| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8c3592767ac4c3d4c3bcb0294d97aff5a7375319.camel@redhat.com>
Date: Wed, 04 May 2022 14:49:52 -0400
From: Lyude Paul <lyude@...hat.com>
To: Karol Herbst <kherbst@...hat.com>
Cc: nouveau <nouveau@...ts.freedesktop.org>,
dri-devel <dri-devel@...ts.freedesktop.org>,
Ben Skeggs <bskeggs@...hat.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] drm/nouveau/subdev/bus: Ratelimit logging for fault
errors
On Tue, 2022-05-03 at 21:23 +0200, Karol Herbst wrote:
> not able to hit any error on my machine, but regardless:
>
> Reviewed-by: Karol Herbst <kherbst@...hat.com>
>
> I suspect there are more places where we could put it, but we can add
> those later.
>
> Anyway, I think it's valuable to push it through fixes, not sure how
> far back we want to CC stable though.
JFYI - dim fixes can figure this out if you just give it the commit that
introduced the issue.
Anyway, will push this upstream in a moment
>
> On Fri, Apr 29, 2022 at 9:54 PM Lyude Paul <lyude@...hat.com> wrote:
> >
> > There's plenty of ways to fudge the GPU when developing on nouveau by
> > mistake, some of which can result in nouveau seriously spamming dmesg with
> > fault errors. This can be somewhat annoying, as it can quickly overrun the
> > message buffer (or your terminal emulator's buffer) and get rid of
> > actually
> > useful feedback from the driver. While working on my new atomic only MST
> > branch, I ran into this issue a couple of times.
> >
> > So, let's fix this by adding nvkm_error_ratelimited(), and using it to
> > ratelimit errors from faults. This should be fine for developers, since
> > it's nearly always only the first few faults that we care about seeing.
> > Plus, you can turn off rate limiting in the kernel if you really need to.
> >
> > Signed-off-by: Lyude Paul <lyude@...hat.com>
> > ---
> > drivers/gpu/drm/nouveau/include/nvkm/core/subdev.h | 2 ++
> > drivers/gpu/drm/nouveau/nvkm/subdev/bus/gf100.c | 14 +++++++-------
> > drivers/gpu/drm/nouveau/nvkm/subdev/bus/nv31.c | 6 +++---
> > drivers/gpu/drm/nouveau/nvkm/subdev/bus/nv50.c | 6 +++---
> > 4 files changed, 15 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/nouveau/include/nvkm/core/subdev.h
> > b/drivers/gpu/drm/nouveau/include/nvkm/core/subdev.h
> > index 1665738948fb..96113c8bee8c 100644
> > --- a/drivers/gpu/drm/nouveau/include/nvkm/core/subdev.h
> > +++ b/drivers/gpu/drm/nouveau/include/nvkm/core/subdev.h
> > @@ -62,4 +62,6 @@ void nvkm_subdev_intr(struct nvkm_subdev *);
> > #define nvkm_debug(s,f,a...) nvkm_printk((s), DEBUG, info, f, ##a)
> > #define nvkm_trace(s,f,a...) nvkm_printk((s), TRACE, info, f, ##a)
> > #define nvkm_spam(s,f,a...) nvkm_printk((s), SPAM, dbg, f, ##a)
> > +
> > +#define nvkm_error_ratelimited(s,f,a...) nvkm_printk((s), ERROR,
> > err_ratelimited, f, ##a)
> > #endif
> > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bus/gf100.c
> > b/drivers/gpu/drm/nouveau/nvkm/subdev/bus/gf100.c
> > index 53a6651ac225..80b5aaceeaad 100644
> > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/bus/gf100.c
> > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bus/gf100.c
> > @@ -35,13 +35,13 @@ gf100_bus_intr(struct nvkm_bus *bus)
> > u32 addr = nvkm_rd32(device, 0x009084);
> > u32 data = nvkm_rd32(device, 0x009088);
> >
> > - nvkm_error(subdev,
> > - "MMIO %s of %08x FAULT at %06x [ %s%s%s]\n",
> > - (addr & 0x00000002) ? "write" : "read", data,
> > - (addr & 0x00fffffc),
> > - (stat & 0x00000002) ? "!ENGINE " : "",
> > - (stat & 0x00000004) ? "PRIVRING " : "",
> > - (stat & 0x00000008) ? "TIMEOUT " : "");
> > + nvkm_error_ratelimited(subdev,
> > + "MMIO %s of %08x FAULT at %06x [
> > %s%s%s]\n",
> > + (addr & 0x00000002) ? "write" :
> > "read", data,
> > + (addr & 0x00fffffc),
> > + (stat & 0x00000002) ? "!ENGINE " :
> > "",
> > + (stat & 0x00000004) ? "PRIVRING " :
> > "",
> > + (stat & 0x00000008) ? "TIMEOUT " :
> > "");
> >
> > nvkm_wr32(device, 0x009084, 0x00000000);
> > nvkm_wr32(device, 0x001100, (stat & 0x0000000e));
> > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bus/nv31.c
> > b/drivers/gpu/drm/nouveau/nvkm/subdev/bus/nv31.c
> > index ad8da523bb22..c75e463f3501 100644
> > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/bus/nv31.c
> > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bus/nv31.c
> > @@ -45,9 +45,9 @@ nv31_bus_intr(struct nvkm_bus *bus)
> > u32 addr = nvkm_rd32(device, 0x009084);
> > u32 data = nvkm_rd32(device, 0x009088);
> >
> > - nvkm_error(subdev, "MMIO %s of %08x FAULT at %06x\n",
> > - (addr & 0x00000002) ? "write" : "read", data,
> > - (addr & 0x00fffffc));
> > + nvkm_error_ratelimited(subdev, "MMIO %s of %08x FAULT at
> > %06x\n",
> > + (addr & 0x00000002) ? "write" :
> > "read", data,
> > + (addr & 0x00fffffc));
> >
> > stat &= ~0x00000008;
> > nvkm_wr32(device, 0x001100, 0x00000008);
> > diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bus/nv50.c
> > b/drivers/gpu/drm/nouveau/nvkm/subdev/bus/nv50.c
> > index 3a1e45adeedc..2055d0b100d3 100644
> > --- a/drivers/gpu/drm/nouveau/nvkm/subdev/bus/nv50.c
> > +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bus/nv50.c
> > @@ -60,9 +60,9 @@ nv50_bus_intr(struct nvkm_bus *bus)
> > u32 addr = nvkm_rd32(device, 0x009084);
> > u32 data = nvkm_rd32(device, 0x009088);
> >
> > - nvkm_error(subdev, "MMIO %s of %08x FAULT at %06x\n",
> > - (addr & 0x00000002) ? "write" : "read", data,
> > - (addr & 0x00fffffc));
> > + nvkm_error_ratelimited(subdev, "MMIO %s of %08x FAULT at
> > %06x\n",
> > + (addr & 0x00000002) ? "write" :
> > "read", data,
> > + (addr & 0x00fffffc));
> >
> > stat &= ~0x00000008;
> > nvkm_wr32(device, 0x001100, 0x00000008);
> > --
> > 2.35.1
> >
>
--
Cheers,
Lyude Paul (she/her)
Software Engineer at Red Hat
Powered by blists - more mailing lists