[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220504130617.331290-4-valentin.caron@foss.st.com>
Date: Wed, 4 May 2022 15:06:16 +0200
From: Valentin Caron <valentin.caron@...s.st.com>
To: Alessandro Zummo <a.zummo@...ertech.it>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Alexandre Torgue <alexandre.torgue@...s.st.com>
CC: Gabriel Fernandez <gabriel.fernandez@...s.st.com>,
Amelie Delaunay <amelie.delaunay@...s.st.com>,
Valentin Caron <valentin.caron@...s.st.com>,
<linux-rtc@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 5/6] ARM: dts: stm32: add RTC LSCO support on stm32mp157c-dk2
From: Gabriel Fernandez <gabriel.fernandez@...s.st.com>
Add LSCO support on stm32mp157c-dk2 board. LSCO output is mapped on
RTC_OUT2_RMP (PI8), directly routed on LPO_IN pin of Wifi/Bluetooth
module.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@...s.st.com>
Signed-off-by: Valentin Caron <valentin.caron@...s.st.com>
---
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 6 ++++++
arch/arm/boot/dts/stm32mp157c-dk2.dts | 7 +++++++
2 files changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 6052243ad81c..c65d1ea8b614 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -1244,6 +1244,12 @@ pins {
};
};
+ rtc_out2_rmp_pins_a: rtc-out2-rmp-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 8, ANALOG)>; /* RTC_OUT2_RMP */
+ };
+ };
+
sai2a_pins_a: sai2a-0 {
pins {
pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
index 2bc92ef3aeb9..a1eda91bc2e3 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -11,6 +11,7 @@
#include "stm32mp15-pinctrl.dtsi"
#include "stm32mp15xxac-pinctrl.dtsi"
#include "stm32mp15xx-dkx.dtsi"
+#include <dt-bindings/rtc/rtc-stm32.h>
/ {
model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
@@ -92,6 +93,12 @@ ltdc_ep1_out: endpoint@1 {
};
};
+&rtc {
+ st,lsco = <RTC_OUT2_RMP>;
+ pinctrl-0 = <&rtc_out2_rmp_pins_a>;
+ pinctrl-names = "default";
+};
+
&usart2 {
pinctrl-names = "default", "sleep", "idle";
pinctrl-0 = <&usart2_pins_c>;
--
2.25.1
Powered by blists - more mailing lists