linux-kernel - [PATCH 4/4] arm64: dts: ti: k3-am625-sk: Add DSS ports, HDMI tx & peripherals

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220427090850.32280-5-a-bhatia1@ti.com>
Date:   Wed, 27 Apr 2022 14:38:50 +0530
From:   Aradhya Bhatia <a-bhatia1@...com>
To:     Vignesh Raghavendra <vigneshr@...com>
CC:     Nishanth Menon <nm@...com>, Rob Herring <robh+dt@...nel.org>,
        Linux ARM Kernel List <linux-arm-kernel@...ts.infradead.org>,
        Devicetree List <devicetree@...r.kernel.org>,
        Linux Kernel List <linux-kernel@...r.kernel.org>,
        Aradhya Bhatia <a-bhatia1@...com>
Subject: [PATCH 4/4] arm64: dts: ti: k3-am625-sk: Add DSS ports, HDMI tx & peripherals

Add DT nodes for sil9022 HDMI transmitter (tx), HDMI connector and the
HDMI fixed master clock on the am625-sk board.

Additionally, add and connect output port for DSS (vp2), input and output
ports for the sil9022 HDMI tx and the input port for the HDMI connector.

The sil9022 HDMI tx is connected on the i2c1 bus. The HDMI connector on
the board is of type "a". The clock frequency of the master clock that
supports the HDMI tx is 12.288 MHz.

The dpi output signals from the vp2 of DSS are fed into the sil9022 HDMI
transmitter. These signals are converted into HDMI signals which are
further passed on to the HDMI connector on the board, on which display
can be connected via appropriate HDMI cables.

Signed-off-by: Aradhya Bhatia <a-bhatia1@...com>
---
 arch/arm64/boot/dts/ti/k3-am625-sk.dts | 63 ++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index 96414c5dacf7..9567fa4a447b 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -134,6 +134,23 @@ led-0 {
 			default-state = "off";
 		};
 	};
+
+	hdmi_mstrclk: hdmi-mstrclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <12288000>;
+	};
+
+	hdmi: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
 };
 
 &main_pmx0 {
@@ -385,6 +402,38 @@ exp1: gpio@22 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
 	};
+
+	sii9022: sii9022@3b {
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+
+		clocks = <&hdmi_mstrclk>;
+		clock-names = "mclk";
+
+		interrupt-parent = <&exp1>;
+		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi1_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &main_i2c2 {
@@ -450,6 +499,20 @@ &dss {
 	pinctrl-0 = <&main_dss0_pins_default>;
 };
 
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* VP2: DPI Output */
+	port@1 {
+		reg = <1>;
+
+		dpi1_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+		};
+	};
+};
+
 &mailbox0_cluster0 {
 	mbox_m4_0: mbox-m4-0 {
 		ti,mbox-rx = <0 0 0>;
-- 
2.36.0