Message-ID: <YnVTz4szkpwkKlFP@hyeyoo>
Date:   Sat, 7 May 2022 01:58:55 +0900
From:   Hyeonggon Yoo <42.hyeyoo@...il.com>
To:     Mike Rapoport <rppt@...nel.org>
Cc:     linux-mm@...ck.org, Andrew Morton <akpm@...ux-foundation.org>,
        Andy Lutomirski <luto@...nel.org>,
        Dave Hansen <dave.hansen@...ux.intel.com>,
        Ira Weiny <ira.weiny@...el.com>,
        Kees Cook <keescook@...omium.org>,
        Mike Rapoport <rppt@...ux.ibm.com>,
        Peter Zijlstra <peterz@...radead.org>,
        Rick Edgecombe <rick.p.edgecombe@...el.com>,
        Vlastimil Babka <vbabka@...e.cz>, linux-kernel@...r.kernel.org,
        x86@...nel.org
Subject: Re: [RFC PATCH 0/3] Prototype for direct map awareness in page
 allocator

On Mon, May 02, 2022 at 09:44:48PM -0700, Mike Rapoport wrote:
> On Sat, Apr 30, 2022 at 01:44:16PM +0000, Hyeonggon Yoo wrote:
> > On Tue, Apr 26, 2022 at 06:21:57PM +0300, Mike Rapoport wrote:
> > > Hello Hyeonggon,
> > > 
> > > On Tue, Apr 26, 2022 at 05:54:49PM +0900, Hyeonggon Yoo wrote:
> > > > On Thu, Jan 27, 2022 at 10:56:05AM +0200, Mike Rapoport wrote:
> > > > > From: Mike Rapoport <rppt@...ux.ibm.com>
> > > > > 
> > > > > Hi,
> > > > > 
> > > > > This is a second attempt to make page allocator aware of the direct map
> > > > > layout and allow grouping of the pages that must be mapped at PTE level in
> > > > > the direct map.
> > > > >
> > > > 
> > > > Hello mike, It may be a silly question...
> > > > 
> > > > Looking at implementation of set_memory*(), they only split
> > > > PMD/PUD-sized entries. But why not _merge_ them when all entries
> > > > have same permissions after changing permission of an entry?
> > > > 
> > > > I think grouping __GFP_UNMAPPED allocations would help reducing
> > > > direct map fragmentation, but IMHO merging split entries seems better
> > > > to be done in those helpers than in page allocator.
> > >
> > > Maybe, I didn't got as far as to try merging split entries in the direct
> > > map.  IIRC, Kirill sent a patch for collapsing huge pages in the direct map
> > > some time ago, but there still was something that had to initiate the
> > > collapse.
> > 
> > But in this case buddy allocator's view of direct map is quite limited.
> > It cannot merge 2M entries to 1G entry as it does not support
> > big allocations. Also it cannot merge entries of pages freed in boot process
> > as they weren't allocated from page allocator.
> > 
> > And it will become harder when pages in MIGRATE_UNMAPPED is borrowed
> > from another migrate type....
> > 
> > So it would be nice if we can efficiently merge mappings in
> > change_page_attr_set(). this approach can handle cases above.
> > 
> > I think in this case grouping allocations and merging mappings
> > should be done separately.
> 
> I've added the provision to merge the mappings in __free_one_page() because
> at that spot we know for sure we can replace multiple PTEs with a single
> PMD.

Actually no external merging mechanism is needed if CPA supports merging
mappings.

Recently I started to implement similar idea I described above.
The approach is slightly different as it does not scan the page table
but updates count of number of mappings that has non-standard protection bits.
(being "non-standard" means pgprot is not equal to PAGE_KERNEL.)

It increases split_count when standard mapping becomes non-standard
and decreases split_count in the opposite case. It merges mappings when
the count become zero.

Updating counts and merging is invoked in __change_page_attr(), which
is called by set_memory_{rw,ro}(),
set_direct_map_{default,invalid}_noflush(), ... etc.

The implementation looks like revert_page() function that existed in
arch/i386/mm/pageattr.c decades ago...

There are some issues like 1) set_memory_4k()-ed memory should not be
merged and 2) we need to be extremely sure that the count is always
valid.

But I think this approach is definitely worth trying.
I'll send a RFC versionin to list after a bit of more work.

And still, I think grouping allocations using migrate type would
work well with adding merging feature in CPA.

Thanks!
Hyeonggon

> I'm not saying there should be no additional mechanism for collapsing
> direct map pages, but I don't know when and how it should be invoked.
>  
> > > > For example:
> > > > 	1) set_memory_ro() splits 1 RW PMD entry into 511 RW PTE
> > > > 	entries and 1 RO PTE entry.
> > > > 
> > > > 	2) before freeing the pages, we call set_memory_rw() and we have
> > > > 	512 RW PTE entries. Then we can merge it to 1 RW PMD entry.
> > > 
> > > For this we need to check permissions of all 512 pages to make sure we can
> > > use a PMD entry to map them.
> > 
> > Of course that may be slow. Maybe one way to optimize this is using some bits
> > in struct page, something like: each bit of page->direct_map_split (unsigned long)
> > is set when at least one entry in (PTRS_PER_PTE = 512)/(BITS_PER_LONG = 64) = 8 entries
> > has special permissions.
> > 
> > Then we just need to set the corresponding bit when splitting mappings and
> > iterate 8 entries when changing permission back again. (and then unset the bit when 8 entries has
> > usual permissions). we can decide to merge by checking if page->direct_map_split is zero.
> > 
> > When scanning, 8 entries would fit into one cacheline.
> > 
> > Any other ideas?
> > 
> > > Not sure that doing the scan in each set_memory call won't cause an overall
> > > slowdown.
> > 
> > I think we can evaluate it by measuring boot time and bpf/module
> > load/unload time.
> > 
> > Is there any other workload that is directly affected
> > by performance of set_memory*()?
> > 
> > > > 	3) after 2) we can do same thing about PMD-sized entries
> > > > 	and merge them into 1 PUD entry if 512 PMD entries have
> > > > 	same permissions.
> > > > [...]
> > > > > Mike Rapoport (3):
> > > > >   mm/page_alloc: introduce __GFP_UNMAPPED and MIGRATE_UNMAPPED
> > > > >   mm/secretmem: use __GFP_UNMAPPED to allocate pages
> > > > >   EXPERIMENTAL: x86/module: use __GFP_UNMAPPED in module_alloc
> > > > -- 
> > > > Thanks,
> > > > Hyeonggon
> > > 
> > > -- 
> > > Sincerely yours,
> > > Mike.
> 
> -- 
> Sincerely yours,
> Mike.

-- 
Thanks,
Hyeonggon

Powered by blists - more mailing lists