linux-kernel - Re: [PATCH V11 4/9] mfd: pm8008: Add reset-gpios

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAE-0n51c8H6XnP+6uDmWt6PtiiEAYWSR4DMsZ2CYn-YPuYkqPw@mail.gmail.com>
Date:   Fri, 6 May 2022 10:39:41 -0400
From:   Stephen Boyd <swboyd@...omium.org>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Satya Priya <quic_c_skakit@...cinc.com>
Cc:     Lee Jones <lee.jones@...aro.org>,
        Liam Girdwood <lgirdwood@...il.com>,
        Mark Brown <broonie@...nel.org>, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        quic_collinsd@...cinc.com, quic_subbaram@...cinc.com,
        quic_jprakash@...cinc.com
Subject: Re: [PATCH V11 4/9] mfd: pm8008: Add reset-gpios

Quoting Satya Priya (2022-05-05 02:25:34)
> diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
> index c472d7f..e7c3b32 100644
> --- a/drivers/mfd/qcom-pm8008.c
> +++ b/drivers/mfd/qcom-pm8008.c
> @@ -4,6 +4,7 @@
>   */
>
>  #include <linux/bitops.h>
> +#include <linux/gpio/consumer.h>
>  #include <linux/i2c.h>
>  #include <linux/interrupt.h>
>  #include <linux/irq.h>
> @@ -221,6 +222,7 @@ static int pm8008_probe(struct i2c_client *client)
>  {
>         int rc;
>         struct pm8008_data *chip;
> +       struct gpio_desc *reset_gpio;
>
>         chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
>         if (!chip)
> @@ -239,6 +241,10 @@ static int pm8008_probe(struct i2c_client *client)
>                         dev_err(chip->dev, "Failed to probe irq periphs: %d\n", rc);
>         }
>
> +       reset_gpio = devm_gpiod_get(chip->dev, "reset", GPIOD_OUT_LOW);

Actually, this needs to come before probing irq chip right? Otherwise
irq chip could try to read/write from the pmic but it would fail.