[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87k0avrsm5.fsf@BL-laptop>
Date: Mon, 09 May 2022 10:57:06 +0200
From: Gregory CLEMENT <gregory.clement@...tlin.com>
To: Robert Marko <robert.marko@...tura.hr>, andrew@...n.ch,
sebastian.hesselbarth@...il.com, robh+dt@...nel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, pali@...nel.org
Cc: Robert Marko <robert.marko@...tura.hr>
Subject: Re: [PATCH v3 1/3] arm64: dts: marvell: espressobin-ultra: fix
SPI-NOR config
Robert Marko <robert.marko@...tura.hr> writes:
> SPI config for the SPI-NOR is incorrect and completely breaking
> reading/writing to the onboard SPI-NOR.
>
> SPI-NOR is connected in the single(x1) IO mode and not in the quad
> (x4) mode.
> Also, there is no need to override the max frequency from the DTSI
> as the mx25u3235f that is used supports 104Mhz.
>
> Fixes: 3404fe15a60f ("arm64: dts: marvell: add DT for ESPRESSObin-Ultra")
> Signed-off-by: Robert Marko <robert.marko@...tura.hr>
Applied on mvebu/dt64
Thanks,
Gregory
> ---
> Changes in v3:
> * Add Fixes tag
> ---
> arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts | 4 ----
> 1 file changed, 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
> index c5eb3604dd5b..610ff6f385c7 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dts
> @@ -71,10 +71,6 @@ &sdhci1 {
>
> &spi0 {
> flash@0 {
> - spi-max-frequency = <108000000>;
> - spi-rx-bus-width = <4>;
> - spi-tx-bus-width = <4>;
> -
> partitions {
> compatible = "fixed-partitions";
> #address-cells = <1>;
> --
> 2.31.1
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
Powered by blists - more mailing lists