[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date: Thu, 5 May 2022 14:42:31 +0530
From: Aradhya Bhatia <a-bhatia1@...com>
To: Rahul T R <r-ravikumar@...com>, <nm@...com>
CC: <vigneshr@...com>, <kristo@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<tomi.valkeinen@...asonboard.com>,
<laurent.pinchart@...asonboard.com>, <kishon@...com>
Subject: Re: [PATCH v5 0/2] DSS: Add support for DisplayPort
On 29/04/22 16:56, Rahul T R wrote:
> The following series of patches enables DisplayPort on
> j721e-evm
>
> v2:
> - use phandle with a parameter to refer clocks insted of
> sub nodes in serdes_wiz node
> - move phy link node to board DTS file
>
> v3:
> - Fix the regulator node name as per the DT spec
> - Use Macro for GPIO type
>
> v4:
> - Move adding of phy link nodes from 2/2 to 1/2, to fix dtbs checks warnings
> - Add leading zeros to align reg property addresses and sizes
> - Add empty ports for mhdp node in dtsi file to fix dtbs checks warnings
>
> v5:
> - Fix a typo in regulator name
>
> boot logs:
> https://gist.githubusercontent.com/ravi-rahul/1bdbc3f77ab381e486c8394650c2e85d/raw/2327c9894c3236950a00f4511ae668ac4399b71e/j7_DP_upstream.log
>
> kernel patch verify report:
> https://gist.githubusercontent.com/ravi-rahul/a982fef3fae03ec0dbdd5cb475a4cb25/raw/9ef482f96fa351cff7980e4340e9bcb8471ec3ab/report-kernel-patch-verify.txt
>
> Tomi Valkeinen (2):
> arm64: dts: ti: k3-j721e-*: add DP & DP PHY
> arm64: dts: ti: k3-j721e-common-proc-board: add DP to j7 evm
>
> .../dts/ti/k3-j721e-common-proc-board.dts | 77 ++++++++++++++++++-
> arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 75 +++++++++++++++++-
> arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 16 ++++
> 3 files changed, 162 insertions(+), 6 deletions(-)
>
Reviewed-by: Aradhya Bhatia <a-bhatia1@...com>
Powered by blists - more mailing lists