| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220507194913.261121-10-krzysztof.kozlowski@linaro.org>
Date: Sat, 7 May 2022 21:49:11 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Neil Armstrong <narmstrong@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Luca Weiss <luca@...tu.xyz>, David Heidelberg <david@...t.cz>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 09/11] ARM: dts: qcom: align PMIC GPIO pin configuration with DT schema
DT schema expects PMIC GPIO pin configuration nodes to be named with
'-state' suffix. Optional children should be either 'pinconf' or
followed with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../arm/boot/dts/qcom-apq8060-dragonboard.dts | 20 +++++++++----------
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 4 ++--
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 8 ++++----
.../qcom-apq8064-sony-xperia-lagan-yuga.dts | 2 +-
arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi | 2 +-
.../qcom-msm8974-lge-nexus5-hammerhead.dts | 8 ++++----
.../dts/qcom-msm8974-sony-xperia-rhine.dtsi | 2 +-
.../dts/qcom-msm8974pro-fairphone-fp2.dts | 2 +-
.../boot/dts/qcom-msm8974pro-samsung-klte.dts | 14 ++++++-------
...-msm8974pro-sony-xperia-shinano-castor.dts | 10 +++++-----
arch/arm/boot/dts/qcom-pm8941.dtsi | 2 +-
11 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 138d6478ac84..a104acbfee05 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -273,7 +273,7 @@ MATRIX_KEY(4, 3, KEY_KBDILLUMTOGGLE)
};
gpio@150 {
- dragon_ethernet_gpios: ethernet-gpios {
+ dragon_ethernet_gpios: ethernet-state {
pinconf {
pins = "gpio7";
function = "normal";
@@ -282,7 +282,7 @@ pinconf {
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_bmp085_gpios: bmp085-gpios {
+ dragon_bmp085_gpios: bmp085-state {
pinconf {
pins = "gpio16";
function = "normal";
@@ -291,7 +291,7 @@ pinconf {
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_mpu3050_gpios: mpu3050-gpios {
+ dragon_mpu3050_gpios: mpu3050-state {
pinconf {
pins = "gpio17";
function = "normal";
@@ -300,7 +300,7 @@ pinconf {
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_sdcc3_gpios: sdcc3-gpios {
+ dragon_sdcc3_gpios: sdcc3-state {
pinconf {
pins = "gpio22";
function = "normal";
@@ -309,7 +309,7 @@ pinconf {
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_sdcc5_gpios: sdcc5-gpios {
+ dragon_sdcc5_gpios: sdcc5-state {
pinconf {
pins = "gpio26";
function = "normal";
@@ -319,7 +319,7 @@ pinconf {
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_ak8975_gpios: ak8975-gpios {
+ dragon_ak8975_gpios: ak8975-state {
pinconf {
pins = "gpio33";
function = "normal";
@@ -328,9 +328,9 @@ pinconf {
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_cm3605_gpios: cm3605-gpios {
+ dragon_cm3605_gpios: cm3605-state {
/* Pin 34 connected to the proxy IRQ */
- pinconf_gpio34 {
+ gpio34-pins {
pins = "gpio34";
function = "normal";
input-enable;
@@ -338,7 +338,7 @@ pinconf_gpio34 {
power-source = <PM8058_GPIO_S3>;
};
/* Pin 35 connected to ASET */
- pinconf_gpio35 {
+ gpio35-pins {
pins = "gpio35";
function = "normal";
output-high;
@@ -346,7 +346,7 @@ pinconf_gpio35 {
power-source = <PM8058_GPIO_S3>;
};
};
- dragon_veth_gpios: veth-gpios {
+ dragon_veth_gpios: veth-state {
pinconf {
pins = "gpio40";
function = "normal";
diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index e068a8d0adf0..7e57a0750320 100644
--- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -196,8 +196,8 @@ v3p3_fixed: v3p3 {
qcom,ssbi@...000 {
pmic@0 {
gpio@150 {
- wlan_default_gpios: wlan-gpios {
- pios {
+ wlan_default_gpios: wlan-gpios-state {
+ pinconf {
pins = "gpio43";
function = "normal";
bias-disable;
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 2638b380be20..77e841243646 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -291,8 +291,8 @@ pci@...00000 {
qcom,ssbi@...000 {
pmic@0 {
gpio@150 {
- wlan_default_gpios: wlan-gpios {
- pios {
+ wlan_default_gpios: wlan-gpios-state {
+ pinconf {
pins = "gpio43";
function = "normal";
bias-disable;
@@ -300,8 +300,8 @@ pios {
};
};
- notify_led: nled {
- pios {
+ notify_led: nled-state {
+ pinconf {
pins = "gpio18";
function = "normal";
bias-disable;
diff --git a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
index 0cee62c7b8b0..3cf79cc5b539 100644
--- a/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-sony-xperia-lagan-yuga.dts
@@ -334,7 +334,7 @@ ncp {
qcom,ssbi@...000 {
pmic@0 {
gpio@150 {
- gpio_keys_pin_a: gpio-keys-pin-active {
+ gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio3", "gpio4", "gpio29", "gpio35";
function = "normal";
diff --git a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
index 10ad929759ed..49de1821ac3a 100644
--- a/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
+++ b/arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi
@@ -114,7 +114,7 @@ pins {
};
&pmicgpio {
- usb_vbus_5v_pins: usb_vbus_5v_pins {
+ usb_vbus_5v_pins: usb-vbus-5v-state {
pins = "gpio4";
function = "normal";
output-high;
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
index 9493886a5c0d..4d8fc8689d24 100644
--- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
@@ -272,7 +272,7 @@ phy@a {
};
&pm8941_gpios {
- gpio_keys_pin_a: gpio-keys-active {
+ gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio3";
function = "normal";
@@ -280,7 +280,7 @@ gpio_keys_pin_a: gpio-keys-active {
power-source = <PM8941_GPIO_S3>;
};
- fuelgauge_pin: fuelgauge-int {
+ fuelgauge_pin: fuelgauge-int-state {
pins = "gpio9";
function = "normal";
@@ -289,7 +289,7 @@ fuelgauge_pin: fuelgauge-int {
power-source = <PM8941_GPIO_S3>;
};
- wlan_sleep_clk_pin: wl-sleep-clk {
+ wlan_sleep_clk_pin: wl-sleep-clk-state {
pins = "gpio16";
function = "func2";
@@ -297,7 +297,7 @@ wlan_sleep_clk_pin: wl-sleep-clk {
power-source = <PM8941_GPIO_S3>;
};
- wlan_regulator_pin: wl-reg-active {
+ wlan_regulator_pin: wl-reg-active-state {
pins = "gpio17";
function = "normal";
diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
index 1d21de46f85c..a4fec2d0d158 100644
--- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi
@@ -163,7 +163,7 @@ &pm8941_coincell {
};
&pm8941_gpios {
- gpio_keys_pin_a: gpio-keys-active {
+ gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio3", "gpio4", "gpio5";
function = "normal";
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
index 26fc2002e5c3..7bfea4a96896 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-fairphone-fp2.dts
@@ -95,7 +95,7 @@ phy@a {
};
&pm8941_gpios {
- gpio_keys_pin_a: gpio-keys-active {
+ gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio1", "gpio2", "gpio5";
function = "normal";
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
index d6b2300a8223..90f7a399f40b 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts
@@ -398,7 +398,7 @@ phy@a {
};
&pma8084_gpios {
- gpio_keys_pin_a: gpio-keys-active {
+ gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio3", "gpio5";
function = "normal";
@@ -406,7 +406,7 @@ gpio_keys_pin_a: gpio-keys-active {
power-source = <PMA8084_GPIO_S4>;
};
- touchkey_pin: touchkey-int-pin {
+ touchkey_pin: touchkey-int-state {
pins = "gpio6";
function = "normal";
bias-disable;
@@ -414,7 +414,7 @@ touchkey_pin: touchkey-int-pin {
power-source = <PMA8084_GPIO_S4>;
};
- touch_pin: touchscreen-int-pin {
+ touch_pin: touchscreen-int-state {
pins = "gpio8";
function = "normal";
bias-disable;
@@ -422,7 +422,7 @@ touch_pin: touchscreen-int-pin {
power-source = <PMA8084_GPIO_S4>;
};
- panel_en_pin: panel-en-pin {
+ panel_en_pin: panel-en-state {
pins = "gpio14";
function = "normal";
bias-pull-up;
@@ -430,7 +430,7 @@ panel_en_pin: panel-en-pin {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
- wlan_sleep_clk_pin: wlan-sleep-clk-pin {
+ wlan_sleep_clk_pin: wlan-sleep-clk-state {
pins = "gpio16";
function = "func2";
@@ -439,7 +439,7 @@ wlan_sleep_clk_pin: wlan-sleep-clk-pin {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
};
- panel_rst_pin: panel-rst-pin {
+ panel_rst_pin: panel-rst-state {
pins = "gpio17";
function = "normal";
bias-disable;
@@ -447,7 +447,7 @@ panel_rst_pin: panel-rst-pin {
qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
};
- fuelgauge_pin: fuelgauge-int-pin {
+ fuelgauge_pin: fuelgauge-int-state {
pins = "gpio21";
function = "normal";
bias-disable;
diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
index 9bd8faea61a5..e9bcd3b4ebb3 100644
--- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -244,7 +244,7 @@ &pm8941_coincell {
};
&pm8941_gpios {
- gpio_keys_pin_a: gpio-keys-active {
+ gpio_keys_pin_a: gpio-keys-active-state {
pins = "gpio2", "gpio5";
function = "normal";
@@ -252,7 +252,7 @@ gpio_keys_pin_a: gpio-keys-active {
power-source = <PM8941_GPIO_S3>;
};
- bt_reg_on_pin: bt-reg-on {
+ bt_reg_on_pin: bt-reg-on-state {
pins = "gpio16";
function = "normal";
@@ -260,7 +260,7 @@ bt_reg_on_pin: bt-reg-on {
power-source = <PM8941_GPIO_S3>;
};
- wlan_sleep_clk_pin: wl-sleep-clk {
+ wlan_sleep_clk_pin: wl-sleep-clk-state {
pins = "gpio17";
function = "func2";
@@ -268,7 +268,7 @@ wlan_sleep_clk_pin: wl-sleep-clk {
power-source = <PM8941_GPIO_S3>;
};
- wlan_regulator_pin: wl-reg-active {
+ wlan_regulator_pin: wl-reg-active-state {
pins = "gpio18";
function = "normal";
@@ -276,7 +276,7 @@ wlan_regulator_pin: wl-reg-active {
power-source = <PM8941_GPIO_S3>;
};
- lcd_dcdc_en_pin_a: lcd-dcdc-en-active {
+ lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
pins = "gpio20";
function = "normal";
diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi
index cdd2bdb77b32..a68634397938 100644
--- a/arch/arm/boot/dts/qcom-pm8941.dtsi
+++ b/arch/arm/boot/dts/qcom-pm8941.dtsi
@@ -68,7 +68,7 @@ pm8941_gpios: gpios@...0 {
interrupt-controller;
#interrupt-cells = <2>;
- boost_bypass_n_pin: boost-bypass {
+ boost_bypass_n_pin: boost-bypass-state {
pins = "gpio21";
function = "normal";
};
--
2.32.0
Powered by blists - more mailing lists