linux-kernel - [PATCH 05/14] arm64: dts: qcom: msm8998-yoshino: Add USB extcon

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220430162353.607709-5-konrad.dybcio@somainline.org>
Date:   Sat, 30 Apr 2022 18:23:43 +0200
From:   Konrad Dybcio <konrad.dybcio@...ainline.org>
To:     ~postmarketos/upstreaming@...ts.sr.ht
Cc:     martin.botka@...ainline.org,
        angelogioacchino.delregno@...ainline.org,
        marijn.suijten@...ainline.org, jamipkettunen@...ainline.org,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 05/14] arm64: dts: qcom: msm8998-yoshino: Add USB extcon

While not strictly necessary, at least on maple, configure the USB extcon,
which requires two pins on Yoshino.

Signed-off-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
---
 .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 24 +++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index fd65dee55626..170cd2df3e5e 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -91,6 +91,14 @@ vph_pwr: vph-pwr-regulator {
 		regulator-boot-on;
 	};
 
+	extcon_usb: extcon-usb {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+		vbus-gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_extcon_active &usb_vbus_active>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		label = "Side buttons";
@@ -644,6 +652,13 @@ cam1_vdig_default: cam1-vdig-default {
 		drive-strength = <2>;
 	};
 
+	usb_extcon_active: usb-extcon-active {
+		pins = "gpio38";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <16>;
+	};
+
 	hall_sensor0_default: acc-cover-open {
 		pins = "gpio124";
 		function = "gpio";
@@ -659,6 +674,14 @@ ts_int_n: ts-int-n {
 		bias-pull-up;
 	};
 
+	usb_vbus_active: usb-vbus-active {
+		pins = "gpio128";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+		output-low;
+	};
+
 	ts_vddio_en: ts-vddio-en-default {
 		pins = "gpio133";
 		function = "gpio";
@@ -689,6 +712,7 @@ &usb3 {
 &usb3_dwc3 {
 	/* Force to peripheral until we have Type-C hooked up */
 	dr_mode = "peripheral";
+	extcon = <&extcon_usb>;
 };
 
 &usb3phy {
-- 
2.35.2