Message-ID: <72396dec-d418-e732-11a8-a92e89692dd1@gmail.com>
Date:   Mon, 9 May 2022 20:51:45 +0900
From:   Chanwoo Choi <cwchoi00@...il.com>
To:     Johnson Wang <johnson.wang@...iatek.com>, cw00.choi@...sung.com,
        krzk+dt@...nel.org, robh+dt@...nel.org, kyungmin.park@...sung.com
Cc:     khilman@...nel.org, linux-pm@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, jia-wei.chang@...iatek.com,
        Project_Global_Chrome_Upstream_Group@...iatek.com
Subject: Re: [PATCH v3 2/2] PM / devfreq: mediatek: Introduce MediaTek CCI
 devfreq driver

On 22. 5. 9. 14:57, Johnson Wang wrote:
> On Sat, 2022-05-07 at 22:53 +0900, Chanwoo Choi wrote:
>> On 22. 5. 6. 20:38, Johnson Wang wrote:
>>> On Mon, 2022-04-25 at 20:55 +0800, Johnson Wang wrote:
>>>> We introduce a devfreq driver for the MediaTek Cache Coherent
>>>> Interconnect
>>>> (CCI) used by some MediaTek SoCs.
>>>>
>>>> In this driver, we use the passive devfreq driver to get target
>>>> frequencies
>>>> and adjust voltages accordingly. In MT8183 and MT8186, the
>>>> MediaTek
>>>> CCI
>>>> is supplied by the same regulators with the little core CPUs.
>>>>
>>>> Signed-off-by: Johnson Wang <johnson.wang@...iatek.com>
>>>> Signed-off-by: Jia-Wei Chang <jia-wei.chang@...iatek.com>
>>>> ---
>>>> This patch depends on "devfreq-testing"[1].
>>>> [1]
>>>>
> https://urldefense.com/v3/__https://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux.git/log/?h=devfreq-testing__;!!CTRNKA9wMg0ARbw!wnTkI_sh3TsliBPFP70DFwtSZGtKyPinFu9h2BwULWX-xrWF0C21rLV-n1HhstfmLw42$
>>>>   
>>>> ---
>>>>    drivers/devfreq/Kconfig           |  10 +
>>>>    drivers/devfreq/Makefile          |   1 +
>>>>    drivers/devfreq/mtk-cci-devfreq.c | 474
>>>> ++++++++++++++++++++++++++++++
>>>>    3 files changed, 485 insertions(+)
>>>>    create mode 100644 drivers/devfreq/mtk-cci-devfreq.c
>>>>
>>>> diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
>>>> index 87eb2b837e68..9754d8b31621 100644
>>>> --- a/drivers/devfreq/Kconfig
>>>> +++ b/drivers/devfreq/Kconfig
>>>> @@ -120,6 +120,16 @@ config ARM_TEGRA_DEVFREQ
>>>>    	  It reads ACTMON counters of memory controllers and
>>>> adjusts
>>>> the
>>>>    	  operating frequencies and voltages with OPP support.
>>>>    
>>>> +config ARM_MEDIATEK_CCI_DEVFREQ
>>>> +	tristate "MEDIATEK CCI DEVFREQ Driver"
>>>> +	depends on ARM_MEDIATEK_CPUFREQ || COMPILE_TEST
>>>> +	select DEVFREQ_GOV_PASSIVE
>>>> +	help
>>>> +	  This adds a devfreq driver for MediaTek Cache Coherent
>>>> Interconnect
>>>> +	  which is shared the same regulators with the cpu cluster. It
>>>> can track
>>>> +	  buck voltages and update a proper CCI frequency. Use the
>>>> notification
>>>> +	  to get the regulator status.
>>>> +
>>>>    config ARM_RK3399_DMC_DEVFREQ
>>>>    	tristate "ARM RK3399 DMC DEVFREQ Driver"
>>>>    	depends on (ARCH_ROCKCHIP && HAVE_ARM_SMCCC) || \
>>>> diff --git a/drivers/devfreq/Makefile b/drivers/devfreq/Makefile
>>>> index 0b6be92a25d9..bf40d04928d0 100644
>>>> --- a/drivers/devfreq/Makefile
>>>> +++ b/drivers/devfreq/Makefile
>>>> @@ -11,6 +11,7 @@ obj-$(CONFIG_DEVFREQ_GOV_PASSIVE)	+=
>>>> governor_passive.o
>>>>    obj-$(CONFIG_ARM_EXYNOS_BUS_DEVFREQ)	+= exynos-bus.o
>>>>    obj-$(CONFIG_ARM_IMX_BUS_DEVFREQ)	+= imx-bus.o
>>>>    obj-$(CONFIG_ARM_IMX8M_DDRC_DEVFREQ)	+= imx8m-ddrc.o
>>>> +obj-$(CONFIG_ARM_MEDIATEK_CCI_DEVFREQ)	+= mtk-cci-devfreq.o
>>>>    obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ)	+= rk3399_dmc.o
>>>>    obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ)	+= sun8i-a33-
>>>> mbus.o
>>>>    obj-$(CONFIG_ARM_TEGRA_DEVFREQ)		+= tegra30-devfreq.o
>>>> diff --git a/drivers/devfreq/mtk-cci-devfreq.c
>>>> b/drivers/devfreq/mtk-
>>>> cci-devfreq.c
>>>> new file mode 100644
>>>> index 000000000000..b3e31c45a57c
>>>> --- /dev/null
>>>> +++ b/drivers/devfreq/mtk-cci-devfreq.c
>>>> @@ -0,0 +1,474 @@
>>>> +// SPDX-License-Identifier: GPL-2.0-only
>>>> +/*
>>>> + * Copyright (C) 2022 MediaTek Inc.
>>>> + */
>>>> +
>>>> +#include <linux/clk.h>
>>>> +#include <linux/devfreq.h>
>>>> +#include <linux/minmax.h>
>>>> +#include <linux/module.h>
>>>> +#include <linux/of.h>
>>>> +#include <linux/of_device.h>
>>>> +#include <linux/platform_device.h>
>>>> +#include <linux/pm_opp.h>
>>>> +#include <linux/regulator/consumer.h>
>>>> +
>>>> +struct mtk_ccifreq_platform_data {
>>>> +	int min_volt_shift;
>>>> +	int max_volt_shift;
>>>> +	int proc_max_volt;
>>>> +	int sram_min_volt;
>>>> +	int sram_max_volt;
>>>> +};
>>>> +
>>>> +struct mtk_ccifreq_drv {
>>>> +	struct device *dev;
>>>> +	struct devfreq *devfreq;
>>>> +	struct regulator *proc_reg;
>>>> +	struct regulator *sram_reg;
>>>> +	struct clk *cci_clk;
>>>> +	struct clk *inter_clk;
>>>> +	int inter_voltage;
>>>> +	int pre_voltage;
>>>> +	unsigned long pre_freq;
>>>> +	/* Avoid race condition for regulators between notify and
>>>> policy */
>>>> +	struct mutex reg_lock;
>>>> +	struct notifier_block opp_nb;
>>>> +	const struct mtk_ccifreq_platform_data *soc_data;
>>>> +	int vtrack_max;
>>>> +};
>>>> +
>>>> +static int mtk_ccifreq_set_voltage(struct mtk_ccifreq_drv *drv,
>>>> int
>>>> new_voltage)
>>>> +{
>>>> +	const struct mtk_ccifreq_platform_data *soc_data = drv-
>>>>> soc_data;
>>>>
>>>> +	struct device *dev = drv->dev;
>>>> +	int pre_voltage, pre_vsram, new_vsram, vsram, voltage, ret;
>>>> +	int retry_max = drv->vtrack_max;
>>>> +
>>>> +	if (!drv->sram_reg) {
>>>> +		ret = regulator_set_voltage(drv->proc_reg, new_voltage,
>>>> +					    drv->soc_data-
>>>>> proc_max_volt);
>>>>
>>>> +		goto out_set_voltage;
>>>> +	}
>>>> +
>>>> +	pre_voltage = regulator_get_voltage(drv->proc_reg);
>>>> +	if (pre_voltage < 0) {
>>>> +		dev_err(dev, "invalid vproc value: %d\n", pre_voltage);
>>>> +		return pre_voltage;
>>>> +	}
>>>> +
>>>> +	pre_vsram = regulator_get_voltage(drv->sram_reg);
>>>> +	if (pre_vsram < 0) {
>>>> +		dev_err(dev, "invalid vsram value: %d\n", pre_vsram);
>>>> +		return pre_vsram;
>>>> +	}
>>>> +
>>>> +	new_vsram = clamp(new_voltage + soc_data->min_volt_shift,
>>>> +			  soc_data->sram_min_volt, soc_data-
>>>>> sram_max_volt);
>>>>
>>>> +
>>>> +	do {
>>>> +		if (pre_voltage <= new_voltage) {
>>>> +			vsram = clamp(pre_voltage + soc_data-
>>>>> max_volt_shift,
>>>>
>>>> +				      soc_data->sram_min_volt,
>>>> new_vsram);
>>>> +			ret = regulator_set_voltage(drv->sram_reg,
>>>> vsram,
>>>> +						    soc_data-
>>>>> sram_max_volt);
>>>>
>>>> +			if (ret)
>>>> +				return ret;
>>>> +
>>>> +			if (vsram == soc_data->sram_max_volt ||
>>>> +			    new_vsram == soc_data->sram_min_volt)
>>>> +				voltage = new_voltage;
>>>> +			else
>>>> +				voltage = vsram - soc_data-
>>>>> min_volt_shift;
>>>>
>>>> +
>>>> +			ret = regulator_set_voltage(drv->proc_reg,
>>>> voltage,
>>>> +						    soc_data-
>>>>> proc_max_volt);
>>>>
>>>> +			if (ret) {
>>>> +				regulator_set_voltage(drv->sram_reg,
>>>> pre_vsram,
>>>> +						      soc_data-
>>>>> sram_max_volt);
>>>>
>>>> +				return ret;
>>>> +			}
>>>> +		} else if (pre_voltage > new_voltage) {
>>>> +			voltage = max(new_voltage,
>>>> +				      pre_vsram - soc_data-
>>>>> max_volt_shift);
>>>>
>>>> +			ret = regulator_set_voltage(drv->proc_reg,
>>>> voltage,
>>>> +						    soc_data-
>>>>> proc_max_volt);
>>>>
>>>> +			if (ret)
>>>> +				return ret;
>>>> +
>>>> +			if (voltage == new_voltage)
>>>> +				vsram = new_vsram;
>>>> +			else
>>>> +				vsram = max(new_vsram,
>>>> +					    voltage + soc_data-
>>>>> min_volt_shift);
>>>>
>>>> +
>>>> +			ret = regulator_set_voltage(drv->sram_reg,
>>>> vsram,
>>>> +						    soc_data-
>>>>> sram_max_volt);
>>>>
>>>> +			if (ret) {
>>>> +				regulator_set_voltage(drv->proc_reg,
>>>> pre_voltage,
>>>> +						      soc_data-
>>>>> proc_max_volt);
>>>>
>>>> +				return ret;
>>>> +			}
>>>> +		}
>>>> +
>>>> +		pre_voltage = voltage;
>>>> +		pre_vsram = vsram;
>>>> +
>>>> +		if (--retry_max < 0) {
>>>> +			dev_err(dev,
>>>> +				"over loop count, failed to set
>>>> voltage\n");
>>>> +			return -EINVAL;
>>>> +		}
>>>> +	} while (voltage != new_voltage || vsram != new_vsram);
>>>> +
>>>> +out_set_voltage:
>>>> +	if (!ret)
>>>> +		drv->pre_voltage = new_voltage;
>>>> +
>>>> +	return ret;
>>>> +}
>>>> +
>>>> +static int mtk_ccifreq_target(struct device *dev, unsigned long
>>>> *freq,
>>>> +			      u32 flags)
>>>> +{
>>>> +	struct mtk_ccifreq_drv *drv = dev_get_drvdata(dev);
>>>> +	struct clk *cci_pll = clk_get_parent(drv->cci_clk);
>>>> +	struct dev_pm_opp *opp;
>>>> +	unsigned long opp_rate;
>>>> +	int voltage, pre_voltage, inter_voltage, target_voltage, ret;
>>>> +
>>>> +	if (!drv)
>>>> +		return -EINVAL;
>>>> +
>>>> +	if (drv->pre_freq == *freq)
>>>> +		return 0;
>>>> +
>>>> +	inter_voltage = drv->inter_voltage;
>>>> +
>>>> +	opp_rate = *freq;
>>>> +	opp = devfreq_recommended_opp(dev, &opp_rate, 1);
>>>> +	if (IS_ERR(opp)) {
>>>> +		dev_err(dev, "failed to find opp for freq: %ld\n",
>>>> opp_rate);
>>>> +		return PTR_ERR(opp);
>>>> +	}
>>>> +
>>>> +	mutex_lock(&drv->reg_lock);
>>>> +
>>>> +	voltage = dev_pm_opp_get_voltage(opp);
>>>> +	dev_pm_opp_put(opp);
>>>> +
>>>> +	if (unlikely(drv->pre_voltage <= 0))
>>>> +		pre_voltage = regulator_get_voltage(drv->proc_reg);
>>>> +	else
>>>> +		pre_voltage = drv->pre_voltage;
>>>> +
>>>> +	if (pre_voltage < 0) {
>>>> +		dev_err(dev, "invalid vproc value: %d\n", pre_voltage);
>>>> +		return pre_voltage;
>>>> +	}
>>>> +
>>>> +	/* scale up: set voltage first then freq. */
>>>> +	target_voltage = max(inter_voltage, voltage);
>>>> +	if (pre_voltage <= target_voltage) {
>>>> +		ret = mtk_ccifreq_set_voltage(drv, target_voltage);
>>>> +		if (ret) {
>>>> +			dev_err(dev, "failed to scale up voltage\n");
>>>> +			goto out_restore_voltage;
>>>> +		}
>>>> +	}
>>>> +
>>>> +	/* switch the cci clock to intermediate clock source. */
>>>> +	ret = clk_set_parent(drv->cci_clk, drv->inter_clk);
>>>> +	if (ret) {
>>>> +		dev_err(dev, "failed to re-parent cci clock\n");
>>>> +		goto out_restore_voltage;
>>>> +	}
>>>> +
>>>> +	/* set the original clock to target rate. */
>>>> +	ret = clk_set_rate(cci_pll, *freq);
>>>> +	if (ret) {
>>>> +		dev_err(dev, "failed to set cci pll rate: %d\n", ret);
>>>> +		clk_set_parent(drv->cci_clk, cci_pll);
>>>> +		goto out_restore_voltage;
>>>> +	}
>>>> +
>>>> +	/* switch the cci clock back to the original clock source. */
>>>> +	ret = clk_set_parent(drv->cci_clk, cci_pll);
>>>> +	if (ret) {
>>>> +		dev_err(dev, "failed to re-parent cci clock\n");
>>>> +		mtk_ccifreq_set_voltage(drv, inter_voltage);
>>>> +		goto out_unlock;
>>>> +	}
>>>> +
>>>> +	/*
>>>> +	 * If the new voltage is lower than the intermediate voltage or
>>>> the
>>>> +	 * original voltage, scale down to the new voltage.
>>>> +	 */
>>>> +	if (voltage < inter_voltage || voltage < pre_voltage) {
>>>> +		ret = mtk_ccifreq_set_voltage(drv, voltage);
>>>> +		if (ret) {
>>>> +			dev_err(dev, "failed to scale down voltage\n");
>>>> +			goto out_unlock;
>>>> +		}
>>>> +	}
>>>> +
>>>> +	drv->pre_freq = *freq;
>>>> +	mutex_unlock(&drv->reg_lock);
>>>> +
>>>> +	return 0;
>>>> +
>>>> +out_restore_voltage:
>>>> +	mtk_ccifreq_set_voltage(drv, pre_voltage);
>>>> +
>>>> +out_unlock:
>>>> +	mutex_unlock(&drv->reg_lock);
>>>> +	return ret;
>>>> +}
>>>> +
>>>> +static int mtk_ccifreq_opp_notifier(struct notifier_block *nb,
>>>> +				    unsigned long event, void *data)
>>>> +{
>>>> +	struct dev_pm_opp *opp = data;
>>>> +	struct mtk_ccifreq_drv *drv;
>>>> +	unsigned long freq, volt;
>>>> +
>>>> +	drv = container_of(nb, struct mtk_ccifreq_drv, opp_nb);
>>>> +
>>>> +	if (event == OPP_EVENT_ADJUST_VOLTAGE) {
>>>> +		freq = dev_pm_opp_get_freq(opp);
>>>> +
>>>> +		mutex_lock(&drv->reg_lock);
>>>> +		/* current opp item is changed */
>>>> +		if (freq == drv->pre_freq) {
>>>> +			volt = dev_pm_opp_get_voltage(opp);
>>>> +			mtk_ccifreq_set_voltage(drv, volt);
>>>> +		}
>>>> +		mutex_unlock(&drv->reg_lock);
>>>> +	}
>>>> +
>>>> +	return 0;
>>>> +}
>>>> +
>>>> +static struct devfreq_dev_profile mtk_ccifreq_profile = {
>>>> +	.target = mtk_ccifreq_target,
>>>> +};
>>>> +
>>>> +static int mtk_ccifreq_probe(struct platform_device *pdev)
>>>> +{
>>>> +	struct device *dev = &pdev->dev;
>>>> +	struct mtk_ccifreq_drv *drv;
>>>> +	struct devfreq_passive_data *passive_data;
>>>> +	struct dev_pm_opp *opp;
>>>> +	unsigned long rate, opp_volt;
>>>> +	int ret;
>>>> +
>>>> +	drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL);
>>>> +	if (!drv)
>>>> +		return -ENOMEM;
>>>> +
>>>> +	drv->dev = dev;
>>>> +	drv->soc_data = (const struct mtk_ccifreq_platform_data *)
>>>> +				of_device_get_match_data(&pdev->dev);
>>>> +	mutex_init(&drv->reg_lock);
>>>> +	platform_set_drvdata(pdev, drv);
>>>> +
>>>> +	drv->cci_clk = devm_clk_get(dev, "cci");
>>>> +	if (IS_ERR(drv->cci_clk)) {
>>>> +		ret = PTR_ERR(drv->cci_clk);
>>>> +		return dev_err_probe(dev, ret,
>>>> +				     "failed to get cci clk: %d\n",
>>>> ret);
>>>> +	}
>>>> +
>>>> +	drv->inter_clk = devm_clk_get(dev, "intermediate");
>>>> +	if (IS_ERR(drv->inter_clk)) {
>>>> +		ret = PTR_ERR(drv->inter_clk);
>>>> +		dev_err_probe(dev, ret,
>>>> +			      "failed to get intermediate clk: %d\n",
>>>> ret);
>>>> +		goto out_free_resources;
>>>> +	}
>>>> +
>>>> +	drv->proc_reg = devm_regulator_get_optional(dev, "proc");
>>>> +	if (IS_ERR(drv->proc_reg)) {
>>>> +		ret = PTR_ERR(drv->proc_reg);
>>>> +		dev_err_probe(dev, ret,
>>>> +			      "failed to get proc regulator: %d\n",
>>>> ret);
>>>> +		goto out_free_resources;
>>>> +	}
>>>> +
>>>> +	ret = regulator_enable(drv->proc_reg);
>>>> +	if (ret) {
>>>> +		dev_err(dev, "failed to enable proc regulator\n");
>>>> +		goto out_free_resources;
>>>> +	}
>>>> +
>>>> +	drv->sram_reg = regulator_get_optional(dev, "sram");
>>>> +	if (IS_ERR(drv->sram_reg))
>>>> +		drv->sram_reg = NULL;
>>>> +	else {
>>>> +		ret = regulator_enable(drv->sram_reg);
>>>> +		if (ret) {
>>>> +			dev_err(dev, "failed to enable sram
>>>> regulator\n");
>>>> +			goto out_free_resources;
>>>> +		}
>>>> +	}
>>>> +
>>>> +	/*
>>>> +	 * We assume min voltage is 0 and tracking target voltage using
>>>> +	 * min_volt_shift for each iteration.
>>>> +	 * The retry_max is 3 times of expeted iteration count.
>>>> +	 */
>>>> +	drv->vtrack_max = 3 * DIV_ROUND_UP(max(drv->soc_data-
>>>>> sram_max_volt,
>>>>
>>>> +					       drv->soc_data-
>>>>> proc_max_volt),
>>>>
>>>> +					   drv->soc_data-
>>>>> min_volt_shift);
>>>>
>>>> +
>>>> +	ret = clk_prepare_enable(drv->cci_clk);
>>>> +	if (ret)
>>>> +		goto out_free_resources;
>>>> +
>>>> +	ret = clk_prepare_enable(drv->inter_clk);
>>>> +	if (ret)
>>>> +		goto out_disable_cci_clk;
>>>> +
>>>> +	ret = dev_pm_opp_of_add_table(dev);
>>>> +	if (ret) {
>>>> +		dev_err(dev, "failed to add opp table: %d\n", ret);
>>>> +		goto out_disable_inter_clk;
>>>> +	}
>>>> +
>>>> +	rate = clk_get_rate(drv->inter_clk);
>>>> +	opp = dev_pm_opp_find_freq_ceil(dev, &rate);
>>>> +	if (IS_ERR(opp)) {
>>>> +		ret = PTR_ERR(opp);
>>>> +		dev_err(dev, "failed to get intermediate opp: %d\n",
>>>> ret);
>>>> +		goto out_remove_opp_table;
>>>> +	}
>>>> +	drv->inter_voltage = dev_pm_opp_get_voltage(opp);
>>>> +	dev_pm_opp_put(opp);
>>>> +
>>>> +	rate = U32_MAX;
>>>> +	opp = dev_pm_opp_find_freq_floor(drv->dev, &rate);
>>>> +	if (IS_ERR(opp)) {
>>>> +		dev_err(dev, "failed to get opp\n");
>>>> +		ret = PTR_ERR(opp);
>>>> +		goto out_remove_opp_table;
>>>> +	}
>>>> +
>>>> +	opp_volt = dev_pm_opp_get_voltage(opp);
>>>> +	dev_pm_opp_put(opp);
>>>> +	ret = mtk_ccifreq_set_voltage(drv, opp_volt);
>>>> +	if (ret) {
>>>> +		dev_err(dev, "failed to scale to highest voltage %lu in
>>>> proc_reg\n",
>>>> +			opp_volt);
>>>> +		goto out_remove_opp_table;
>>>> +	}
>>>> +
>>>> +	passive_data = devm_kzalloc(dev, sizeof(struct
>>>> devfreq_passive_data),
>>>> +				    GFP_KERNEL);
>>>> +	if (!passive_data) {
>>>> +		ret = -ENOMEM;
>>>> +		goto out_remove_opp_table;
>>>> +	}
>>>> +
>>>> +	passive_data->parent_type = CPUFREQ_PARENT_DEV;
>>>> +	drv->devfreq = devm_devfreq_add_device(dev,
>>>> &mtk_ccifreq_profile,
>>>> +					       DEVFREQ_GOV_PASSIVE,
>>>> +					       passive_data);
>>>> +	if (IS_ERR(drv->devfreq)) {
>>>> +		ret = -EPROBE_DEFER;
>>>> +		dev_err(dev, "failed to add devfreq device: %d\n",
>>>> +			PTR_ERR(drv->devfreq));
>>>> +		goto out_remove_opp_table;
>>>> +	}
>>>> +
>>>> +	drv->opp_nb.notifier_call = mtk_ccifreq_opp_notifier;
>>>> +	ret = dev_pm_opp_register_notifier(dev, &drv->opp_nb);
>>>> +	if (ret) {
>>>> +		dev_err(dev, "failed to register opp notifier: %d\n",
>>>> ret);
>>>> +		goto out_remove_devfreq_device;
>>>> +	}
>>>> +	return 0;
>>>> +
>>>> +out_remove_devfreq_device:
>>>> +	devm_devfreq_remove_device(dev, drv->devfreq);
>>>> +
>>>> +out_remove_opp_table:
>>>> +	dev_pm_opp_of_remove_table(dev);
>>>> +
>>>> +out_disable_inter_clk:
>>>> +	clk_disable_unprepare(drv->inter_clk);
>>>> +
>>>> +out_disable_cci_clk:
>>>> +	clk_disable_unprepare(drv->cci_clk);
>>>> +
>>>> +out_free_resources:
>>>> +	if (regulator_is_enabled(drv->proc_reg))
>>>> +		regulator_disable(drv->proc_reg);
>>>> +	if (drv->sram_reg && regulator_is_enabled(drv->sram_reg))
>>>> +		regulator_disable(drv->sram_reg);
>>>> +
>>>> +	if (!IS_ERR(drv->proc_reg))
>>>> +		regulator_put(drv->proc_reg);
>>>> +	if (!IS_ERR(drv->sram_reg))
>>>> +		regulator_put(drv->sram_reg);
>>>> +	if (!IS_ERR(drv->cci_clk))
>>>> +		clk_put(drv->cci_clk);
>>>> +	if (!IS_ERR(drv->inter_clk))
>>>> +		clk_put(drv->inter_clk);
>>>> +
>>>> +	return ret;
>>>> +}
>>>> +
>>>> +static int mtk_ccifreq_remove(struct platform_device *pdev)
>>>> +{
>>>> +	struct device *dev = &pdev->dev;
>>>> +	struct mtk_ccifreq_drv *drv;
>>>> +
>>>> +	drv = platform_get_drvdata(pdev);
>>>> +
>>>> +	dev_pm_opp_unregister_notifier(dev, &drv->opp_nb);
>>>> +	dev_pm_opp_of_remove_table(dev);
>>>> +	clk_disable_unprepare(drv->inter_clk);
>>>> +	clk_disable_unprepare(drv->cci_clk);
>>>> +	regulator_disable(drv->proc_reg);
>>>> +	if (drv->sram_reg)
>>>> +		regulator_disable(drv->sram_reg);
>>>> +
>>>> +	return 0;
>>>> +}
>>>> +
>>>> +static const struct mtk_ccifreq_platform_data
>>>> mt8183_platform_data =
>>>> {
>>>> +	.min_volt_shift = 100000,
>>>> +	.max_volt_shift = 200000,
>>>> +	.proc_max_volt = 1150000,
>>>> +	.sram_min_volt = 0,
>>>> +	.sram_max_volt = 1150000,
>>>> +};
>>>> +
>>>> +static const struct mtk_ccifreq_platform_data
>>>> mt8186_platform_data =
>>>> {
>>>> +	.min_volt_shift = 100000,
>>>> +	.max_volt_shift = 250000,
>>>> +	.proc_max_volt = 1118750,
>>>> +	.sram_min_volt = 850000,
>>>> +	.sram_max_volt = 1118750,
>>>> +};
>>>> +
>>>> +static const struct of_device_id mtk_ccifreq_machines[] = {
>>>> +	{ .compatible = "mediatek,mt8183-cci", .data =
>>>> &mt8183_platform_data },
>>>> +	{ .compatible = "mediatek,mt8186-cci", .data =
>>>> &mt8186_platform_data },
>>>> +	{ },
>>>> +};
>>>> +MODULE_DEVICE_TABLE(of, mtk_ccifreq_machines);
>>>> +
>>>> +static struct platform_driver mtk_ccifreq_platdrv = {
>>>> +	.probe	= mtk_ccifreq_probe,
>>>> +	.remove	= mtk_ccifreq_remove,
>>>> +	.driver = {
>>>> +		.name = "mtk-ccifreq",
>>>> +		.of_match_table = mtk_ccifreq_machines,
>>>> +	},
>>>> +};
>>>> +module_platform_driver(mtk_ccifreq_platdrv);
>>>> +
>>>> +MODULE_DESCRIPTION("MediaTek CCI devfreq driver");
>>>> +MODULE_AUTHOR("Jia-Wei Chang <jia-wei.chang@...iatek.com>");
>>>> +MODULE_LICENSE("GPL v2");
>>>
>>> Hi Chanwoo,
>>>
>>> Just a kindly ping.
>>> Could you please give me some suggestion on this patch?
>>> Thanks!
>>>
>>> BRs,
>>> Johnson Wang
>>>
>>
>> Hi Johnson,
>>
>> Sorry for late reply.But I replied it yesterday as following:
>> Maybe, this reply[1] has not yet arrrived at your mail box.
>> [1]
>>
> https://lore.kernel.org/lkml/0846a062-2ea2-e6d4-03c8-992c2f2e24a0@gmail.com/T/#m3bc609d805d6e74ec7a105be0511926b4afbbaef
>>
>> As I described on reply[1], I updated the patches on devfreq-testing
>> branch. Could you please test your patches based on devfreq-testing
>> branch?
>>
> 
> Hi Chanwoo,
> 
> Thanks for your information.
> I've tested this patch based on the latest devfreq-testing branch.
> It encounters the same crash as Chen-Yu mentioned[1].
> 
> [1]https://lore.kernel.org/linux-pm/YniX1w+oI1eOCmCx@google.com/T/#u

Hi Johnson,

Thanks for the test. I'll drop the last patch caused of crash.
And I'll send v3 patchset right now.


-- 
Best Regards,
Samsung Electronics
Chanwoo Choi

Powered by blists - more mailing lists