bee addressed
at the same time as commit f6795053dac8 (and before arm64 enabled
52-bit addresses)"
Link: https://lkml.kernel.org/r/ab847b6edb197bffdfe189e70fb4ac76bfe79e0d.1650033747.git.christophe.leroy@csgroup.eu
Fixes: f6795053dac8 ("mm: mmap: Allow for "high" userspace addresses")
Signed-off-by: Christophe Leroy <christophe.leroy@...roup.eu>
Reviewed-by: Catalin Marinas <catalin.marinas@....com>
Cc: Steve Capper <steve.capper@....com>
Cc: Will Deacon <will.deacon@....com>
Cc: <stable@...r.kernel.org> [5.0.x]
Signed-off-by: Andrew Morton <akpm@...ux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@...ux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
fs/hugetlbfs/inode.c | 9 +++++----
include/linux/sched/mm.h | 8 ++++++++
mm/mmap.c | 8 --------
3 files changed, 13 insertions(+), 12 deletions(-)
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -206,7 +206,7 @@ hugetlb_get_unmapped_area_bottomup(struc
info.flags = 0;
info.length = len;
info.low_limit = current->mm->mmap_base;
- info.high_limit = TASK_SIZE;
+ info.high_limit = arch_get_mmap_end(addr);
info.align_mask = PAGE_MASK & ~huge_page_mask(h);
info.align_offset = 0;
return vm_unmapped_area(&info);
@@ -222,7 +222,7 @@ hugetlb_get_unmapped_area_topdown(struct
info.flags = VM_UNMAPPED_AREA_TOPDOWN;
info.length = len;
info.low_limit = max(PAGE_SIZE, mmap_min_addr);
- info.high_limit = current->mm->mmap_base;
+ info.high_limit = arch_get_mmap_base(addr, current->mm->mmap_base);
info.align_mask = PAGE_MASK & ~huge_page_mask(h);
info.align_offset = 0;
addr = vm_unmapped_area(&info);
@@ -237,7 +237,7 @@ hugetlb_get_unmapped_area_topdown(struct
VM_BUG_ON(addr != -ENOMEM);
info.flags = 0;
info.low_limit = current->mm->mmap_base;
- info.high_limit = TASK_SIZE;
+ info.high_limit = arch_get_mmap_end(addr);
addr = vm_unmapped_area(&info);
}
@@ -251,6 +251,7 @@ hugetlb_get_unmapped_area(struct file *f
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
struct hstate *h = hstate_file(file);
+ const unsigned long mmap_end = arch_get_mmap_end(addr);
if (len & ~huge_page_mask(h))
return -EINVAL;
@@ -266,7 +267,7 @@ hugetlb_get_unmapped_area(struct file *f
if (addr) {
addr = ALIGN(addr, huge_page_size(h));
vma = find_vma(mm, addr);
- if (TASK_SIZE - len >= addr &&
+ if (mmap_end - len >= addr &&
(!vma || addr + len <= vm_start_gap(vma)))
return addr;
}
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -106,6 +106,14 @@ static inline void mm_update_next_owner(
#endif /* CONFIG_MEMCG */
#ifdef CONFIG_MMU
+#ifndef arch_get_mmap_end
+#define arch_get_mmap_end(addr) (TASK_SIZE)
+#endif
+
+#ifndef arch_get_mmap_base
+#define arch_get_mmap_base(addr, base) (base)
+#endif
+
extern void arch_pick_mmap_layout(struct mm_struct *mm,
struct rlimit *rlim_stack);
extern unsigned long
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2113,14 +2113,6 @@ unsigned long vm_unmapped_area(struct vm
return addr;
}
-#ifndef arch_get_mmap_end
-#define arch_get_mmap_end(addr) (TASK_SIZE)
-#endif
-
-#ifndef arch_get_mmap_base
-#define arch_get_mmap_base(addr, base) (base)
-#endif
-
/* Get an address range which is currently unmapped.
* For shmat() with addr=0.
*
Powered by blists - more mailing lists