linux-kernel - [PATCH v2 4/5] regulator: pca9450: Make warm reset on WDOG

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220429072211.24957-4-rickaran@axis.com>
Date:   Fri, 29 Apr 2022 09:22:10 +0200
From:   Rickard Andersson <rickaran@...s.com>
To:     <lgirdwood@...il.com>, <broonie@...nel.org>,
        <linux-kernel@...r.kernel.org>
CC:     <rickaran@...s.com>, <rickard314.andersson@...il.com>,
        <perdo@...s.com>
Subject: [PATCH v2 4/5] regulator: pca9450: Make warm reset on WDOG_B assertion

From: Rickard x Andersson <rickaran@...s.com>

The default configuration of the PMIC behavior makes the PMIC
power cycle most regulators on WDOG_B assertion. This power
cycling causes the memory contents of OCRAM to be lost.
Some systems neeeds some memory that survives reset and
reboot, therefore this patch is created.

Signed-off-by: Rickard x Andersson <rickaran@...s.com>
---
 drivers/regulator/pca9450-regulator.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index 87b4e6e29ba1..4a3ae73c600c 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -702,6 +702,7 @@ static int pca9450_i2c_probe(struct i2c_client *i2c,
 	struct regulator_config config = { };
 	struct pca9450 *pca9450;
 	unsigned int device_id, i;
+	unsigned int reset_ctrl;
 	int ret;
 
 	if (!i2c->irq) {
@@ -802,9 +803,14 @@ static int pca9450_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
+	if (of_property_read_bool(i2c->dev.of_node, "nxp,wdog_b-warm-reset"))
+		reset_ctrl = WDOG_B_CFG_WARM;
+	else
+		reset_ctrl = WDOG_B_CFG_COLD_LDO12;
+
 	/* Set reset behavior on assertion of WDOG_B signal */
 	ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL,
-				WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12);
+				 WDOG_B_CFG_MASK, reset_ctrl);
 	if (ret) {
 		dev_err(&i2c->dev, "Failed to set WDOG_B reset behavior\n");
 		return ret;
-- 
2.20.1