[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220509032005.GJ4640@hu-pkondeti-hyd.qualcomm.com>
Date: Mon, 9 May 2022 08:50:05 +0530
From: Pavan Kondeti <quic_pkondeti@...cinc.com>
To: Krishna Kurapati <quic_kriskura@...cinc.com>
CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Stephen Boyd <swboyd@...omium.org>,
"Doug Anderson" <dianders@...omium.org>,
Matthias Kaehlcke <mka@...omium.org>,
Wesley Cheng <wcheng@...eaurora.org>,
<devicetree@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
<linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-phy@...ts.infradead.org>, <quic_pkondeti@...cinc.com>,
<quic_ppratap@...cinc.com>, <quic_vpulyala@...cinc.com>,
Sandeep Maheswaram <quic_c_sanm@...cinc.com>
Subject: Re: [v3 3/3] arm64: dts: qcom: sc7280: Update SNPS Phy params for
SC7280 IDP device
Hi Krishna,
On Sun, May 08, 2022 at 05:42:27PM +0530, Krishna Kurapati wrote:
> Overriding the SNPS Phy tuning parameters for SC7280 IDP device.
>
> Signed-off-by: Sandeep Maheswaram <quic_c_sanm@...cinc.com>
> Signed-off-by: Krishna Kurapati <quic_kriskura@...cinc.com>
> ---
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 5eb6689..ad85ffb 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -325,6 +325,12 @@
> vdda-pll-supply = <&vreg_l10c_0p8>;
> vdda33-supply = <&vreg_l2b_3p0>;
> vdda18-supply = <&vreg_l1c_1p8>;
> + qcom,hs-rise-fall-time-bps = <0>;
> + qcom,squelch-detector-bps = <(-2090)>;
> + qcom,hs-disconnect-bps = <1743>;
> + qcom,hs-amplitude-bps = <1780>;
> + qcom,hs-crossover-voltage = <(-31)>;
> + qcom,hs-output-impedance = <2600>;
> };
Is this an example change or do we see any HS electrical compliance failures
on SC7280 IDP that will get fixed with these override sequence?
Thanks,
Pavan
Powered by blists - more mailing lists