| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2625748.mvXUDI8C0e@jernej-laptop>
Date: Wed, 27 Apr 2022 20:31:32 +0200
From: Jernej Škrabec <jernej.skrabec@...il.com>
To: linux-kernel@...r.kernel.org, linux-media@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
Paul Kocialkowski <paul.kocialkowski@...tlin.com>
Cc: Yong Deng <yong.deng@...ewell.com>,
Paul Kocialkowski <paul.kocialkowski@...tlin.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Samuel Holland <samuel@...lland.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH v4 06/45] media: sun6i-csi: Use runtime pm for clocks and reset
Hi!
Dne petek, 15. april 2022 ob 17:27:32 CEST je Paul Kocialkowski napisal(a):
> Wrap the clock and reset preparation into runtime pm functions
> for better organization of the code. Also fix the clock and
> reset enable order to first deassert reset, as recommended in
> Allwinner litterature.
s/litterature/literature/
Otherwise,
Reviewed-by: Jernej Skrabec <jernej.skrabec@...il.com>
Best regards,
Jernej
>
> Make the driver depend on PM while at it since runtime pm is
> mandatory for the driver to work.
>
> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@...tlin.com>
> ---
> .../media/platform/sunxi/sun6i-csi/Kconfig | 2 +-
> .../platform/sunxi/sun6i-csi/sun6i_csi.c | 84 +++++++++++++------
> 2 files changed, 60 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/media/platform/sunxi/sun6i-csi/Kconfig
> b/drivers/media/platform/sunxi/sun6i-csi/Kconfig index
> 0345901617d4..965fbd937841 100644
> --- a/drivers/media/platform/sunxi/sun6i-csi/Kconfig
> +++ b/drivers/media/platform/sunxi/sun6i-csi/Kconfig
> @@ -2,7 +2,7 @@
> config VIDEO_SUN6I_CSI
> tristate "Allwinner V3s Camera Sensor Interface driver"
> depends on V4L_PLATFORM_DRIVERS
> - depends on VIDEO_DEV && COMMON_CLK && HAS_DMA
> + depends on VIDEO_DEV && COMMON_CLK && HAS_DMA && PM
> depends on ARCH_SUNXI || COMPILE_TEST
> select MEDIA_CONTROLLER
> select VIDEO_V4L2_SUBDEV_API
> diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c index
> 46d92b925cc8..dcc9e7a125e2 100644
> --- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> +++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
> @@ -152,40 +152,18 @@ int sun6i_csi_set_power(struct sun6i_csi_device
> *csi_dev, bool enable)
>
> if (!enable) {
> regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN,
0);
> + pm_runtime_put(dev);
>
> - clk_disable_unprepare(csi_dev->clock_ram);
> - clk_disable_unprepare(csi_dev->clock_mod);
> - reset_control_assert(csi_dev->reset);
> return 0;
> }
>
> - ret = clk_prepare_enable(csi_dev->clock_mod);
> - if (ret) {
> - dev_err(csi_dev->dev, "Enable csi clk err %d\n", ret);
> + ret = pm_runtime_resume_and_get(dev);
> + if (ret < 0)
> return ret;
> - }
> -
> - ret = clk_prepare_enable(csi_dev->clock_ram);
> - if (ret) {
> - dev_err(csi_dev->dev, "Enable clk_dram_csi clk err
%d\n", ret);
> - goto clk_mod_disable;
> - }
> -
> - ret = reset_control_deassert(csi_dev->reset);
> - if (ret) {
> - dev_err(csi_dev->dev, "reset err %d\n", ret);
> - goto clk_ram_disable;
> - }
>
> regmap_update_bits(regmap, CSI_EN_REG, CSI_EN_CSI_EN,
CSI_EN_CSI_EN);
>
> return 0;
> -
> -clk_ram_disable:
> - clk_disable_unprepare(csi_dev->clock_ram);
> -clk_mod_disable:
> - clk_disable_unprepare(csi_dev->clock_mod);
> - return ret;
> }
>
> static enum csi_input_fmt get_csi_input_format(struct sun6i_csi_device
> *csi_dev, @@ -800,6 +778,56 @@ static irqreturn_t sun6i_csi_interrupt(int
> irq, void *private) return IRQ_HANDLED;
> }
>
> +static int sun6i_csi_suspend(struct device *dev)
> +{
> + struct sun6i_csi_device *csi_dev = dev_get_drvdata(dev);
> +
> + reset_control_assert(csi_dev->reset);
> + clk_disable_unprepare(csi_dev->clock_ram);
> + clk_disable_unprepare(csi_dev->clock_mod);
> +
> + return 0;
> +}
> +
> +static int sun6i_csi_resume(struct device *dev)
> +{
> + struct sun6i_csi_device *csi_dev = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = reset_control_deassert(csi_dev->reset);
> + if (ret) {
> + dev_err(dev, "failed to deassert reset\n");
> + return ret;
> + }
> +
> + ret = clk_prepare_enable(csi_dev->clock_mod);
> + if (ret) {
> + dev_err(dev, "failed to enable module clock\n");
> + goto error_reset;
> + }
> +
> + ret = clk_prepare_enable(csi_dev->clock_ram);
> + if (ret) {
> + dev_err(dev, "failed to enable ram clock\n");
> + goto error_clock_mod;
> + }
> +
> + return 0;
> +
> +error_clock_mod:
> + clk_disable_unprepare(csi_dev->clock_mod);
> +
> +error_reset:
> + reset_control_assert(csi_dev->reset);
> +
> + return ret;
> +}
> +
> +static const struct dev_pm_ops sun6i_csi_pm_ops = {
> + .runtime_suspend = sun6i_csi_suspend,
> + .runtime_resume = sun6i_csi_resume,
> +};
> +
> static const struct regmap_config sun6i_csi_regmap_config = {
> .reg_bits = 32,
> .reg_stride = 4,
> @@ -879,6 +907,10 @@ static int sun6i_csi_resources_setup(struct
> sun6i_csi_device *csi_dev, goto error_clock_rate_exclusive;
> }
>
> + /* Runtime PM */
> +
> + pm_runtime_enable(dev);
> +
> return 0;
>
> error_clock_rate_exclusive:
> @@ -889,6 +921,7 @@ static int sun6i_csi_resources_setup(struct
> sun6i_csi_device *csi_dev,
>
> static void sun6i_csi_resources_cleanup(struct sun6i_csi_device *csi_dev)
> {
> + pm_runtime_disable(csi_dev->dev);
> clk_rate_exclusive_put(csi_dev->clock_mod);
> }
>
> @@ -971,6 +1004,7 @@ static struct platform_driver sun6i_csi_platform_driver
> = { .driver = {
> .name = SUN6I_CSI_NAME,
> .of_match_table =
of_match_ptr(sun6i_csi_of_match),
> + .pm = &sun6i_csi_pm_ops,
> },
> };
Powered by blists - more mailing lists