[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220509175616.1089346-11-clg@kaod.org>
Date: Mon, 9 May 2022 19:56:15 +0200
From: Cédric Le Goater <clg@...d.org>
To: linux-spi@...r.kernel.org, linux-mtd@...ts.infradead.org
Cc: Mark Brown <broonie@...nel.org>,
Tudor Ambarus <tudor.ambarus@...rochip.com>,
Pratyush Yadav <p.yadav@...com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
linux-aspeed@...ts.ozlabs.org, Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>,
Chin-Ting Kuo <chin-ting_kuo@...eedtech.com>,
devicetree@...r.kernel.org, Rob Herring <robh+dt@...nel.org>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Tao Ren <rentao.bupt@...il.com>,
Cédric Le Goater <clg@...d.org>,
Jae Hyun Yoo <quic_jaehyoo@...cinc.com>
Subject: [PATCH v7 10/11] ARM: dts: aspeed-g4: Set spi-max-frequency for all flashes
From: Tao Ren <rentao.bupt@...il.com>
Set "spi-max-frequency" to 50 MHz for all the flashes under the FMC
controller to ensure the clock frequency is calculated correctly.
Suggested-by: Cédric Le Goater <clg@...d.org>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@...cinc.com>
Signed-off-by: Tao Ren <rentao.bupt@...il.com>
Signed-off-by: Cédric Le Goater <clg@...d.org>
---
arch/arm/boot/dts/aspeed-g4.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 1c6354cec9f2..530491ae5eb2 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -72,24 +72,28 @@ flash@1 {
reg = < 1 >;
compatible = "jedec,spi-nor";
spi-rx-bus-width = <2>;
+ spi-max-frequency = <50000000>;
status = "disabled";
};
flash@2 {
reg = < 2 >;
compatible = "jedec,spi-nor";
spi-rx-bus-width = <2>;
+ spi-max-frequency = <50000000>;
status = "disabled";
};
flash@3 {
reg = < 3 >;
compatible = "jedec,spi-nor";
spi-rx-bus-width = <2>;
+ spi-max-frequency = <50000000>;
status = "disabled";
};
flash@4 {
reg = < 4 >;
compatible = "jedec,spi-nor";
spi-rx-bus-width = <2>;
+ spi-max-frequency = <50000000>;
status = "disabled";
};
};
--
2.35.1
Powered by blists - more mailing lists