| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220509143226.531117-1-foss+kernel@0leil.net>
Date: Mon, 9 May 2022 16:32:23 +0200
From: Quentin Schulz <foss+kernel@...il.net>
To: unlisted-recipients:; (no To-header on input)
Cc: shawnx.tu@...el.com, mchehab@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
foss+kernel@...il.net,
Quentin Schulz <quentin.schulz@...obroma-systems.com>
Subject: [PATCH v3 1/4] media: dt-bindings: ov5675: document YAML binding
From: Quentin Schulz <quentin.schulz@...obroma-systems.com>
This patch adds documentation of device tree in YAML schema for the
OV5675 CMOS image sensor from Omnivision.
Signed-off-by: Quentin Schulz <quentin.schulz@...obroma-systems.com>
---
v3:
- removed clock-names,
- removed clock-frequency,
- added all-of of video-interface-devices schema,
- added clock frequency range in description,
- rephrased definition of supplies,
- fixed name of reset gpio,
- used schema ref for port and port->endpoint,
- removed mentions to driver,
- added HW data transfer speed limitation in comment for
link-frequencies,
- changed root additionalProperties to unevaluatedProperties to not
have to list all properties from video-interface-devices schema, such as
orientation or rotation,
- added maxItems to reset-gpios,
- updated example to use assigned-clocks and assigned-clock-rates
instead of clock-frequency and clock-names,
v2:
- fixed incorrect id,
- fixed device tree example by adding missing dt-bindings headers,
- fixed device tree example by using vcc_1v2 for dvdd supply, as requested
in datasheet,
.../bindings/media/i2c/ovti,ov5675.yaml | 123 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 124 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
new file mode 100644
index 000000000000..f0a48707bed7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Theobroma Systems Design und Consulting GmbH
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5675.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5675 CMOS Sensor
+
+maintainers:
+ - Quentin Schulz <quentin.schulz@...obroma-systems.com>
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+description: |
+ The Omnivision OV5675 is a high performance, 1/5-inch, 5 megapixel, CMOS
+ image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
+ sub-sampled, and windowed 10-bit MIPI images in various formats via the
+ Serial Camera Control Bus (SCCB) interface.
+
+ This chip is programmable through I2C and two-wire SCCB. The sensor output
+ is available via CSI-2 serial data output (up to 2-lane).
+
+properties:
+ compatible:
+ const: ovti,ov5675
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description:
+ System input clock (aka XVCLK). From 6 to 27 MHz.
+ maxItems: 1
+
+ dovdd-supply:
+ description:
+ Digital I/O voltage supply, 1.8 volts.
+
+ avdd-supply:
+ description:
+ Analog voltage supply, 2.8 volts.
+
+ dvdd-supply:
+ description:
+ Digital core voltage supply, 1.2 volts.
+
+ reset-gpios:
+ description:
+ The phandle and specifier for the GPIO that controls sensor reset.
+ This corresponds to the hardware pin XSHUTDN which is physically
+ active low.
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 2
+
+ # Supports max data transfer of 900 Mbps per lane
+ link-frequencies: true
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - dovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/px30-cru.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/pinctrl/rockchip.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov5675: camera@36 {
+ compatible = "ovti,ov5675";
+ reg = <0x36>;
+
+ reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cif_clkout_m0>;
+
+ clocks = <&cru SCLK_CIF_OUT>;
+ assigned-clocks = <&cru SCLK_CIF_OUT>;
+ assigned-clock-rates = <19200000>;
+
+ avdd-supply = <&vcc_1v8>;
+ dvdd-supply = <&vcc_1v2>;
+ dovdd-supply = <&vcc_2v8>;
+
+ rotation = <90>;
+ orientation = <0>;
+
+ port {
+ ucam_out: endpoint {
+ remote-endpoint = <&mipi_in_ucam>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <450000000>;
+ };
+ };
+ };
+ };
+...
+
diff --git a/MAINTAINERS b/MAINTAINERS
index e8c52d0192a6..c7a2d9d3642e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14550,6 +14550,7 @@ M: Shawn Tu <shawnx.tu@...el.com>
L: linux-media@...r.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/ovti,ov5675.yaml
F: drivers/media/i2c/ov5675.c
OMNIVISION OV5693 SENSOR DRIVER
--
2.35.3
Powered by blists - more mailing lists