Date:   Wed, 4 May 2022 17:10:07 +0200
From:   Henning Schild <henning.schild@...mens.com>
To:     Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Cc:     Wolfram Sang <wsa@...nel.org>, Jean Delvare <jdelvare@...e.de>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Lee Jones <lee.jones@...aro.org>,
        Hans de Goede <hdegoede@...hat.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Tan Jui Nee <jui.nee.tan@...el.com>,
        Kate Hsuan <hpa@...hat.com>,
        Jonathan Yong <jonathan.yong@...el.com>,
        linux-kernel@...r.kernel.org, linux-edac@...r.kernel.org,
        linux-i2c@...r.kernel.org, linux-gpio@...r.kernel.org,
        platform-driver-x86@...r.kernel.org,
        Borislav Petkov <bp@...en8.de>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Tony Luck <tony.luck@...el.com>,
        James Morse <james.morse@....com>,
        Robert Richter <rric@...nel.org>,
        Jean Delvare <jdelvare@...e.com>,
        Peter Tyser <ptyser@...-inc.com>,
        Mika Westerberg <mika.westerberg@...ux.intel.com>,
        Andy Shevchenko <andy@...nel.org>,
        Mark Gross <markgross@...nel.org>
Subject: Re: [PATCH v4 0/8] platform/x86: introduce p2sb_bar() helper

Am Wed, 4 May 2022 15:42:29 +0300
schrieb Andy Shevchenko <andriy.shevchenko@...ux.intel.com>:

> On Tue, Mar 08, 2022 at 08:50:16PM +0100, Henning Schild wrote:
> > Am Mon, 31 Jan 2022 17:13:38 +0200
> > schrieb Andy Shevchenko <andriy.shevchenko@...ux.intel.com>:
> >   
> > > There are a few users and at least one more is coming (*) that
> > > would like to utilize P2SB mechanism of hiding and unhiding a
> > > device from the PCI configuration space.
> > > 
> > > Here is the series to consolidate p2sb handling code for existing
> > > users and provide a generic way for new comer(s).
> > > 
> > > It also includes a patch to enable GPIO controllers on Apollo Lake
> > > when it's used with ABL bootloader w/o ACPI support.
> > > 
> > > The patch that bring the helper ("platform/x86/intel: Add Primary
> > > to Sideband (P2SB) bridge support") has a commit message that
> > > sheds a light on what the P2SB is and why this is needed.
> > > 
> > > The changes made in v2 do not change the main idea and the
> > > functionality in a big scale. What we need is probably one more
> > > (RE-)test done by Henning. I hope to have it merged to v5.18-rc1
> > > that Siemens can develop their changes based on this series.  
> > 
> > I did test this series and it works as expected. Only problem is
> > that the leds driver will not work together with the pinctrl.
> > Because two "in tree drivers" will try to reserve the same memory
> > region when both are enabled. Who wins is a matter of probing order
> > ...  
> 
> Can we have your formal Tested-by tag?

Sure. I will just put it here for you to take.

Tested-by: Henning Schild <henning.schild@...mens.com>

Let me know if you need it in another shape or form.

Henning

> 
> > If you can take my changes into your series we will not have a
> > problem.  
> 
> Yes, that's the plan, but your patches needs a bit of work I believe.
> 
> > Otherwise we might need to create sort of a conflict which my series
> > would revert when switching apl lake to gpio.
> > 
> > I would not know the process, let us see what the reviews bring and
> > how to continue here.  
> 
> I'm about to comment on the patches.
> 
> > Thanks so much for taking care, especially the pinctrl coming up
> > without ACPI really improves the simatic leds on the apl lake.  
> 
> You are welcome!
> 
> > In fact i will have to double check if i really need the p2sb for
> > the 427E wdt ... but until i have an answer, p2sb works just fine.  
> 
> Thanks!
> 
> > > I have tested this on Apollo Lake platform (I'm able to see SPI
> > > NOR and since we have an ACPI device for GPIO I do not see any
> > > attempts to recreate one).
> > > 
> > > *) One in this series, and one is a due after merge in the Simatic
> > > IPC drivers
> > > 
> > > The series may be routed either via MFD (and I guess Lee would
> > > prefer that) or via PDx86, whichever seems better for you, folks.
> > > As of today patches are ACKed by the respective maintainers, but
> > > I2C one and one of the MFD.
> > > 
> > > Wolfram, can you ACK the patch against i2c-i801 driver, if you
> > > have no objections?
> > > 
> > > Changes in v4:
> > > - added tag to the entire series (Hans)
> > > - added tag to pin control patch (Mika)
> > > - dropped PCI core changes (PCI core doesn't want modifications
> > > to be made)
> > > - as a consequence of the above merged necessary bits into p2sb.c
> > > - added a check that p2sb is really hidden (Hans)
> > > - added EDAC patches (reviewed by maintainer internally)
> > > 
> > > Changes in v3:
> > > - resent with cover letter
> > > 
> > > Changes in v2:
> > > - added parentheses around bus in macros (Joe)
> > > - added tag (Jean)
> > > - fixed indentation and wrapping in the header (Christoph)
> > > - moved out of PCI realm to PDx86 as the best common denominator
> > > (Bjorn)
> > > - added a verbose commit message to explain P2SB thingy (Bjorn)
> > > - converted first parameter from pci_dev to pci_bus
> > > - made first two parameters (bus and devfn) optional (Henning,
> > > Lee)
> > > - added Intel pin control patch to the series (Henning, Mika)
> > > - fixed English style in the commit message of one of MFD patch
> > > (Lee)
> > > - added tags to my MFD LPC ICH patches (Lee)
> > > - used consistently (c) (Lee)
> > > - made indexing for MFD cell and resource arrays (Lee)
> > > - fixed the resource size in i801 (Jean)
> > > 
> > > Andy Shevchenko (6):
> > >   pinctrl: intel: Check against matching data instead of ACPI
> > > companion mfd: lpc_ich: Factor out lpc_ich_enable_spi_write()
> > >   mfd: lpc_ich: Switch to generic p2sb_bar()
> > >   i2c: i801: convert to use common P2SB accessor
> > >   EDAC, pnd2: Use proper I/O accessors and address space
> > > annotation EDAC, pnd2: convert to use common P2SB accessor
> > > 
> > > Jonathan Yong (1):
> > >   platform/x86/intel: Add Primary to Sideband (P2SB) bridge
> > > support
> > > 
> > > Tan Jui Nee (1):
> > >   mfd: lpc_ich: Add support for pinctrl in non-ACPI system
> > > 
> > >  drivers/edac/Kconfig                   |   1 +
> > >  drivers/edac/pnd2_edac.c               |  62 ++---
> > >  drivers/i2c/busses/Kconfig             |   1 +
> > >  drivers/i2c/busses/i2c-i801.c          |  39 +---
> > >  drivers/mfd/Kconfig                    |   1 +
> > >  drivers/mfd/lpc_ich.c                  | 136 +++++++++--
> > >  drivers/pinctrl/intel/pinctrl-intel.c  |  14 +-
> > >  drivers/platform/x86/intel/Kconfig     |  12 +
> > >  drivers/platform/x86/intel/Makefile    |   1 +
> > >  drivers/platform/x86/intel/p2sb.c      | 305
> > > +++++++++++++++++++++++++ include/linux/platform_data/x86/p2sb.h |
> > > 27 +++ 11 files changed, 500 insertions(+), 99 deletions(-)
> > >  create mode 100644 drivers/platform/x86/intel/p2sb.c
> > >  create mode 100644 include/linux/platform_data/x86/p2sb.h
> > >   
> >   
> 

Powered by blists - more mailing lists