[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220428230933.15262-3-andre.przywara@arm.com>
Date: Fri, 29 Apr 2022 00:09:29 +0100
From: Andre Przywara <andre.przywara@....com>
To: Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>,
Chen-Yu Tsai <wens@...e.org>
Cc: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Icenowy Zheng <icenowy@...c.io>,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Stephen Boyd <sboyd@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
linux-clk@...r.kernel.org
Subject: [PATCH v11 2/6] clk: sunxi-ng: h616: Add PLL derived 32KHz clock
The RTC section of the H616 manual mentions in a half-sentence the
existence of a clock "32K divided by PLL_PERI(2X)". This is used as
one of the possible inputs for the mux that selects the clock for the
32 KHz fanout pad. On the H616 this is routed to pin PG10, and some
boards use that clock output to compensate for a missing 32KHz crystal.
On the OrangePi Zero2 this is for instance connected to the LPO pin of
the WiFi/BT chip.
The new RTC clock binding requires this clock to be named as one input
clock, so we need to expose this to the DT. In contrast to the D1 SoC
there does not seem to be a gate for this clock, so just use a fixed
divider clock, using a newly assigned clock number.
Signed-off-by: Andre Przywara <andre.przywara@....com>
Reviewed-by: Samuel Holland <samuel@...lland.org>
---
drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 8 ++++++++
drivers/clk/sunxi-ng/ccu-sun50i-h616.h | 2 +-
include/dt-bindings/clock/sun50i-h616-ccu.h | 1 +
3 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
index 49a2474cf314..21e918582aa5 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
@@ -704,6 +704,13 @@ static CLK_FIXED_FACTOR_HWS(pll_periph0_2x_clk, "pll-periph0-2x",
pll_periph0_parents,
1, 2, 0);
+static const struct clk_hw *pll_periph0_2x_hws[] = {
+ &pll_periph0_2x_clk.hw
+};
+
+static CLK_FIXED_FACTOR_HWS(pll_system_32k_clk, "pll-system-32k",
+ pll_periph0_2x_hws, 36621, 1, 0);
+
static const struct clk_hw *pll_periph1_parents[] = {
&pll_periph1_clk.common.hw
};
@@ -852,6 +859,7 @@ static struct clk_hw_onecell_data sun50i_h616_hw_clks = {
[CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
[CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
[CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
+ [CLK_PLL_SYSTEM_32K] = &pll_system_32k_clk.hw,
[CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
[CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
[CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.h b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h
index dd671b413f22..fdd2f4d5103f 100644
--- a/drivers/clk/sunxi-ng/ccu-sun50i-h616.h
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h
@@ -51,6 +51,6 @@
#define CLK_BUS_DRAM 56
-#define CLK_NUMBER (CLK_BUS_HDCP + 1)
+#define CLK_NUMBER (CLK_PLL_SYSTEM_32K + 1)
#endif /* _CCU_SUN50I_H616_H_ */
diff --git a/include/dt-bindings/clock/sun50i-h616-ccu.h b/include/dt-bindings/clock/sun50i-h616-ccu.h
index 4fc08b0df2f3..1191aca53ac6 100644
--- a/include/dt-bindings/clock/sun50i-h616-ccu.h
+++ b/include/dt-bindings/clock/sun50i-h616-ccu.h
@@ -111,5 +111,6 @@
#define CLK_BUS_TVE0 125
#define CLK_HDCP 126
#define CLK_BUS_HDCP 127
+#define CLK_PLL_SYSTEM_32K 128
#endif /* _DT_BINDINGS_CLK_SUN50I_H616_H_ */
--
2.35.3
Powered by blists - more mailing lists