linux-kernel - Re: [PATCH v4 0/4] mainline Protonic PRTT1x boards

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <b86e02aa-ecee-b159-e4c7-b562afefb0ed@foss.st.com>
Date:   Mon, 2 May 2022 10:40:59 +0200
From:   Alexandre TORGUE <alexandre.torgue@...s.st.com>
To:     Oleksij Rempel <o.rempel@...gutronix.de>,
        Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzk+dt@...nel.org>,
        Jérôme Pouiller <jerome.pouiller@...abs.com>
CC:     <kernel@...gutronix.de>, <linux-kernel@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v4 0/4] mainline Protonic PRTT1x boards

Hi Oleksij

On 4/26/22 09:35, Oleksij Rempel wrote:
> changes v4:
> - reorder prtt1X compatible again
> - remove spaces in stm32mp151a-prtt1c.dts
> 
> changes v3:
> - add silabs,wfx compatible
> - move spi pin configuration to stm32mp15-pinctrl.dtsi
> - move prtt1X compatible in alphabetical order
> - add watchdog and thermal nodes
> 
> changes v2:
> - cleanup mmc nodes
> - disabled dma for uart4 (this is console interface and it should work
>    as simple as possible)
> 
> Oleksij Rempel (4):
>    dt-bindings: arm: stm32: Add compatible strings for Protonic T1L
>      boards
>    dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
>    ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
>    ARM: dts: stm32: add support for Protonic PRTT1x boards
> 
>   .../devicetree/bindings/arm/stm32/stm32.yaml  |   8 +
>   .../staging/net/wireless/silabs,wfx.yaml      |   1 +
>   arch/arm/boot/dts/Makefile                    |   3 +
>   arch/arm/boot/dts/stm32mp15-pinctrl.dtsi      |  15 +
>   arch/arm/boot/dts/stm32mp151a-prtt1a.dts      |  52 +++
>   arch/arm/boot/dts/stm32mp151a-prtt1c.dts      | 304 ++++++++++++++++++
>   arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi     | 229 +++++++++++++
>   arch/arm/boot/dts/stm32mp151a-prtt1s.dts      |  63 ++++
>   8 files changed, 675 insertions(+)
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1a.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1c.dts
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1l.dtsi
>   create mode 100644 arch/arm/boot/dts/stm32mp151a-prtt1s.dts
> 

Series applied on stm32-next.

Regards
Alex