[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220504153058.558589545@linuxfoundation.org>
Date: Wed, 4 May 2022 18:44:15 +0200
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Benoit Parrot <bparrot@...com>,
Kevin Hilman <khilman@...libre.com>,
Tony Lindgren <tony@...mide.com>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.15 062/177] ARM: dts: dra7: Fix suspend warning for vpe powerdomain
From: Tony Lindgren <tony@...mide.com>
[ Upstream commit 8d2453d9a307c2eafd21242dd73f35f05fb7ce74 ]
We currently are getting the following warning after a system suspend:
Powerdomain (vpe_pwrdm) didn't enter target state 0
Looks like this is because the STANDBYMODE bit for SMART_IDLE should
not be used. The TRM "Table 12-348. VPE_SYSCONFIG" says that the value
for SMART_IDLE is "0x2: Same behavior as bit-field value of 0x1". But
if the SMART_IDLE value is used, PM_VPE_PWRSTST LASTPOWERSTATEENTERED
bits always show value of 3.
Let's fix the issue by dropping SMART_IDLE for vpe. And let's also add
the missing the powerdomain for vpe.
Fixes: 1a2095160594 ("ARM: dts: dra7: Add ti-sysc node for VPE")
Cc: Benoit Parrot <bparrot@...com>
Reported-by: Kevin Hilman <khilman@...libre.com>
Reviewed-by: Kevin Hilman <khilman@...libre.com>
Tested-by: Kevin Hilman <khilman@...libre.com>
Signed-off-by: Tony Lindgren <tony@...mide.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
arch/arm/boot/dts/dra7-l4.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 0a11bacffc1f..5733e3a4ea8e 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -4188,11 +4188,11 @@ target-module@...010 { /* 0x489d0000, ap 27 30.0 */
reg = <0x1d0010 0x4>;
reg-names = "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>;
+ <SYSC_IDLE_NO>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
+ power-domains = <&prm_vpe>;
clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
--
2.35.1
Powered by blists - more mailing lists