linux-kernel - [PATCH v22 2/2] arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220426170306.v22.2.I18481b296484eec47bdc292a31fa46fa8c655ca9@changeid>
Date:   Tue, 26 Apr 2022 17:03:23 -0700
From:   Matthias Kaehlcke <mka@...omium.org>
To:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Douglas Anderson <dianders@...omium.org>,
        Stephen Boyd <swboyd@...omium.org>
Cc:     Matthias Kaehlcke <mka@...omium.org>
Subject: [PATCH v22 2/2] arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub

Add nodes for the onboard USB hub on herobrine devices. Remove the
'always-on' property from the hub regulator, since the regulator
is now managed by the onboard_usb_hub driver.

Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
---

Changes in v22:
- patch added to the series

 .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi | 21 ++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index d58045dd7334..46937d21b229 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -143,8 +143,8 @@ pp3300_hub: pp3300-hub-regulator {
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 
+		/* The BIOS leaves this regulator on */
 		regulator-boot-on;
-		regulator-always-on;
 
 		gpio = <&tlmm 157 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
@@ -560,6 +560,25 @@ &usb_1 {
 
 &usb_1_dwc3 {
 	dr_mode = "host";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.x hub on port 1 */
+	usb_hub_2_x: hub@1 {
+		compatible = "usbbda,5411";
+		reg = <1>;
+		vdd-supply = <&pp3300_hub>;
+		companion-hub = <&usb_hub_3_x>;
+	};
+
+	/* 3.x hub on port 2 */
+	usb_hub_3_x: hub@2 {
+		compatible = "usbbda,411";
+		reg = <2>;
+		vdd-supply = <&pp3300_hub>;
+		companion-hub = <&usb_hub_2_x>;
+	};
 };
 
 &usb_1_hsphy {
-- 
2.36.0.rc2.479.g8af0fa9b8e-goog