[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220503154259.1166203-1-foss+kernel@0leil.net>
Date: Tue, 3 May 2022 17:42:57 +0200
From: Quentin Schulz <foss+kernel@...il.net>
To: unlisted-recipients:; (no To-header on input)
Cc: shawnx.tu@...el.com, mchehab@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Quentin Schulz <quentin.schulz@...obroma-systems.com>,
Quentin Schulz <foss+kernel@...il.net>
Subject: [PATCH 1/3] media: dt-bindings: ov5675: document YAML binding
From: Quentin Schulz <quentin.schulz@...obroma-systems.com>
This patch adds documentation of device tree in YAML schema for the
OV5675 CMOS image sensor from Omnivision.
Cc: Quentin Schulz <foss+kernel@...il.net>
Signed-off-by: Quentin Schulz <quentin.schulz@...obroma-systems.com>
---
.../bindings/media/i2c/ovti,ov5675.yaml | 137 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 138 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
new file mode 100644
index 000000000000..d009cba539a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov5675.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5675 CMOS Sensor Device Tree Bindings
+
+maintainers:
+ - Quentin Schulz <quentin.schulz@...obroma-systems.com>
+
+description: |-
+ The Omnivision OV5675 is a high performance, 1/5-inch, 5 megapixel, CMOS
+ image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
+ sub-sampled, and windowed 10-bit MIPI images in various formats via the
+ Serial Camera Control Bus (SCCB) interface. This chip is programmable
+ through I2C and two-wire SCCB. The sensor output is available via CSI-2
+ serial data output (up to 2-lane).
+
+properties:
+ compatible:
+ const: ovti,ov5675
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ description:
+ Input clock for the sensor.
+ items:
+ - const: xvclk
+
+ clock-frequency:
+ description:
+ Frequency of the xvclk clock in Hertz.
+
+ dovdd-supply:
+ description:
+ Definition of the regulator used as interface power supply.
+
+ avdd-supply:
+ description:
+ Definition of the regulator used as analog power supply.
+
+ dvdd-supply:
+ description:
+ Definition of the regulator used as digital power supply.
+
+ reset-gpios:
+ description:
+ The phandle and specifier for the GPIO that controls sensor reset.
+ This corresponds to the hardware pin XSHUTDOWN which is physically
+ active low.
+
+ port:
+ type: object
+ additionalProperties: false
+ description:
+ A node containing an output port node with an endpoint definition
+ as documented in
+ Documentation/devicetree/bindings/media/video-interfaces.txt
+
+ properties:
+ endpoint:
+ type: object
+
+ properties:
+ data-lanes:
+ description: |-
+ The driver only supports 2-lane operation.
+ items:
+ - const: 1
+ - const: 2
+
+ link-frequencies:
+ $ref: /schemas/types.yaml#/definitions/uint64-array
+ description:
+ Allowed data bus frequencies. 450000000Hz is supported by the driver.
+
+ required:
+ - link-frequencies
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - clock-frequency
+ - dovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - port
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov5675: camera@36 {
+ compatible = "ovti,ov5675";
+ reg = <0x36>;
+
+ reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cif_clkout_m0>;
+
+ clocks = <&cru SCLK_CIF_OUT>;
+ clock-names = "xvclk";
+ clock-frequency = <19200000>;
+
+ avdd-supply = <&vcc_1v8>;
+ dvdd-supply = <&vcc_1v8>;
+ dovdd-supply = <&vcc_2v8>;
+
+ port {
+ ucam_out: endpoint {
+ remote-endpoint = <&mipi_in_ucam>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <450000000>;
+ };
+ };
+ };
+ };
+...
+
diff --git a/MAINTAINERS b/MAINTAINERS
index edc96cdb85e8..94ff31268c3d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14550,6 +14550,7 @@ M: Shawn Tu <shawnx.tu@...el.com>
L: linux-media@...r.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
F: drivers/media/i2c/ov5675.c
OMNIVISION OV5693 SENSOR DRIVER
--
2.35.1
Powered by blists - more mailing lists