linux-kernel - [PATCH 5.15 001/177] usb: mtu3: fix USB 3.0 dual-role-switch from device to host

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20220504153053.958173430@linuxfoundation.org>
Date:   Wed,  4 May 2022 18:43:14 +0200
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Fabien Parent <fparent@...libre.com>,
        Chunfeng Yun <chunfeng.yun@...iatek.com>,
        Macpaul Lin <macpaul.lin@...iatek.com>,
        Tainping Fang <tianping.fang@...iatek.com>
Subject: [PATCH 5.15 001/177] usb: mtu3: fix USB 3.0 dual-role-switch from device to host

From: Macpaul Lin <macpaul.lin@...iatek.com>

commit 456244aeecd54249096362a173dfe06b82a5cafa upstream.

Issue description:
  When an OTG port has been switched to device role and then switch back
  to host role again, the USB 3.0 Host (XHCI) will not be able to detect
  "plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed)
  devices until system reboot.

Root cause and Solution:
  There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in
  toggle_opstate(). At the end of role switch procedure, toggle_opstate()
  will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was
  set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN
  will be skipped hence caused the port cannot detect connected USB 2.0
  (Highspeed and Fullspeed) devices. Simply remove the condition check to
  solve this issue.

Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support")
Cc: stable@...r.kernel.org
Tested-by: Fabien Parent <fparent@...libre.com>
Reviewed-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@...iatek.com>
Signed-off-by: Tainping Fang <tianping.fang@...iatek.com>
Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/usb/mtu3/mtu3_dr.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/usb/mtu3/mtu3_dr.c
+++ b/drivers/usb/mtu3/mtu3_dr.c
@@ -21,10 +21,8 @@ static inline struct ssusb_mtk *otg_sx_t

 static void toggle_opstate(struct ssusb_mtk *ssusb)
 {
-	if (!ssusb->otg_switch.is_u3_drd) {
-		mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
-		mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
-	}
+	mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
+	mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
 }

 /* only port0 supports dual-role mode */