linux-kernel - [PATCH 2/3] clocksource/drivers/timer-microchip-pit64b: use mchp_pit64b

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20220509090637.4058399-3-claudiu.beznea@microchip.com>
Date:   Mon, 9 May 2022 12:06:36 +0300
From:   Claudiu Beznea <claudiu.beznea@...rochip.com>
To:     <daniel.lezcano@...aro.org>, <tglx@...utronix.de>
CC:     <linux-kernel@...r.kernel.org>,
        Claudiu Beznea <claudiu.beznea@...rochip.com>
Subject: [PATCH 2/3] clocksource/drivers/timer-microchip-pit64b: use mchp_pit64b_{suspend, resume}

Use mchp_pit64b_suspend() and mchp_pit64b_resume() to disable or
enable timers clocks on init and remove specific
clk_prepare_{disable, enable} calls. This is ok also for clockevent timer
as proper clock enable, disable is done on .set_state_oneshot,
.set_state_periodic, .set_state_shutdown calls.

Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
---
 drivers/clocksource/timer-microchip-pit64b.c | 24 ++++----------------
 1 file changed, 5 insertions(+), 19 deletions(-)

diff --git a/drivers/clocksource/timer-microchip-pit64b.c b/drivers/clocksource/timer-microchip-pit64b.c
index b51259395ac3..f50705698283 100644
--- a/drivers/clocksource/timer-microchip-pit64b.c
+++ b/drivers/clocksource/timer-microchip-pit64b.c
@@ -344,6 +344,7 @@ static int __init mchp_pit64b_init_clksrc(struct mchp_pit64b_timer *timer,
 	if (!cs)
 		return -ENOMEM;
 
+	mchp_pit64b_resume(timer);
 	mchp_pit64b_reset(timer, ULLONG_MAX, MCHP_PIT64B_MR_CONT, 0);
 
 	mchp_pit64b_cs_base = timer->base;
@@ -365,8 +366,7 @@ static int __init mchp_pit64b_init_clksrc(struct mchp_pit64b_timer *timer,
 		pr_debug("clksrc: Failed to register PIT64B clocksource!\n");
 
 		/* Stop timer. */
-		writel_relaxed(MCHP_PIT64B_CR_SWRST,
-			       timer->base + MCHP_PIT64B_CR);
+		mchp_pit64b_suspend(timer);
 		kfree(cs);
 
 		return ret;
@@ -450,19 +450,10 @@ static int __init mchp_pit64b_dt_init_timer(struct device_node *node,
 	if (ret)
 		goto irq_unmap;
 
-	ret = clk_prepare_enable(timer.pclk);
-	if (ret)
-		goto irq_unmap;
-
-	if (timer.mode & MCHP_PIT64B_MR_SGCLK) {
-		ret = clk_prepare_enable(timer.gclk);
-		if (ret)
-			goto pclk_unprepare;
-
+	if (timer.mode & MCHP_PIT64B_MR_SGCLK)
 		clk_rate = clk_get_rate(timer.gclk);
-	} else {
+	else
 		clk_rate = clk_get_rate(timer.pclk);
-	}
 	clk_rate = clk_rate / (MCHP_PIT64B_MODE_TO_PRES(timer.mode) + 1);
 
 	if (clkevt)
@@ -471,15 +462,10 @@ static int __init mchp_pit64b_dt_init_timer(struct device_node *node,
 		ret = mchp_pit64b_init_clksrc(&timer, clk_rate);
 
 	if (ret)
-		goto gclk_unprepare;
+		goto irq_unmap;
 
 	return 0;
 
-gclk_unprepare:
-	if (timer.mode & MCHP_PIT64B_MR_SGCLK)
-		clk_disable_unprepare(timer.gclk);
-pclk_unprepare:
-	clk_disable_unprepare(timer.pclk);
 irq_unmap:
 	irq_dispose_mapping(irq);
 io_unmap:
-- 
2.34.1