linux-kernel - [PATCH v2 0/4] iommu: M1 Pro/Max DART support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220503062301.20872-1-j@jannau.net>
Date:   Tue,  3 May 2022 08:22:57 +0200
From:   Janne Grunau <j@...nau.net>
To:     iommu@...ts.linux-foundation.org
Cc:     Sven Peter <sven@...npeter.dev>,
        Alyssa Rosenzweig <alyssa@...enzweig.io>,
        Hector Martin <marcan@...can.st>,
        Mark Kettenis <mark.kettenis@...all.nl>,
        Joerg Roedel <joro@...tes.org>, Will Deacon <will@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Robin Murphy <robin.murphy@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v2 0/4] iommu: M1 Pro/Max DART support

Hej,

I've taken over this series to add support for DART on M1 Pro/Max from
Sven.

Since v1 we have discovered further differences in the PTE format. It
has four differences which makes it incompatible with the one in the
M1:

  - the physical addresses are shifted left by 4 bits and and have 2 more
    bits inside the PTE entries
  - the read/write protection flags are at a different position
  - the subpage protection feature is now mandatory. For Linux we can
    just configure it to always allow access to the entire page.
  - BIT(1) tags "uncached" mappings (used for the display controller)

The last difference is the most troublesome since it makes the PTE format
incomaptible with iopte_type(). Handling this inside io-pgtable-arm.c
seems manageable since DART supports just a single block size. It opens
the question at which point we decide that DART uses its own
io_pgtable_ops.

There is second type of DART (t8110) present on M1 Pro/Max SoCs which
uses the same PTE format as t6000.

Janne

Sven Peter (4):
  dt-bindings: iommu: dart: add t6000 compatible
  iommu/io-pgtable: Add DART subpage protection support
  iommu/io-pgtable: Add DART PTE support for t6000
  iommu: dart: Support t6000 variant

 .../devicetree/bindings/iommu/apple,dart.yaml |  4 +-
 drivers/iommu/apple-dart.c                    | 24 +++++-
 drivers/iommu/io-pgtable-arm.c                | 76 ++++++++++++++++++-
 drivers/iommu/io-pgtable.c                    |  1 +
 include/linux/io-pgtable.h                    |  3 +
 5 files changed, 101 insertions(+), 7 deletions(-)


base-commit: 3123109284176b1532874591f7c81f3837bbdc17
-- 
2.35.1